Flexibility - Import export

The IST AG IV4 biosensor is a flexible stripe with large form factor ideal for direct dipping in the measurement media. It is designed for the detection of a single analyte, glucose as standard. This sensor is ideal for applications that require in-line continuous measurement with high reliability. Further advantages of the IV4 biosensor include: — Excellent long-term stability — Long shelf life — Gamma and beta sterilization compatible — Fast response time and outstanding reliability — Reference, counter and blank electrodes on-chip Given its compatibility with gamma radiation, the IV4 sensor can be used for example in bioreactors or aseptic media.

From: Aluminium oxide Crocus Silicon carbide

The ASCOJET 1708 Combi Blaster is the first ASCOJET dry ice blasting unit which allows the use of an additional blasting material in the dry ice stream and therefore offers the best combination of gentle cleaning with dry ice pellets and the additional abrasive effect of a carefully selected additive. This dry ice blasting unit is powerful, handy, minimal secondary pollution and reduced noise emission thanks to low air consumption – The ASCOJET 1708 Combi Blaster is perfectly suitable for industrial end users of all kinds.

Properties Rapid and flexible solution for temporary placement of the vibrator Sturdy and simple construction Simple connection, together with a vibrator to a compressed air supply Field of application Any place where short term vibrating needs to be carried out On silos, transport container or pipes A smooth, neat and not too curved surface improves the grip of vacuum mountings

Flexible endless abrasive belts + holder with corundum with diamond

The special feature of the new DiaFlex fan-out connection is that the fiber whips can be removed and replaced via a connector system in the divider. This provides greater flexibility in the installation of fiber-optic networks. Cable ends can be replaced flexibly, quickly and without spending a great deal of time or money, and cable installations can be extended as is necessary. Thanks to the feed-in cap, which has a small design, preassembled cables can be inserted directly into pipes or cable ducts. There is therefore no need for expensive splices. The cable and the fiber whips are manufactured in the fiber design and quantity that you requested, inspected and delivered with the corresponding test reports. The DiaFlex contains a DIAMOND multi-fiber connector (MFS) for 12 fibers (24 upon request). - Replaceable fiber whips - Protective cap with feed-in eye - Simple to use on site and no expensive splicing work necessary - Robust metal fiber divider

Combined press paper/polyester (two and three layers) DMD non-saturated and saturated Nomex ®/Mylar ®/Nomex ® 50µm and 80µm (NMN) Interphase insulation NMN411 Nomex ®/Kapton ®/Nomex ® (NKN) With self-bonding coating

Combined press paper/polyester (two and three layers) DMD non-saturated and saturated Nomex ®/Mylar ®/Nomex ® 50µm and 80µm (NMN) Interphase insulation NMN411 Nomex ®/Kapton ®/Nomex ® (NKN) With self-bonding coating

Vulcanised fibre (95°C) Pressboard (PSP) in rolls and sheets (105°C) Nomex ® Aramide paper

Vulcanised fibre (95°C) Pressboard (PSP) in rolls and sheets (105°C) Nomex ® Aramide paper

CYK10 guarantees absolute water-proof connection of Memosens sensors to the transmitter. Its inductive coupling shows no contact corrosion and guarantees galvanic isolation of transmitter and medium. Simply forget about limited cable length, interfering potentials or moisture and benefit from completely safe and reliable signal transmission.

CENTRAX CU3000 / CU5000 combines the functionality of a highly accurate instrument for heavy current application with the possibilities of a freely programmable PLC in one housing. This makes the need of a separate control, a control system, a remote display or an additional data collector superfluous.

The Presto II Digital saddle stitching system enables new saddle stitching options and, in combination with digital printing, makes it possible to tap into new segments. The system enables customized magazines, catalogs and teaching materials, as well as personalized print products to be produced efficiently to high quality standards, down to print runs of one copy with variable product thicknesses. The Presto II Digital can be precisely configured for both offset as well as digital printing.

3D-Modular workholding system with high flexibility

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 70 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 165 mm, with a production rate of up to 80 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The HOTmatic AMP 509 is the ideal hotformer for the costefficient production of forgings with a diameter of up to 108 mm, with a production rate of up to 100 parts per minute. Main advantages Wide range of uses, Intuitive operation, Triedandtested, efficient cooling system for maximum tool service life, High availability due to short retooling times, High material efficiency thanks to servoinfeed and electronic bar end elimination device (ESA 600)

The iTHERM TMS31 is a versatile, modular multipoint temperature assembly designed for temperature average detection and profiling in grain, organic bulk material storage silos and in oil, fuel storage tanks., The device’s mechanical robustness and accurate temperature sensors offer the necessary characteristics for safe, reliable and economic product storage operations. In its standard configuration it is available with up to 20 thermocouple (TC) or RTD sensors fitted to a primary metal rope.

This fully automatic crimping machine stands out from the rest for the high daily productivity it achieves through short changeover times and high availability. This thoroughly tried-and-tested machine is also available with a belt drive. That means optimum force transmission and increased output for long and difficult to process conductors. A supplementary unit that is ideal for a broad processing range. The Komax Gamma 333 PC and PC-B are flexible fully automatic crimping machines offering a variety of efficient processing capabilities. Depending on requirements, these machines can apply two-ended crimp contacts and end sleeves for strands, as well as double crimp connections with three different contacts or seals and sleeves to one end of the cable. Tinning and ink-jet marking are two further options. These models can integrate customer-specific applications like MIL crimping, welding or compaction for a further diversification of production.

Seamless quality control is becoming an ever important factor in competition. Micrographs are indispensable in the release of new crimp terminals and tools. The highly flexible and modular MicroLab 55 micrograph laboratory is a central part of modern quality engineering. The MicroLab 55 micrograph laboratory is designed for the most versatile application ranges and is ideally suited for this purpose. It enables micrographs to be produced for all types of crimps available on the market – both transverse section and longitudinal section. The above applies also to products such as PCBs or housings from outside the automotive sector. Extremely short processing times can be achieved thanks to the optimum arrangement of the individual modules. Reproducible sample preparation is guaranteed to be perfect because the sample does not have to be re-clamped between the individual processing steps.

Consistent high productivity and flexibility with maximum precision are the requirements fully automated wire processing has to meet, both today and in the future. The Alpha 550 – the latest fully automatic wire processing machine for two-sided seal insertion – meets these requirements across the entire spectrum with revo­lutionary technology. The Alpha 550 can yield crucial competitive advantages with its unmatched unit cost performance, flexible production output and superb quality. The machine comes with an ACD automatic conductor detector as a standard feature.

3- or 4-axis execution Top mounting Work range: 1200 mm Payload: up to 3 kg

With the continuous and seamless conveying system Easychain, even narrower curve radii can be realized than with the „bigger brother“ Deniway. This is particularly noticeable when complex, three-dimensional layouts are required. In addition, the highly modular system can be quickly installed and converted. The system is based on rollers that reduce friction and thus both energy consumption and wear. That is why Easychain is robust, reliable and largely maintenance-free.