Results for
Switzerland
The Digimes Universel is a 5 KHz carrier current bridge for resistive, inductive or differential transformer transducers connected in full or half bridge. The sensitivity is adjustable by the user between 2 mV/V and 100 mV/V according to six measuring ranges. Gain and offset can be adjusted with potentiometers to allow calibration of the sensor. There is also the Digimes Compact, dedicated to one sensor.
Request for a quoteSwitzerland
The CLA TSF-000 through TSF-5 are bidirectional, inductive type torque sensors. The measurement system is composed of an axis mounted on flexible pivots with cruciform springs allowing frictionless torque measurement. The axis rotation angle measurement, which is proportional to the measured torque, is performed via an inductive displacement sensor with carrier frequency. The small rotation angle, approximately 1° for all measurement range, allows very good linearity and negligible hysteresis.
Request for a quoteSwitzerland
The CLA LC-01 and LC-1 are bidirectional, inductive type force sensors. The measurement system is composed of a displacement transducer which mobile core is linked to two leaf copper beryllium springs. The spring flexion measurement, which is proportional to the force to be measured, is performed by inductive sensor with carrier frequency. The measurement shaft is interchangeable, allowing the use of special shaft.
Request for a quoteSwitzerland
The CLA SC-002 is bidirectional, resistive type force sensor. The measurement system is composed of a semiconductor strain gage. The measurement shaft is made of a 0.5mm diameter axis with a positioning notch for calibration and measurement. The design of that sensor is specially made for a high resonance frequency.
Request for a quoteSwitzerland
In order to measure torque and force, a large range of sensors is available. All these sensors are bidirectional, inductive or resistive type with a good linearity and negligible hysteresis. These sensors allow to measure torque less than 1 uNm and up to 1 Nm.
Request for a quoteSwitzerland
Automatic screwdriver with torque measurement Compact station for workbench to ensure your assemblies screwed with high precision torque control. Main features : - Screws feeder by vibrating bowl - Preparation of the next screw in hidden time - Automatic screwdriver with integrated torque sensor - Preparation of the next part in hidden time thanks to the charging carousel - Removable precision tool to ensures a precise positioning and a multi-types parts management - User friendly interface allowing various screwing positions and configurations dedicated by type of parts - Ready to be integrate in assembly line
Request for a quoteSwitzerland
Automatic screwing station of watch movements - Translation and rotation enable access to all positions of the movement - Small overall dimensions - Automatic screwing system
Request for a quoteSwitzerland
Demagnetization station of watch movements - Independent or integrated in an SMS line - Small overall dimensions - Demagnetization
Request for a quoteSwitzerland
Manual winding station of watch movements - Control of the number of winding turns - Compact - Accurate - Silent - Ergonomic
Request for a quoteSwitzerland
CLAremontage Automatic station which wind the movement by the rotor - Loading/unloading unit inserts - Independent station or integrated in an SMS line - Multi-calibers - Winding mechanical watches
Request for a quoteSwitzerland
Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers
Request for a quoteSwitzerland
The CLA multi-calibers chronometric Cell is used to monitor and tune the performance of a mechanical watch movement or a watch.
Request for a quoteSwitzerland
Automation solution to perform medical sample analysis in diagnostic laboratories. Automatic sample distribution system transports the samples directly to the appropriate analysis system
Request for a quoteSwitzerland
- Standard shuttles 80x80 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology Exemples: - Assembly line for watch movements - Manual or automatic assembly line - Ergonomic assembly workstation - Manual assembly line
Request for a quoteSwitzerland
- Standard shuttles 48x48 mm - RFID technology - SMS management by routing software OMS - Mainly used by watchmaking sector and microtechnology - Intelligent conveyor for industrial automation with production traceability Examples: - Assembly line for balance-springs - Assembly line for barrels and the control - Flexible transfer line
Request for a quoteSwitzerland
The EBATmètre® is a device for measuring height clearances. It is principally used to measure the moving parts of a mechanical watch movement.
Request for a quoteSwitzerland
The NEOvario is a high-technology device, which is completely compact and integrated. The measuring devices will meet the demanding needs of torque and force measurement fields. ACCESSORYS : - Universal Digimes - Universal sample holder for watch movement - VARIOweight - Measurement standard - Adjustable angular support - Anti-vibration table
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Switzerland
The BARImeter® is a precision metrology device that offers a great flexibility in the measurement of microtechnical, horological and medical parts. In particular, it is possible to measure small friction torques in both directions of rotation as well as holding torques. Examples: - Barrel measurement - Friction-wheel measurement
Request for a quoteSwitzerland
Automation with direct impact: BARImètre® Automat can absorb 150 barrels per measuring channel (4 channels max). Load your machine, press START and the Automat will do the rest.
Request for a quoteSwitzerland
To meet the growing and increasingly complex demand for machine vision systems, CLA has developed the CLAsight® solution. It is a package consisting of hardware (frame, camera, optics, lighting and industrial computer) and a versatile vision software application for positioning, aesthetic or dimensional inspection, time measurement by direct reading of hands, dial and date, and optical character recognition (OCR). Adapted to your needs, it will be the eye of your robot or the controller of your parts. Application example : - OCR Vision system - Reading of the hands of a movement or a watch - Aesthetic inspection - Positioning of microtechnical parts
Request for a quoteSwitzerland
The CLA low vibration XY table enables to perform movements on the X and Y axis through Ethernet commands. This equipment is ideal for micro plate analysis by camera. Specifications: - Micro plates dimension 130X90mm - Motion control in position by Ethernet protocol - Configurable motion speed and acceleration - Accurate and vibration-free positioning enables optimal reading - Optional vibration of micro plates in reading position to agitate the liquid
Request for a quoteSwitzerland
XYZ Positioning table - Maximum gripping surface - Reduced drive inertia - Ideal for handling, positioning and storing
Request for a quoteSwitzerland
Translation-rotation unit - Adjustable speed - Simple and accurate positioning - Compact - Simple installation - Light
Request for a quoteSwitzerland
Electric gripper with 4 fingers. - Power and speed control - Compact - Accurate - Silent Gripper PE410A is controlled. Hence it is also possible to control the opening position of the gripper.
Request for a quoteSwitzerland
Ideal automation solutions for loading and unloading of parts on machining centres, presses, measuring stations, etc… Convenient, accurate, repeatable and reliable! The CLA Robot Cell is composed of the following: - A polyarticulated robot or scara with specific grippers - A camera device for part recognition - Automatic camera calibration - Parts loading/unloading system - Protection (cage, mats, detection, etc) - Each application is studied and simulated in order to define the ideal solution - Microplates screening. CLA is a center of expertise of Mitsubishi robots
Request for a quoteResults for
Systems equipment - Import exportNumber of results
26 ProductsCountries
Company type