Automation - Import export

XYZ Positioning table - Maximum gripping surface - Reduced drive inertia - Ideal for handling, positioning and storing

Translation-rotation unit - Adjustable speed - Simple and accurate positioning - Compact - Simple installation - Light

Electric gripper with 4 fingers. - Power and speed control - Compact - Accurate - Silent Gripper PE410A is controlled. Hence it is also possible to control the opening position of the gripper.

Ideal automation solutions for loading and unloading of parts on machining centres, presses, measuring stations, etc… Convenient, accurate, repeatable and reliable! The CLA Robot Cell is composed of the following: - A polyarticulated robot or scara with specific grippers - A camera device for part recognition - Automatic camera calibration - Parts loading/unloading system - Protection (cage, mats, detection, etc) - Each application is studied and simulated in order to define the ideal solution - Microplates screening. CLA is a center of expertise of Mitsubishi robots

Manual winding station of watch movements - Control of the number of winding turns - Compact - Accurate - Silent - Ergonomic

Automatic screwdriver with torque measurement Compact station for workbench to ensure your assemblies screwed with high precision torque control. Main features : - Screws feeder by vibrating bowl - Preparation of the next screw in hidden time - Automatic screwdriver with integrated torque sensor - Preparation of the next part in hidden time thanks to the charging carousel - Removable precision tool to ensures a precise positioning and a multi-types parts management - User friendly interface allowing various screwing positions and configurations dedicated by type of parts - Ready to be integrate in assembly line

Automatic screwing station of watch movements - Translation and rotation enable access to all positions of the movement - Small overall dimensions - Automatic screwing system

Demagnetization station of watch movements - Independent or integrated in an SMS line - Small overall dimensions - Demagnetization

CLAremontage Automatic station which wind the movement by the rotor - Loading/unloading unit inserts - Independent station or integrated in an SMS line - Multi-calibers - Winding mechanical watches

Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers

The CLA multi-calibers chronometric Cell is used to monitor and tune the performance of a mechanical watch movement or a watch.

Automation solution to perform medical sample analysis in diagnostic laboratories. Automatic sample distribution system transports the samples directly to the appropriate analysis system

- Standard shuttles 80x80 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology Exemples: - Assembly line for watch movements - Manual or automatic assembly line - Ergonomic assembly workstation - Manual assembly line

- Standard shuttles 48x48 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology - Intelligent conveyor for industrial automation with production traceability Examples: - Assembly line for balance-springs - Assembly line for barrels and the control - Flexible transfer line

The EBATmètre® is a device for measuring height clearances. It is principally used to measure the moving parts of a mechanical watch movement.

The NEOvario is a high-technology device, which is completely compact and integrated. The measuring devices will meet the demanding needs of torque and force measurement fields. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - Adjustable angular support - Anti-vibration table

VARIOcouple® The VARIOcouple® apparatus for torque and force measurement manufactured by CLA is a very precise instrument mainly used in development laboratories of watchmakers. This instrument allows quantifying and analyzing small torques and forces generated in low stress systems. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - CLApt1000 - Temperature sensor - Adjustable angular support - Anti-vibration table

The BARImeter® is a precision metrology device that offers a great flexibility in the measurement of microtechnical, horological and medical parts. In particular, it is possible to measure small friction torques in both directions of rotation as well as holding torques. Examples: - Barrel measurement - Friction-wheel measurement

To meet the growing and increasingly complex demand for machine vision systems, CLA has developed the CLAsight® solution. It is a package consisting of hardware (frame, camera, optics, lighting and industrial computer) and a versatile vision software application for positioning, aesthetic or dimensional inspection, time measurement by direct reading of hands, dial and date, and optical character recognition (OCR). Adapted to your needs, it will be the eye of your robot or the controller of your parts. Application example : - OCR Vision system - Reading of the hands of a movement or a watch - Aesthetic inspection - Positioning of microtechnical parts

The CLA low vibration XY table enables to perform movements on the X and Y axis through Ethernet commands. This equipment is ideal for micro plate analysis by camera. Specifications: - Micro plates dimension 130X90mm - Motion control in position by Ethernet protocol - Configurable motion speed and acceleration - Accurate and vibration-free positioning enables optimal reading - Optional vibration of micro plates in reading position to agitate the liquid

The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. The design of that sensor is specially made for a high resonance frequency.

The CLA LC-01 and LC-1 are bidirectional, inductive type force sensors. The measurement system is composed of a displacement transducer which mobile core is linked to two leaf copper beryllium springs. The spring flexion measurement, which is proportional to the force to be measured, is performed by inductive sensor with carrier frequency. The measurement shaft is interchangeable, allowing the use of special shaft.

The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ranges. Gain and offset can be adjusted with potentiometers to allow calibration of the sensor. There is also the Digimes Compact, dedicated to one sensor.

The CLA TSF-000 through TSF-5 are bidirectional, inductive type torque sensors. The measurement system is composed of an axis mounted on flexible pivots with cruciform springs allowing frictionless torque measurement. The axis rotation angle measurement, which is proportional to the measured torque, is performed via an inductive displacement sensor with carrier frequency. The small rotation angle, approximately 1° for all measurement range, allows very good linearity and negligible hysteresis.

In order to measure torque and force, a large range of sensors is available. All these sensors are bidirectional, inductive or resistive type with a good linearity and negligible hysteresis. These sensors allow to measure torque less than 1 uNm and up to 1 Nm.

With the new Automated Card Production System for inline die-cutting, collating and stacking of playing cards you can die-cut a wide range of cards including playing cards, gaming cards, trading cards and sports cards and they can be stacked and delivered in one step. The system consists of the market leading BSR 550 Servo rotary die-cutter, feeding into the ACC 550 HS Automatic Card Collator. The cards are die-cut nick-free, stripped out inline, shingled and fed to the ACC 550 HS Card Collator via a conveyor belt. The ACC 550 HS stacks each row into a complete deck and feeds it to a downstream packaging system that may include over wrappers, banding machines, packaging machines or packing table conveyors. With production rates of up to 2,000 decks per hour, the highest quality cutting, makeready times in under 1 hour and an automated delivery that reduces labor to a single person, the BOGRAMA Automated Card Production System has the ROI needed to be the market leader.

High-pressure systems can be automated easily and effectively by using Nova Swiss valves with air-operated actuators. The valve bodies and packing systems are identical to those in the manual valves and provide the same benefits. The extremely robust and reliable air-operated piston actuator is available in two versions: ATO (air-to-open), opens with compressed air. ATC (air-to-close), closes with compressed air.

Sampling systems for manual and automated sampling Systems for manual and automated sampling (up to 4 samples per run) during pressure reactions, see also Parallel Pressure Reactor system PPR. Sampling system for pressure reactors, Sampling with the reactor under pressure, with immersion tube and filter, sampling cylinder, Connection for flushing the lines and sampling cylinder

Extended use of Motion Control technology, optimized processes in the delivery, redesigned threeknife trimmer, userfriendly operating concept – the Primera PRO, which runs at 14,000 cycles per hour, significantly shortens the setup and throughput times for your jobs, thus increasing your profitability. Thanks to its high level of format variability and its wide range of feeders, the Primera PRO is the ideal saddle stitcher for a wide range of products – for short runs as well as longer runs.