Surface - Import export

Ready-to-use liquid with bactericidal and fungicidal properties (in terms of yeast-like fungi), intended for disinfection of surfaces and technological lines in food industry plants, including surfaces in contact with food; for use in wellness salons, hairdressing and beauty salons, catering establishments, etc. It has a bactericidal and fungicidal effect (in terms of yeast-like fungi) in accordance with the PN-EN 13697:2002 standard. The product is not intended for use in the medical area. Biocidal marketing authorization: 5401/13.

By applying surface treatments on outer ring contact surfaces, it is possible to improve certain mechanical characteristics such as the hardness. By doing this, we can increase wear resistance while decreasing the friction coefficient. With certain treatments it is possible to achieve high resistance to specific chemical agents. The table below shows a small sample of examples of such surface treatments and their resulting technical characteristics.

We offer demulsifiers In guaranteed quality, at stable prices and packed appropriately for transportation. Do you need advice on choosing your product or are you looking for a suitable substitution? Our application and product experts are happy to help! Our experience and deep knowledge in the area of specialty chemicals and ingredients ensures that we are well positioned to effectively support both our customers and our suppliers with product and application expertise. Please contact us for more information!

Discover the world like never before with this incredible 3D Wooden World Map Surface! Its natural green and yellow combination brings a unique beauty and depth to your walls and is perfect for the adventurous spirit.

With SCHOCK powder coating we realize high-performance and visually appealing product surfaces with long-term corrosion protection and individual color design.

Application The RCM is designed for refacing - the landing surface for the cylinder liner on the engine block, - the landing surface for the cylinder head on the cylinder liner - the landing surface for the cylinder liner on the cylinder head. Capacity Refacing diameter range 200 - 720mm Features The RCM is fitted with two motors providing a smooth cutting action. The speed of the motors is infinitely variable so that the cutting speed can be adapted to the diameter and material of the landing surface. A separate power supply unit is provided for ease of operation. A small hand-held remote control is supplied so that the operator can conveniently switch on and off the machine while watching the refacing operation. The remote control includes an emergency stop to stop the machine in case of emergency. The RCM is centered by a pilot tailored to the specific engine component to be serviced.

Application The VD4HD-RC is designed for refacing • the landing surface for the cylinder liner on the engine block, • the landing surface for the cylinder head on the cylinder liner and • the landing surface for the cylinder liner on the cylinder head. Features Drive unit and gear head of the VD4HD-RC are identical with the drive unit and gear head of the VD4HD Valve Seat Refacing Machine. If you have already a VD4E machine and you want to use it with our new face turning heads, we can convert it into the new high performance VD4HD System. The three available face turning heads should be used according to our recommendation with the VD4HD drive unit and the related power supply type 4HD. We would be glad to advise you about our new VD4HD system and send you an offer for this. The D4/0° adapter head is bolted to the gear head in place of the valve seat refacing head. The VD4HD-RC is centered by a pilot assembly which is designed to fit to the engine component to be serviced.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

BEULCO Clean is a disinfectant based on natural ingredients. It is non-toxic and degrades 100%. It is produced by a special process (ECA process) without the use of additives. This enables the wide range of applications of the active ingredient. BEULCO Clean is even used in other areas for the disinfection of drinking water systems and for drinking water disinfection. The solution differs from conventional active ingredients of this type because only a very short reaction time is required and the agent is quickly broken down again. Application: Ready-to-use spray solution for surface disinfection. Bactericidal, fungicidal, effective against enveloped viruses such as influenza or corona. Clean surface thoroughly before disinfection. Wet surfaces completely. Allow to act for 5 minutes; in case of contamination with fungi, allow to act for 15 minutes. Wipe with a clean cloth. Repeat if necessary.

galvanization electropolishing Zinc nickel coating Manganese phosphate coating chromate and hard chromate coating Cataphoresis coating Powder coating in various RAL colors and more

Surface treatment is called surface treatment to prepare the surface for the final results of the metals with the help of chemicals determined according to the second treatment

Depending on the customers’ orders, the crystals are being ground on the outside diameter of a diamond peripheral sawing disk. We have got three centre grinders with a total monthly capacity 2000 kg. Maximum ground diameter – Ф200 mm. Accuracy 0.03 mm. Surface roughness - Ra ˂ 0.25.

The new generation of fabric backing After the carpet raw material has been tufted and dyed in the colour desired by the customer, the tennis floor is given the necessary nap binding and stability by the back coating. With the classic latex coating, the yarn binding and the coating with a textile secondary backing (action back) are achieved using a highly chalk-filled latex dispersion. This makes the carpet relatively heavy and stiff. With this coating technology, the elasticity only comes from the yarn layer, which is also the wear layer. This means that tennis floors with a classic woven backing become harder year after year, particularly in the main running areas that are subject to the most wear. There is no sustainable elastic layer.

Tyrolit leads in grinding wheels for surface and creep feed grinding, especially in highly porous wheels. Our products' high porosity and low hardness ensure maximum cutting ability and removal rates, even on hard materials. This market leadership is due to the intelligent design of our grinding wheels, tailored to material and workpiece geometry for tight tolerances and perfect surface finish. Grain type, grit size, grade, bond, and structure are adjusted for maximum precision and efficiency. Tyrolit offers a broad range of highly efficient grinding wheels for surface and creep feed grinding, ideal for the turbine industry. Our highly porous, vitrified-bonded abrasives guarantee long tool life, cool grinding, and increased profile retention. Electroplated wheels, primarily used in the turbine industry, provide excellent profile accuracy and maximum process stability, resulting in precise grinding results and lower component costs.

Use our industrial manufacturing expertise for your products too Electroplated surface finishing The maximum goods window for galvanising, chromeplating and nickelplating is L / W / D 2800x450x1000 mm. Chrome and nickel plating Galvanising (galvanising without passivation; blue galvanising with variable layer thickness and blue passivation; thicklayer passivation with nanosealing) Electrostatic powder coating Maximum load per hook 30 kg workpieces up to 60 kg Maximum workpiece size L / W / H = 3000/800 /1700 mm More information available at https//www.geck.de

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

High UV irradiance combined with a uniform irradiated area is the key feature of the surface LED series SFL-UV. The SFL-UV modules are water-cooled high-power UV LED sources with an intelligent LED driver. The absence of ineffective infrared radiation reduces the heat compared to conventional UV lamps. Three standard sizes are available with light-emitting areas of 100 x 100 mm to 200 x 200 mm. Customized sizes are available on request. Independent of size, we offer two versions. The HO versions reach high irradiance of up to 5500 mW/cm², while the ECO versions still offer up to 2000 mW/cm². Both irradiances are measured at a distance of 10 mm to the emitting window. The high irradiance allows extremely short processing times. Wavelengths of 365, 385, 395, 405, and 450 nm are available for many different applications.

At given need our experts can invoke extensive subcontracting. Constructions can be: shot blasted and painted wet; galvanized in various ways;