Surge protection devices - Import export

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

Surge protectors, also known as SPDs (Surge Protection Devices), are devices that absorbes the voltage variation in place of the installed equipment, thus also drastically reducing the risk of breaking of electrical appliances. Scorpio is a SPD, available in different models (differential or common mode), specific for low voltage and protects against the direct and indirect effects of lightning or other transient overvoltages of a differential type (line - neutral). It must be installed upstream of the electrical or electronic devices. Available in different models Frequency: 50/60 Hz -Fast surge protection -Small size -Protection fuse in series with the line -Can be used as T3 (protect a single device) or T2 (protect multiple devices) -The 10kV models are equipped with a LED indicating correct operation

Colourful, stylish, cool. With surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. Optical function display for overload protection. Shapely and stable enclosure due to polished, highly break-proof polycarbonate. Illuminated 2-pole ON/OFF safety switch. Earthed sockets in a 45° arrangement, ideal for angular plugs. Childproof sockets. With mounting facilities for wall installation. In blister packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Length approx.: 35 cm Socket: 4 Nominal current: 16 A Interference filter: - Colour: Blue Plug-in system: DE

Colourful, stylish, cool. With surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. Optical function display for overload protection. Shapely and stable enclosure due to polished, highly break-proof polycarbonate. Illuminated 2-pole ON/OFF safety switch. Earthed sockets in a 45° arrangement, ideal for angular plugs. Childproof sockets. With mounting facilities for wall installation. In blister packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Length approx.: 35 cm Socket: 4 Nominal current: 16 A Interference filter: - Colour: Green Plug-in system: DE

Extremely sturdy extension socket protects valuable electrical equipment against dangerous surges. Protects expensive devices from overloads with a max. surge current of up to 13.500A. Extremely sturdily constructed extension socket made from highly break-resistant polycarbonate. Special feature: cable output is fitted opposite the switch for easy use, e.g. when placed under a desk. The distance between the sockets allows the use of large charger units. Rubber pads prevent extension socket from slipping. With practical hanging facility. Illuminated 2-pole ON/OFF safety switch. 16 A fuse. Earthed sockets in a 45° arrangement, ideal for angular plugs. Childproof sockets. In blister packaging. Design protected. Cable length: 2,5 m Cable: H05VV-F 3G1,5 Length approx.: 45 cm Socket: 5 Nominal current: 16 A Colour: Silver Plug-in system: DE

Extremely sturdy extension socket protects valuable electrical equipment against dangerous surges. Protects expensive devices from overloads with a max. surge current of up to 13.500A. Extremely sturdily constructed extension socket made from highly break-resistant polycarbonate. Special feature: cable output is fitted opposite the switch for easy use, e.g. when placed under a desk. The distance between the sockets allows the use of large charger units. Rubber pads prevent extension socket from slipping. With practical hanging facility. Illuminated 2-pole ON/OFF safety switch. 16 A fuse. Earthed sockets in a 45° arrangement, ideal for angular plugs. Childproof sockets. In blister packaging. Design protected. Cable length: 2,5 m Cable: H05VV-F 3G1,5 Length approx.: 45 cm Socket: 5 Nominal current: 16 A Colour: Black/Light Grey

With Master-Slave function and surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. With the switching ON/OFF of the device, which is plugged into the master socket, all further appliances in the slave sockets can also be automatically switched ON/OFF. Increased convenience with 1 Master socket (3500 W) and 5 Slave sockets (3500 W). Adjustable threshold for cut-out (approx. 8 to 80 W). Operating indicator for surge and for slave sockets. Illuminated 2-pole ON/OFF safety switch. Childproof sockets in a practical 45° arrangement. Total output 16 A/3500 W. Extra-long 3 m cable. In blister packaging. Design protected. Cable length: 3 m Cable: H05VV-F 3G1,5 Length approx.: 45 cm Socket: 1 Master 5 Slave Nominal current: 16 A Interference filter: - Colour: Anthracite Equipment: -

With Master-Slave function and surge protection. Protects expensive devices from overloads with a max. surge current of up to 19.500 A. With the switching ON/OFF of the device, which is plugged into the master socket, all further appliances in the slave sockets can also be automatically switched ON/OFF. Increased convenience with 1 Master socket (3500 W) and 5 Slave sockets (3500 W). Adjustable threshold for cut-out (approx. 8 to 80 W). Operating indicator for surge and for slave sockets. Illuminated 2-pole ON/OFF safety switch. Childproof sockets in a practical 45° arrangement. Total output 16 A/3500 W. Extra-long 3 m cable. In blister packaging. Design protected. Cable length: 3 m Cable: H05VV-F 3G1,5 Length approx.: 57 cm Socket: 1 Master 5 Slave 2 Permanent Nominal current: 16 A Interference filter: - Equipment: 2 permanent sockets Plug-in system: DE Colour: Anthracite

Product Features: • The Class B series of over-voltage surge protective devices has been developed to protect against partial direct and indirect lighting discharges and is intended to provide protection in zones 0A - 1, per IEC 62305. • Category IEC / EN / VDE: Class I, II / Type 1, 2 / B + C. This range incorporates remote signaling contacts for central monitoring of SPD health. • DVSB275652TNS for TNS single phase networks with separate N and PE conductors. • DVSB400654TNS (65kA) for TNS three phase networks with separate N and PE conductors. • DVSB4001004TNS (100kA) for TNS three phase networks with separate N and PE conductors. • DVSB4001004TT for TT three phase networks, where N to PE galvanic isolation is required.

Product Features: • The Class C series of over-voltage surge protective devices has been developed to protect against the effects of indirect lightning discharges and induced voltages and is intended to provide protection in zones 1 2 per IEC 62305. • Category IEC / EN / VDE: Class II / Type 2 / C. Available with and without remote signaling contacts. • DVSC27545 consists of a high performance varistor block with thermal disconnection device. The plug-in module/base design facilitates replacement of a failed module in situ without the need to remove system wiring. • DVSC275452TNS Series combines two 45kA varistor modules to provide protection for single phase TNS networks. • DVSC275452TT Series combines a 45kA varistor and gas discharge tube to provide protection for TT single phase networks, where N to PE galvanic isolation is required.

Product Features: • The Class C - DC power series - has been designed to meet the unique requirements of protection of DC power systems found in telepower and railway applications. • Category IEC / EN / VDE: Class II / Type 2 / C. Available with and without remote signaling contacts. • DVSC 24/48 provides both common and differential mode protection using high nominal discharge rating for extended operating life under DC conditions. • DVS - A range of DIN rail mounted voltage suppressors with 24V, 48V, 110V and 240V nominal operating voltages.

NSBon-10 is a surge protection device suitable for AC 50/60Hz, rated voltage up to 275V. It protects user's equipment to indirect and direct lightning effect or other transient overvoltage. NSBon-10 surge protector is designed according to IEC 61643-1/GB 18802.1 and can be applied for TNS power supply systems. NSBon-10 is a single DIN-rail mounted module that is easy for installation and maintenance and should be installed close to the protected equipment. NSBon-10 surge protector has a relay output that is shorted until there is no fault and the device is operating properly. The relay is open after internal thermal disconnection device actuation and failure. The device has L,N and PE terminal blocks for wires up to 2,5 sq. mm.

NSBon-11 is a surge protection device suitable for AC 50/60Hz, rated voltage up to 280V. It protects user's equipment to indirect and direct lightning effect or other transient overvoltage. NSBon-11 surge protector is designed according to IEC 61643-1/GB 18802.1 and can be applied for TNS power supply systems. NSBon-11 consists of two pluggable DIN-rail mounted modules that are easy for installation and maintenance and should be installed close to the protected equipment. NSBon-11 surge protector has LED indicator that is on until there is no fault and the device is operating properly. The LED is off after internal thermal disconnection device actuation and failure. The device has L,N and PE terminal blocks for wires up to 2,5 sq. mm.

RJ45 LAN Adapter Ethernet Network Protect Device Arrester Surge Protector Lightning Arrester Shielded Aluminum Alloy Black Function: RJ45 coupler help extend the connection between two Ethernet patch cables, they are compatible with Cat7,Cat6, Cat5e,Cat5 network

The hermetic Transformer Protection Relay MCHD for hermetically sealed, liquid immersed distribution transformers without gaseous cushion in accordance with EN 50216-3. Each Hermetic-protection relay MCHD is individually tested for tightness and proper functioning.