Integration - Import export

The IST AG LFS1505 conductivity sensor offers a typical cell constant of 0.68 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm (extended range from 10 μS/cm to 200 mS/cm possible with cell-constant correction) within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1505 thin-film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.

The IST AG LFS1710 conductivity sensor offers a typical cell constant of 0.44 cm-1 and a conductivity measuring range from 0.2 mS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1710 thin film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request The IST AG LFS1107 conductivity sensor is available with either Pt/Ni-wires or Cu/Ag-wires with PTFE-insulation (AWG 30) as standard wires.

The IST AG LFS1305 conductivity sensor offers a typical cell constant of 0.86 cm-1 and a conductivity measuring range from 100 μS/cm to 200 mS/cm within an operating temperature range of -30 °C to +100 °C. However, it easily withstands temperatures over 130 °C enabling processes like sterilization by autoclaving. Further advantages of the LFS1305 thin-film conductivity sensor include: — Wide conductivity and temperature range — Fast response time — Optimal accuracy — Resistance to various chemicals1) — Excellent long-term stability — Integrated RTD for temperature compensation — Four-electrode measurement2) — Customer-specific sensor available upon request

The mta OEM soldering robot for integrator can be used for semi or fully automatic operations of selective point to point soldering from above. Thanks to its unique concept, the OEM robot is delivered to the system’s manufacturer with a process guarantee. The OEM robot can be equipped with any of mta’s soldering heads: soldering iron, induction, microflame; except for the mta MLH45 laser head. The 3 or 4 axes of the OEM robot are fully programmable through the mta-MotionEditor software, including soldering parameters such as: Solder quantity, wire feed speed, preheating/postheating times, automatic tip cleaning cycle intervals and other parameters for each soldered point. With its flexible and modular concept, the OEM robot can be fully and easily integrated into a production line.

Modular high performance banding systems for integration into systems.

Banding machines with integrated thermal transfer printers for justintime printing of constant or variable information on raw or preprinted tapes made of paper or foil.

cyclone 075 dc / 300 ac - stirrer drives with magnetic coupling Torque range: 75, 300 Ncm Temperature range: - 50 °C to + 400 °C Pressure range: full vacuum - 500 bar / 6000 psi Stirrer speed: 0 - 2000 / 3000 rpm Materials: stainless steel, Hastelloy®, Tantalum, Titanium, ceramic etc. Buchiglas magnetic stirrer drives (cyclone) are produced for the mixing of chemicals of low to high viscosity in pressurized lab reactors. Cyclone type magnetic stirrer drives have integrated motors and controllers for the stirrer rotation speed.

The compact thermometer measures the process temperature using a Pt100 sensor element (Class A, 4-wire). An optional integrated transmitter converts the Pt100 input signal. In the version with integrated electronics, the device automatically detects the connection variant (IO-Link or 4–20 mA).

With its extra large mounting surface, the Alpha 356 has room for up to seven processing modules. This machine is ideal if you need increased flexibility or have complex processes. Along with the most frequent standard processes of crimping and seal loading, you can obtain a large variety of processing modules such as: fluxing/tinning, twisting the ends of wires, fitting with insulating sleeves and crimping modules for the widest variety of contacts types, ultrasonic or resistance welding modules. You can integrate customer-specific processing stations easily with the ultra-flexible TopWin software.

This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range. The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

The Komax bt 752 crimping press delivers three processes in a single device: stripping, seal loading and crimping. Reliability and top production performance coupled with the user friendly TopTouch interface are the features that make this semi-automatic device such a compelling product. Quality monitored crimping of single and multi-conductor cables is no problem with the semi-automatic bt 752 crimp press, not even when ultra-short stripping lengths are involved. Standard commercial crimping tools (left contact feed) can be used for processing. The controls are on a color touch screen and available in several different languages. System operation is fast, logical and symbol-based with the TopTouch user interface.

The MicroLab 10 enables micrographs to be taken quickly and easily regardless of the location. It covers all relevant processing steps – from cutting and polishing to etching and visualization. The compact carry-case design enables the quality of crimp and splice connections to be assessed with minimum effort and maximum effectiveness. Available in a portable carry-case, the compact MicroLab 10 is designed for contacts and conductors of up to 2.5 mm in diameter. The samples can be quickly clamped in the holder – no re-clamping for all processing steps. The laboratory’s components include autonomous, independent preparation, evaluation and documentation modules. A complete on-site analysis can therefore be performed within a short period of time. A USB digital camera with a microscope is integrated into the lab for visualization purposes and to ensure complete documentation.

The Delta Line Phoenix Drive product family is the next generation of highly integrated motor control solutions. By processing all real-time critical functions within the drive, the Phoenix Drive minimizes communication traffic, reduces controller dimensions and decreases the overall system cost. It also provides axis synchronization, making the Phoenix Drive a cost-effective integrated motion controller. The Phoenix Drive uses EtherCAT high speed communication protocol and is available in two configurations: B100 and B500. Both configurations include system protections such as over current, over and under voltage, overheating, phase-to-phase shorts and ground shorts. These drives control BLDC motors with both 5V encoders and hall effect sensors. The B500 Controller includes brake output of 1.3A and STO (Safe Torque Off).

The Audio Alert Detector converts analog audio alarms on WDP sources into events and transmits them within the WEYTEC KVM system. For example, an acoustic signal can be heard and a visual indication appears on predefined smartTOUCH keyboards and their displays. An overview page documents the status and acknowledgement phase of alarms from individual systems. Alarms and video signals from the relevant computers can also be visualized on a monitor and a video wall, or forwarded to an external system. At a glance Supports all sources with an analog audio output (3.5 mm jack) Hardwarebased No software installations required on sources Acoustic and visual indication in the KVM system Compact design Compatible and integrated with WEYTEC KVM products and solutions