Level it - Import export

The high-precision multi-parameter probes of the 36XiW-CTD series measure conductivity and temperature as well as pressure, along with the depth of bodies of water. Temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). The sensors can be supplied with either an RS485 or SDI-12 interface. Extended lightning protection comes as standard with the SDI-12 and is available as an option for the RS485 interface.

The level sensors of the 46X-Ei series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output. Intrinsically safe – suitable for use in explosive atmospheres.

In the high-precision level pressure transmitters of the 36XW-Ei series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option. Intrinsically safe – suitable for use in explosive atmospheres.

The level sensors of the 26Y-Ei series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications. Intrinsically safe – suitable for use in explosive atmospheres.

With a small diameter of just 16 mm, these level sensors are ideally suited to use in small spaces, such as narrow monitoring pipes. The measurement results can be read out via the 4...20 mA output or the RS485 interface. Extended lightning protection is integrated as standard.

The high-precision level sensors of the 36XiW series measure with ultra-high accuracy and resolution. Temperature dependence and nonlinearity are precisely compensated for in the microprocessor by means of a mathematical model. They can be supplied with either an RS485 or SDI-12 interface. In addition to the pressure sensor for the level measurement, it is also possible to integrate a Pt1000 that is calibrated to ±0,1 °C from 0...50 °C. Extended lightning protection comes as standard with the SDI-12 interface and is available as an option for the RS485 interface.

The level sensors of the 46X series combine a ceramic measuring cell for very low measuring ranges on the mbar scale with microprocessor electronics for compensating for temperature dependence and nonlinearity. In addition to the digital RS485 interface, the sensors also have a rangeable analog output.

The 36KyX series was specially developed for brackish water and sewage applications. It is equipped with a non-fouling Kynar separating diaphragm, which combines the anti-adhesion properties of PTFE with outstanding hardness and abrasion resistance. This level sensors design can be readily installed in harsh environments, eliminating the need for bulky, costly protective equipment. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal.

The level sensors of the 26Y series are budget-friendly, but still offer high accuracy and excellent long-term stability. They are available in versions for absolute or relative pressure. With a start-up time of just 5 ms, the Y line is ideally suited to data logger applications.

In the high-precision level sensors of the 36XW series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option.

The DCX-22 data loggers achieve greater measurement accuracy than loggers with a smaller diameter. Thanks to their long-life battery, they can keep measuring the water level, water pressure and temperature for years (up to 10 years at a rate of one measurement per hour). The data logger can be configured using the supplied software (measurement interval, incident management, delayed measurement start etc.) and data that has been read can be displayed in a graph or chart, corrected using air pressure values, converted into fill levels or other units, and exported.

Turbimax CUS71D continuously monitors the separation and transition zones in clarification and settling tanks, ensuring safe, economic and efficient sedimentation processes. It provides you with reliable, real-time measured values in real-time for quick control of valves and actuators. Turbimax CUS71D is ideal sensor for every measuring task - from protection of downstream water in wastewater treatment plants to optimization of backwash times in waterworks.

Our advanced broad-spectrum formula, with CBD and minor cannabinoids from our high-quality plant honey is THC free. Our oils are produced by top scientists using the finest organic ingredients to guarantee a unique flavor and nuance, available with MCT or hemp seed oil. 100% Swiss Quality. Available in different concentration levels. Available in White Label or Private Label. MOQ 500 pcs for private label. Lab tested for safety and purity. Price on request.

The compact Deltapilot FMB50 transmitter with the condensate resistant Contite measuring cell is typically used in the process and hygienic applications.It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. For use in SIL2 safety systems.

Soliphant FTM50 is a robust point level switch for use in silos containing fine-grained or powdery solids even with a low bulk density. Suitable for a wide range of applications with international certificates for use in dust or gas hazardous areas. Available with polished fork and stainless steel housing with Tri-Clamp or with aluminum housing and coated fork. Maintenance-free device for use in typical applications like: cereals, flour, cocoa, sugar, animal feed, dye powder, chalk.

Liquiphant FTL33 is a point level switch for liquids. The FTL33 is especially designed for food & beverage applications where hygienic requirements are requested. The Liquiphant is used for overfill prevention or pump dry-run protection preferably in storage tanks, mixing vessels and pipes.Compact: — Smallest vibronic sensor in the market Safe: — Continuous self-monitoring — Reliable switching independent of media properties Easy: — No calibration or adjustment — Plug & play

Liquiphant FTL81 is a point level switch for use in hazardous areas with all international certificates. FailSafe overfill prevention in applications with functional safety up to SIL3 with one device. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

The Deltapilot FMB70 with the condensate resistant Contite measuring cell and two-chamber housing is typically used in the process and hygienic applications. It is made for level measurement in liquid and paste-like media in open or closed containers and unaffected by possible foam formation. The integrated HistoROM/M-DAT data module makes management of process and device parameters easy. Designed according to IEC 61508 for use in SIL3 safety systems.

Liquicap FMI51 is a reliable fully insulated rod probe for continuous level monitoring in liquids, particularly in build-up forming media and extremely high temperatures. The measurement is independent of the dielectric constant (dc). Used in conjunction with Fieldgate FXA320 (remote measured value interrogation using Internet technology), Liquicap is an ideal solution for Inventory Management Solutions.

Liquiphant FTL51 is a point level switch with extension tube for use in hazardous areas with all international certificates. Useable in all industries. FTL51 offers functional safety SIL2/SIL3. With the second line of defense highest degree of safety and availability of the device can be guaranteed. Reliable measurement values, not affected by: changing media properties, flow, turbulences, gas bubbles, foam, vibrations or build-up.

Micropilot FMR67 is the first 80GHz radar developed according to the international functional safety directive IEC 61508. It offers maximum reliability due to the drip-off antenna, improved focusing and very small emitting angles which is perfect for the measuring in slim silos. FMR67 is used for continuous, non-contact level measurement in powdery to granular bulk solids. FMR67 also possesses the smart sensor functionality Heartbeat Technology.

Liquiphant FTL31 is a point level switch for liquids. The FTL31 is designed for industrial applications in all industries, mainly the machinery industry. The Liquiphant is used for overfill prevention or pump dry-run protection in cleaning and filter systems as well as in cooling and lubrication vessels.Compact: — Smallest vibronic sensor in the market Safe: — Continuous self-monitoring — Reliable switching independent of media properties Easy: — No calibration or adjustment — Plug & play

The Gammapilot FMG50 compact transmitter is designed for non-contact point level detection, continuous level, interface and density measurement in liquids, solids, suspensions or sludges. As the first true 2-wire loop powered compact transmitter it minimizes engineering and installation efforts.

The Nivector FTI26 is a cost-efficient point level switch for solids in the food industry and powder applications in all industries. The capacitance device convinces with the best build-up performance in class and a high sensitivity. All industry compliant certificates are available. In addition, the FTI26 is industry 4.0 ready with IO-Link communication.

The Waterpilot FMX21 transmitter with capacitive, oil-free ceramic measuring cell is typically used in the process and environmental applications for hydrostatic level measurement. With HART output, the measuring ranges can be freely adjusted and a density-compensated level measurement can be activated. It is certified for drinking water and offers integrated temperature measurement. Versions for applications in wastewaters and sludges or usage in salt water are also available.

The Liquipoint FTW23 is developed and built for the food industry and meets all international hygiene requirements. It is intended for use in applications in liquid media without build-up.Efficient: — Cost effective — Function check with test magnet Easy: — No calibration or adjustment required — Plug & play without any specific tools

The economical Soliswitch FTE20 is a paddle switch for point level detection in bulk materials. Its robust polymer housing and compact design makes it an ideal sensor for full, empty and demand alarm in applications with bulk solids. The optimized polymers make the unit outstandingly robust and therefore suitable for use in dust explosive areas according the latest standards.

Micropilot FMR60 is the first 80GHz radar developed according to the international functional safety directive IEC 61508. The free space radar offers maximum reliability due to the drip-off antenna, improved algorithms and small beam angle. It is used for continuous non-contact level measurement of liquids, pastes and slurries. The measurement is not affected by changing media, temperature changes, gas blankets or vapors. It also possesses the smart sensor functionality Heartbeat Technology.

The FDU91 ultrasonic sensor for continuous, non-contact and maintenance-free level measurement of fluids, pastes, sludges and powdery to coarse bulk materials. But also for flow measurement in open channels and measuring weirs. The measurement is unaffected by dielectric constant, density or humidity and also unaffected by build-up due to the self-cleaning effect of sensors. Suited for explosion hazardous areas. Maximum measuring range in liquids 10m (33ft), solids 5m (16ft).