Results for
MAXON MOTOR AG
Switzerland
The EPOS2 Module 36/2 is an OEM positioning controller plug-in module for brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 72 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 24/2 DC/EC is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder up to 48 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 24/2 EC is a modular digital positioning controller. Matched with brushless EC motors with Hall sensors and encoder up to 48 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The DEC Module 50/5 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 250 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 P 24/5 is a freely programmable positioning controller according IEC 61131-3. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 70/10 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 80 to 700 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 24/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 120 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The DEC Module 24/2 (Digital EC Controller) is a 1-quadrant amplifier for controlling EC motors with Hall sensors with a maximum output of 48 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The EPOS2 50/5 is a modular digital positioning controller. Matched with brushed DC motors with encoder or brushless EC motors with Hall sensors and encoder, from 5 to 250 watts.
Request for a quoteMAXON MOTOR AG
Switzerland
The ESCON Module 24/2 is a small-sized, powerful 4-quadrant PWM OEM servo controller for the highly efficient control of permanent magnet-activated brushed DC motors and brushless EC motors up to approximately 48 Watts.
Request for a quoteCAMILLE BAUER METRAWATT AG
Switzerland
Customer benefit • Consistent measurement (without interruption) • Suited to strongly distorted systems, zero crossing or phase-angle controls • I/O interface adaptable to individual requirements • Configuration and measured value acquisition via USB and Modbus interface • Acquisition of minimum and maximum values with time stamp • System analysis (harmonics and unbalance) • Synchronisable real-time clock as a time basis and operating hour counter • Graphic display with freely arranged measured value display and alarm handling • Logger for long-term recording of measured value progressions
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteCLA CLINICAL LABORATORY AUTOMATION SA
Switzerland
Automatic station for rate control of watch movements or watches without straps - Measure at 0 and 24h - Integrated 24h Storage - Possibility to add measuring devices - Power reserve control e.g. 72h - Using a robot - Multi-calibers
Request for a quoteRUMUL RUSSENBERGER PRÜFMASCHINEN AG
Switzerland
This machine type is available in several force ranges; detailed information can be found in the prospectus
Request for a quoteASCO CARBON DIOXIDE LTD
Switzerland
The ASCO CO2 Flowmeter has been developed to accurately measure CO2 gas flow in closed pipes. The power unit, which supplies 230 V, operates a microprocessor controlled flow computer and one sensor. The ASCO CO2 Flowmeter is a complete system which is supplied fully calibrated and wired and therefore very easy to install.
Request for a quoteASCO CARBON DIOXIDE LTD
Switzerland
The ASCO Dry Ice Pelletizer P55i is one of the most powerful dry ice machines from ASCO's iSeries line. Having a production capacity of 550 kg/h (1'212 lb/h) it meets the demands for high dry ice quantities plus quality and flexibility in the daily working process. As a model of ASCO's iSeries, it is equipped with stateoftheart remote control devices and thus is ready for a wide range of services in the areas of Remote Access, Remote Data, Remote Management. Be it for fast and efficient trouble shooting and maintenance or for gathering production and performance data the ASCO iSeries offers a wide range of possibilities to link Industry 4.0 with dry ice production. The ASCO Dry Ice Pelletizer P55i is driven by two powerful hydraulic units, which are running independently by the push of a button. This allows the production of identical or different pellet sizes in combination with the offered extruder plates at the same time.
Request for a quoteASCO CARBON DIOXIDE LTD
Switzerland
The ASCO Dry Ice Pelletizer P28i is a compact and powerful dry ice machine from our iSeries line. Having a production capacity of 280 kg/h (617 lb/h) it meets the demands for higher dry ice quantities plus quality and flexibility in the daily working process. As a model of ASCO's iSeries, it is equipped with stateoftheart remote control devices and thus is ready for a wide range of services in the areas of Remote Access, Remote Data, Remote Management. Be it for fast and efficient trouble shooting and maintenance or for gathering production and performance data the ASCO iSeries offers a wide range of possibilities to link Industry 4.0 with dry ice production. The ASCO Dry Ice Pelletizer P28i is driven by a powerful hydraulic unit featuring instant push button start. All functions are controlled by a Siemens PLC with touch screen.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KARL SCHUPP AG
Switzerland
Fluoropolymers (ETFE, FEP, PTFE, PFA) Silicone, PEEK ™, Kapton ® Also available in all common UL styles
Request for a quoteMAXON MOTOR AG
Switzerland
ESCON The user-friendly servo controller program by maxon motor. The ESCON servo controllers are small, powerful 4-quadrant PWM servo controllers for the highly efficient control of permanent magnet-activated DC brushed and brushless motors. The featured operating modes – speed control (closed loop), speed control (open loop), and current control – meet the highest requirements. The ESCON servo controllers are designed to be commanded by an analogue set value. They have a wide range of functionalities with digital and analogue inputs and outputs and are configured over the USB interface using the graphic user interface "ESCON Studio" for Windows PCs. Compare ESCON models. ESCON Feature Chart See the Feature Chart for a quick overview of the entire ESCON range of products and to compare the different models. ESCON Setup (complete version) Installation includes: ESCON Studio 2.2 (graphical user interface) ESCON firmware 0x0150 Documentation (ESCON Feature Chart, ESCON Setup «Release Notes», Firmware Version «Readme», Hardware Reference)Compact, powerful 4-quadrant PMW servo controllers with analog command signals. Easy to configure.
Request for a quoteMAXON MOTOR AG
Switzerland
EPOS Positioning made easy. EPOS is a modular, digital positioning controller by maxon motor. It is ideal for permanent-magnet activated brushed DC and brushless DC motors with incremental encoders and an operating range of 1 to 700 W. The wide range of operating modes combined with various command interfaces allow for versatile use in a wide range of drive systems in the fields of automation and mechatronics. EPOS2 See the «Feature Chart» for a quick overview of the entire EPOS2 product range and to compare the different models. EPOS3 EPOS2, EPOS2 P, EPOS3 and MCD Setup (complete version) The installation includes: EPOS Studio 2.1 (graphical user interface) EPOS2 firmware 0x2126 EPOS2 P firmware 0x0205 EPOS3 firmware 0x2211 Open PCS2008 programming environment for EPOS P Documentation (Feature Chart, Release Notes, Getting Started, Cable Starting Set, Hardware Reference, Communication Guide, Firmware Specification, Programming Reference, Supervisory Control Reference, and Application Notes)EPOS (Easy Positioning System) with CANopen or EtherCAT interface and Interpolated Position Mode.
Request for a quoteMAXON MOTOR AG
Switzerland
Staying in control has never been easier. Intelligent dc motor control electronics. All current, speed and position controllers are specially designed for brushed DC and brushless DC motors up to 700 W. CANopen or EtherCAT allow for easy integration of your network. The ESCON 4-Q servo controllers provide power and highly precise speed control for maxon brushed DC and brushless DC (maxon EC) motors , in a compact design. For simple speed control applications of brushless DC motors, we offer 1-Q servo amplifiers with a modular design available. All amplifiers feature a variety of useful additional functions. When more than just speed and torque control is required and recurring positioning processes with complex trajectories have to be executed use maxon positioning controllers. With the EPOS2 and EPOS3 (Easy Positioning System) controllers, a modular product line is available for DC brushed and brushless motors. The newest addition to the high-performance range of positioning controllers are the MAXPOS controllers. Current and speed controllers: DEC Module: 1-quadrant brushless DC (maxon EC) motor amplifier for speed control ESCON: 4-quadrant servo controller for current and speed control Positioning controllers: EPOS2: Easy Positioning System with CANopen interface and Interpolated Position Mode EPOS2 P: The programmable positioning controller with CANopen interface EPOS3: Easy Positioning System with EtherCAT interface and CoE (CAN application layer over EtherCAT) MAXPOS: High-performance positioning controller with EtherCAT interface and CoE (CAN application layer over EtherCAT)Cost-effective, Easy speed-control with Hall sensors up to 250 W.
Request for a quoteMAXON MOTOR AG
Switzerland
MAXPOS The high-performance positioning motor controller by maxon motor. MAXPOS 50/5 receives movement and I/O commands from a superior EtherCAT master, which carries out the process control. The extremely fast controllers and the diverse feedback options available provide the ideal conditions for the operation of permanent-magnet activated brushed and brushless DC motors in high-performance applications. Raising the bar for precision and synchronisation. MAXPOS 50/5 supports CoE (CAN application layer over EtherCAT). MAXPOS features The Feature Chart provides a quick overview of the most important features: MAXPOS integration MAXPOS Communication Guide provides hints for integration of MAXPOS into several EtherCAT master systems and further application support topics: MAXPOS 50/5 Part number 447293 For brushed DC motors with encoders and brushless DC (maxon EC) motors with Hall sensors and encoders up to 250 W. MAXPOS Setup (complete version) Installation includes: MAXPOS Studio 1.3 (graphical user interface) MAXPOS firmware 0x0121 Documentation (MAXPOS Feature Chart, MAXPOS Setup «Release Notes», Firmware Version of «Readme», Hardware Reference, MAXPOS Application Notes Collection, Firmware Specification, and Application Notes)EtherCAT interface, fast controllers, and diverse feedback options for the operation of brushed DC or brushless DC (maxon EC) motors.
Request for a quoteBÜCHI AG
Switzerland
The temperature of jacketed reactors can be controlled by TCUs (temperature control unit) large central heating/cooling units with secondary systems for individual reactor temperature control process steam (in case of large metal reactors) Our jacketed reactors are typically temperature controlled using heat transfer oil and TCU or central heating/cooling units. The heat transfer oil which is pumped through the jacket of the reactor controls the process temperature inside the reactor. The temperature range of the heat transfer oil spans from -80°C up to 300°C (depending on the heat transfer oil used).
Request for a quoteVELTRU AG
Switzerland
PLC programming technologies are widely used for development of control circuits in the packaging and assembly machinery industry. VELTRU therefore focuses their development on current PLC technology. Time critical and motion related functionalities, such as path planning, motion interpolation, and robot coordinate transformations for all VELTRU and custom robot kinematics are realized strictly in IEC 61131-3. This widely applied and used programming standard provides several benefits: • One single programming tool for all automation issues including robotics • Powerful and well-known tools for the application development • Integrated visualization modules for the developer and for the end user
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteKRELUS AG
Switzerland
KRELUS also supplies the electrical and electronic controls with temperature controlling, always according to customers requirements.
Request for a quoteELECTRONICS-LIS
Switzerland
The IMCU is a DSP-based controller suitable for a large spectrum of control applications. Its modular design includes: * common for all applications main board (MAIN), * designed for each specific application mezzanine (MEZZ) for as example sensor interface * range of power amplifier(s) (PA) (power linear, Brushless, step etc.) allows the user to match the IMCS precisely to the requirements of each motion control project. Once programmed with suitable and open source firmware, it combines in a single unit all the functions necessary to control one actuator(s). The IMCU is designed around reprogrammable (CPLD and DSP) and reconfigurable technologies allowing it to be tailored exactly to a particular requirement.
Request for a quoteResults for
Controlling - Import exportNumber of results
33 ProductsCountries