Adjustable feet - Import export

"CM 340 universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct, awning, pergolas or other load Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided.

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

CA 400 P - Universal portable electric lift suitable for any vertical lifting for safe work. For the installation of cassette, air conditioning, duct or other load Load capacity 150 kg - Lift height 4 m Lightweight portable device Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V mono electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power failure using the crank provided

Activated in a few seconds on site Very robust compact construction •Invertable fork with adjustable width Two Ø 200 mm wheels for easy transport on site • Base equipped with 2 stabilizing arms • Feet with adjustable height wheels Lifting cable anti-torsion in very high resistance steel Level for perfect control of the position of the feet Lifting winch with automatic brake • Steel pulleys on bearings

Combinable in a variety of ways The base frame SM-1 consists of a lifting column mounted on a table foot with adjustable feet. The lifting column SM is equipped with a table plate support which is used to attach a table top. The base frame SM-2 consists of two lifting columns each of which is mounted on a table foot with adjustable feet. The columns are connected by a crossbar. Each lifting column SM is equipped with a table plate support which is used to attach the table top. - ideal as an office desk or light assembly table The base frame SM-4 consists of four lifting columns arranged in a rectangle and connected by crossbars. The lifting columns are equipped with a foot plate including adjustable rubber feet. The table top is attached directly to the adapter plates of the lifting column SM. - ideal for stable workbenches

Elegant and flexible Our spindle lifting column SQ is also available as a complete table base frame. It consists of four SQ columns which are arranged in a rectangle conected by cross bars. Height adjustable assembly tables, laboratory and mechanical industry workstations can be simply realised with the spindle driven table base frame. The spindle lifting columns SQ have a lifting and pulling force of 1500 N. Therefore a restoring force is not necessary. The table top can be mounted directly to the cross bars. Every synchronous driven table base frame is equipped with adjustable rubber feet, a control box and a manual control switch. More accessories are available in our Online Shop. Accessories

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)

For spindle driven workplaces and tables Set up ergonomic workplaces for diffrent areas with the elegant spindle lifting column SL. It is used for assembly tables, in assembly systems, for mechanical engineering, height adjustable beds and massage tables. The column SL consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each column has an internal motor that drives the threaded spindles. These are driven synchronously by the control unit. The T-slots on 3 sides (width 8 mm) allow the connection of crossbars, shelves, attachments and mountings along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

The lifting column for industrial and assembly tables The lifting column SQ consists of a colorless anodized aluminium profile with a cross-section 45x45 mm. The stainless steel tube is guided in a plastic bushing and is moved by a spindle drive. Up to four lifting columns can be connected to a control box and operated synchronously. There are T-slots on 2 sides of the leg (width 8mm). These allow the mounting of crossbars and attachments along the entire length of the column. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

Slim and compact The leg SM consists of two extruded aluminium profiles with a plain anodised finish, guided by plastic gliders. Each leg has an internal motor that drives the threaded spindles. Up to 3 spindle Lifting legs can be connected to one control box and are operated synchronous. The T-slots on 3 sides (width 8 mm) allow the addition of crossbars, shelves, attachments and mountings along the entire length of the leg. The following accessories are available: Crossbars in various lengths Table feet with adjusting screws Base plates

High loads with small dimension The housing of the linear units SLA and SLG are made out of colorless anodized aluminium profiles with dimensions 35x35 mm (SLA) or 45x45 mm (SLG). Up to 4 linear units can be connected to one control box and are operated synchronous with a hand switch. The systems SLA and SLG are used in applications which need ergonomic height adjustable work surfaces. Especially existing work stations can be retrofitted with linear units. The dimensions 35x35 mm and 45x45 mm fit perfectly in steel profiles 40x40 mm or 50x50 mm, which are often used as carriers and legs for work stations. Compared to to the linear unit SLA, the SLG can withstand higher bending moments and is more stable. We recommend the SLA and SLG linear unit for industry, furniture and catering. The following accessories are available: mounting plates adjustable rubber foots aluminum feet castors tube fitting (only for SLA)