Results for
ESSELATE AB
Sweden
Dimensions: 1200 x 1000 x 145 mm Standards: According to your own specification, IPPC ISPM-15 heat treatment, kiln drying, certified nails Material: Soft and hard woods (e.g. pine, spruce, poplar, alder, beech etc.)
FLÄKTCOMP SWEDEN AB
Sweden
A mixed-flow fan combines the advantages of axial fans with the characteristics of radial fans. Simply described, it is an axial fan with a fan wheel in radial format. This provides a cost-effective design, in duct or box design, with a stable fan curve and relatively high pressure. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit. Mixed-flow fans are usually used as ventilation fans. Typical applications are ventilation solutions in gyms, sports halls, warehouses, commercial kitchens, factories or airport terminals. Depending on requirements, the design of a mixed-flow fan can be completely adapted to the customer’s needs. With the right dimensioning and material selection, a mixed-flow fan will work problem-free for many years.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
The wall fans we offer are direct-driven axial fans that are easily installed in walls or ceilings. The wall fans can be in 1-phase or 3-phase design. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials The fans are usually supplied as a complete unit, but we can also offer new impellers for existing wall fans.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
In tough applications such as e.g. high temperatures or movement of corrosive gases, it is not always possible to mount a motor in the volume flow. The solution for this is the so-called bifurcated fan which is an axial fan where the air flow is divided in a tunnel, which means that the motor is not in the volume stream. It is thereby protected from possible harmful particles or high temperatures. Our many years of experience and large product range give our customers peace of mind. Development, design and manufacture of fans takes place with the highest precision and with the highest quality materials. The fans are usually supplied as a complete unit.
Request for a quoteFLÄKTCOMP SWEDEN AB
Sweden
Radial fans or centrifugal fans are a type of fan that uses centrifugal force to create a pressure increase and a volume flow. This type consists of a fan wheel that rotates in a snail-shaped cover. The flow enters the fan through an inlet placed axially with the fan wheel shaft and motor, and is then thrown out radially with the help of the force from the fan wheel. Unlike axial fans, the motor is not in the volume flow of radial fans. To change the performance and characteristics of centrifugal fans, different designs are used on the fan wheel. The strength of the centrifugal fan is its versatility. A radial fan can be designed to transport a variety of volume flows at a wide range of pressures. At higher flows and relatively low pressures, an axial fan may be a better option. Centrifugal fans are available in single and double suction versions.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SOLLEX AB
Sweden
Titanium coated industrial razor blades adapted for plastic film manufacturing. The coating is optimized for cutting plastics and plastic film with few additives. The thickness of 0,30mm gives a robust blade. For a finer cut, Sollex recommends thinner blades with a titanium coating (1-015-T). Material: Stainless steel Coating: Titanium Packaging: 100 blades packaged in a transparent, industrial box where you can see how many blades remain https://www.sollex.se/en/product/rounded-3-hole-blade-43x22x030mm-titanium-coated
Request for a quoteSOLLEX AB
Sweden
High quality industrial razor blade in stainless steel, especially adapted for plastic film manufacturing. best used for cutting simpler films with few additives. For higher performance and durability, Sollex recommends industrial razor blades with a ceramic coating (2-030-K) or zero friction-coating (2-030-Z). Suitable for: SImpler plastics with few additives Grinding: Double edge Two sided Double bevel Material: Stainless steel Packaging: 100 blades packaged in a transparent, industrial type box that allows the user to see how many blades remain https://www.sollex.se/en/product/straight-3-hole-blade-43x22x030mm-ss
Request for a quoteHEATION AB
Sweden
aquarens is a self-cleaning water jet filter in stainelss steel. Suitable to treat fluids loaded with a medium-high amount of suspended solids, even colloidal. Thanks to its powerful pressurised water jets, the filter can efficiently clean the screen in a short time and with reduced water consumption. The filter is manufactured in two different constructive shapes, Y and L, to adapt to different system layouts.
Request for a quoteHEATION AB
Sweden
air-phin is a self-cleaning suction scanning filter equipped with a motorized adaptive suction pad cleaning system which easily regenerates the filtering element within a few seconds, without interrupting the flow. This filter is ideal to treat water loaded with suspended solids and can be implemented in various industrial applications: process water treatment, HVAC closed circuit systems, fire prevention systems and many more. It is available in 3 different constructive shapes,Y- L and O in order to adapt to different installation layouts. The vessel and cleaning system are completely made of stainless steel supplemented with adaptive and resistant suction pads which make the filter very robust and low maintenance.
Request for a quoteHEATION AB
Sweden
a-swipe is an automatic self-cleaning brush filter with a motorized brush cleaning system which easily regenerates the filtering element within a few seconds, without interrupting the flow. The vessel and cleaning system of the filter are entirely made of stainless steel equipped with Nylon Brushes which makes it very robust and low-maintenance. Automatic brush filters are ideal to treat water loaded with non-colloidal suspended solids and are usually implemented in well-water, canals, rivers and industrial applications. The filter is available in 2 different constructive shapes, Y and L, in order to adapt to different installation layouts.
Request for a quoteHEATION AB
Sweden
m-swipe is a manual brush filter in stainless steel with a manually-operated Brush clening system which allows the operator to easily clean the filtering screen in a matter of seconds without opening the cover. The filter´s vessel and cleaning system are completely made of stainless steel supplemented with Nylon Brushes which makes the filter very robust and low-maintenance. It is ideal to treat water loaded with non-colloidal suspended solids and is usually implemented in irrigation systems, well-water, canals, rivers or industrial applications Available in 2 different constructive shapes, Y and L, in order to adapt to different installation layouts.
Request for a quoteHEATION AB
Sweden
cyclo-phin is a stainless steel cyclone water filter or also called hydrocyclones. Thanks to their design cyclone water filters transform the tangential inlet flow into a whirlpool that separates particles thanks to the centrifugal force pressing them against the body of the filter. They are ideal for the removal of sand or other heavier particles from the water and have a very high removal rate. Typical applications for hydrocyclones are removal of sand from water wells, cooling water taken from rivers or lakes, pre-filtration or protective filtration for downstream equipment.
Request for a quoteHEATION AB
Sweden
optimum is a strainer filter. The housing is manufactured in stainless steel and available in 3 different constructive shapes Y, L and O to adapt to various installation types. The filtering element is a mesh screen. It is the optimal solution to be implemented as a protection filter in closed-circuit plants and more in general in process water applications with a moderately low quantity of suspended solids.
Request for a quoteHEATION AB
Sweden
rock-phin is an inline basket filter. It has a strong perforated metal sheet basket and is manufactured in stainless steel. It is the optimal solution to protect downstream elements in the water pipeline such as pumps or valves. More generally an inline basket filter can be used as a coarse filter in processes that use water from wells, rivers or canals typically full of large suspended solids.
Request for a quoteHEATION AB
Sweden
These impurities are retained by a wide filtering bag which reduces the frequency of required cleaning operations. Thanks to a quick bolt system of eye-bolts the lid can be opened quickly which makes it easier to change the bags. Each bag filter housing is designed to accommodate Neodymium magnetic candles ideal for removing ferrous particles such as magnetite. The magnetic candles are not in direct contact with the water. By removing them the particles will fall off into the bag. This feature makes them extremely easy to clean. The valve installed on the top cover can be used to add chemicals for system cleaning.
Request for a quoteResults for
A industries - Import exportNumber of results
16 ProductsCountries
Company type