Measuring instruments - Import export

As a Signal Conditioner, the AN1500M is designed to process and display signals coming from various types of transducers (weight, load, pressure, torque, etc.) that use standard strain-gauge bridges. As a Load Monitor the AN1500M can also receive any signal within the ±150mVDC range coming from a shunt, a converter or any type of transmitter. The Load Monitor provides selectable input ranges (±15mV, ±30mV, ±150mV) and excitation voltages (5V, 10V) to accommodate cells of various types and sensitivities. Two programming methods allow scaling of the meter to operate in the desired engineering units. The basic instrument is a soldered assembly composed of a main board, a tri-color programmable display and a power circuit. Standard features include the reading of the input variable as well as remote (HOLD), the reading and memorization of minimum/maximum values (PEAK/VALLEY), TARE and RESET function, and a full complement of programmable logic functions.

Magtrol’s Cogging Test System is a stand-alone test system designed to control and measure Detent Torque, Cogging Torque and Friction Torque. The test System includes a precision geared motor, a TS Series Torque Sensor integrating a 5 000 pulses encoder. CTS 100 to CTS 102 have a built-in security clutches to avoid system overload by mishandling when not in use. The geared motor drives the MUT (Motor Under Test) at a low speed from 1 to 10 rpm (respectively 8 rpm for CTS 103 and CTS 104), while acquiring its cogging torque related to angle position. The torque measurement covers a range up to 1 N∙m (depending on the selected torque sensor) with an accuracy of ± 0.1 mN∙m (for TS 100 – 50 mN∙m and TS 101 – 100 mN∙m). The executable software controls the system and displays acquired data. It provides accurate peak-to-peak measurement of cogging torque and displays X-Y or polar graphs as well as FFT analysis. ... more information www.magtrol.com

Magtrol’s Model DSP7000 High Speed Programmable Dynamometer Controller employs state-of-the-art Digital Signal Processing Technology to provide superior motor testing capabilities. Designed for use with any Magtrol Hysteresis, Eddy-Current or Powder Dynamometer, Magtrol In-Line Torque Transducer or auxiliary instrumentation, the DSP7000 can provide complete PC control via the USB or optional IEEE-488 or RS-232 interface. With up to 500 readings per second, the DSP7000 is ideally suited for both the test lab and the production line.

The TSC Series is the Torque and Speed Conditioner used to connect Magtrol Eddy-Current (WB) or Powder (PB) Dynamometers to the DSP7000 Dynamometer Controller. Powered by the dynamometer controller, and based on a precision instrumentation amplifier, the unit amplifies and filters the torque signal. It also provides power and connections for the speed pickup sensor which is located in the dynamometer.

Magtrol’s Model 3411 Torque Display is designed for use with all Magtrol TS, TM, TMHS, TMB and TF Torque Transducers. This easy-to-use device powers the transducer and utilizes high speed processing to display torque, speed and mechanical power. It includes a tare function to help offset any slight residuals caused by couplings or suspended loads. The 3411 may also be used with any torque sensors requiring 24 V DC power (500 mA max.) with ± 5 V DC torque output (± 10 V DC max.) and open collector, TTL or CMOS output for the speed signal.

The AN2000C Signal Conditioner & Display is designed to process and display signals coming from various types of transducers (weight, load, pressure, torque, etc.) that use standard strain-gauge bridges. It can also receive any signal within the range ±300mVDC coming from a shunt, a converter or any type of transmitter. The Conditioner provides selectable input ranges (max. ±300mV) and excitation voltages (5V, 10V) to accommodate cells of various types and sensitivities. Two programming methods allow scaling of the meter to operate in the desired engineering units. The basic instrument consists of a PCB assembly including the main board, the display and the power supply filter, to which the A/D conversion circuit and the input option are added. The functions of the basic instrument include the display of the input variable as well as the remote freezing of the display (HOLD), the reading of the stored minimum and maximum values (PEAK & VALLEY) and the TARE function with RESET.

Magtrol's new PSD hand-held indicator is a stand-alone unit powered by 3 AA batteries or via USB. It is very compact (~160 x 80 x 50 mm) and can be easily carried and used on a civil engineering site, in a research & development office or laboratory as well as in production shop. Its case is ergonomic, waterproof (IP54) and protected by a rubber shock absorber. It is suitable to any type of strain gauge transducers, being a load cell, a load pin or a reaction torque sensor. The internal amplifier can process signal range of ±0.3 ... 5 mV/V. The new PSD Portable Display is very flexible and complies with the highest specification in terms of accuracy (0.01%) and measurement frequency (1600/s). It allows to store up to 16 programmable measurement ranges which can be configured either directly on the unit or via its USB interface and dedicated software (included). Multiple force or torque transducers can be connected for which actual data as well as the ... read more: www.magtrol.