Sulphuric acid - Import export

Sulphuric acid is a colorless and oily liquid with the chemical formula H2SO4. It is a strong acid, which is very important in industry. It is water soluble and the most used product in the chemical industry. Battery acid is also known as zac oil or zac acid. In its pure state, its density at 25 degrees is 1.834. It freezes at 10.5 degrees and boils at 315-318 degrees. When mixed with water, a high temperature is released. Acid should be added to the water instead of adding the water to the acid when mixing with water, as it can cause dangerous splashes. Since it is dangerous to human health, all necessary precautions should be taken and intervened in case of skin contact. Since the interventions for acids are different, the skin to be applied for sulfuric acid should be immediately dried and washed with water. Initially, it should not be attempted to wash with water.

Sulfuric acid, sulfuric also spelled sulphuric (H2SO4), also called oil of vitriol, or hydrogen sulfate, dense, colourless, oily, corrosive liquid; one of the most important of all chemicals, prepared industrially by the reaction of water with sulfur trioxide , which in turn is made by chemical combination of sulfur dioxide and oxygen either by the contact process or the chamber process. In various concentrations the acid is used in the manufacture of fertilizers, pigments, dyes, drugs, explosives, detergents, and inorganic salts and acids, as well as in petroleum refining and metallurgical processes. In one of its most familiar applications, sulfuric acid serves as the electrolyte in lead–acid storage batteries.

The Pump Set is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

The Drum pump is suitable for corrosive, aqueous to slightly viscous media. Perfectly suited for withdrawing or decanting concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant PTFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable

Grease lubrication of friction and rolling bearings in the high-temperature range up to 300°C Lubrication of tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in continuous furnaces, etc. Use at bearing points under influence of chemicals Lubrication of bearings under influence of fuel Advantages and benefits Absolutely resistant to water and steam Resistant to solvents, for example benzene, benzol, acetone, trichloroethylene and against inorganic acids, for example sulphuric acid, hydrochloric acid and nitric acid as well as stearic acids, alcohols and halogens Broad range of applications above the temperature limits of other lubricating greases Excellent wear protection Reduced maintenance and lubricant costs due to possible lifetime lubrication Excellent plastic and elastomer compatibility

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. * Media examples: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. * Pump tube equipped with Lutz original hand wheel Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for withdrawing or transferring concentrated acids and alkalis. * Examples of media: Chloric acid, chromic acid, sulphuric acid, nitric acid, hydrofluoric acid and sodium hypochlorite etc. *Pump tube equipped with Lutz original handwheel *1 battery charge = 12.6 x 200 liter container in 14 min* * determined with pumping unit PP 41-L DL at full speed Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Seal modules of the seal-less (DL) pump are exchangeable * long service life

Extreme-temperature grease on the basis of perfluorinated polyether oils (PFPE) for use in food processing technology at maximum loads and temperatures. Grease lubrication of friction and rolling bearings in the high-temperature range Application, for example at tunnel kiln cars, baking, burn-in and drying furnaces, hot gas units, reaction vessels, boiler plants, roller and conveyor rollers in continuous furnaces, etc. Use at bearing points under influence of chemicals/fuel Advantages and benefits Maximum water and steam resistance Extraordinary resistance to chemicals, for example to solvents, for example benzene, benzol, acetone, trichloroethylene and against inorganic acids, such as sulphuric acid, hydrochloric acid and nitric acid as well as stearic acids, alcohols and halogens Excellent plastic and elastomer compatibility For long-term lubrication of lubrication points subjected to high pressure up to 300°C

For sliding properties improvement of machine parts, apparates and precision machinery, especially for microfinished surfaces For incorporation in plastics, sealings, packages, sintered metals and improvement of sliding properties For long-term or possibly lifetime-lubrication Advantages and benefits Reduces friction and wear in a wide temperature range High effectiveness due to high affinity of MoS₂ to metals Low friction at highest load capacities Low consumption based on forming of extreme thin sliding films Not electrically conducting and not magnetic Chemically stable except against halogenated gases, concentrated sulphuric- and nitric acid For best adhesion, clean sliding surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. Spray on evenly thin from 15-20 cm distance to the sliding surfaces.

In open air, resistant to fresh and salty water, sulphuric, sulfurous, phosphoric and chromic acids. Affected by acetic formic and nitric acids.

Chemical appearance: Linear AlkylbenzeneSulphonic Acid is a sticky, highly viscous brown liquid. This highly dense liquid does not have a pungent smell. In temperatures lower than 10 degree Celsius, the chemical solidifies. Chemical application and strengths: LABSA is an anionic surfactant. Its molecules have both hydrophobic and hydrophilic group. This compound is created from a sulfonation process where chlorosulfonic acid, sulphuric acid, diluted sulphur trioxide and sulfamic acid. The long length of the alkyl chain makes it able to form different formulations when mixed with other salts. Sulphonic acid is a low-volume synthetic surfactant that is available at a low cost. It is used for the production of various emulsifiers and detergents for use in households, dishwashing and as well as mercerizing and cleaning agents in the textile industry. The increased use of LABSA increases the surface area of distempers. This is why it is used as a wetting agent and an emulsifier.

Sulfur is one of the most important agricultural and industrial raw materials and is considered a strategic product. Sulfur is an odourless, tasteless and polyvalent nonmetal which is mostly in the form of yellow crystals and is obtained from sulphide and sulphate. Sulphur occurs naturally in the environment and is the thirteenth most abundant element in the earth’s crust. It can be mined in its elemental form, although this method has declined over the last decade to less than 2% of world production. Today most elemental sulphur is obtained as a co-product recovered from oil and gas production in sweetening process. Despite this, our company can offer both, sulfur obtained as a by-product, and sulfur mined in its elemental form. Depending on the needs of the client, we sell it in liquid or granular form, or in the form of a lump. Sulphur is the primary source in the production of sulphuric acid, the world’s most widely used chemical.

Stainless steel metering gear pump for the delivery of chemical raw materials for the production of pharmaceutical products. CHEM metering pumps are also used to pump isocyanate, sulphuric acid, polyol or essential oils. With the appropriate combination of materials, many critical applications can be realized and a variety of low-viscosity fluids can be pumped. The range of applications extends from classic transfer and metering tasks in the chemical and pharmaceutical industry to the pumping of monomers, oligomers and prepolymers in polymer production. These chemical pumps are suitable for even the most difficult tasks and impress with their reliability and dosing accuracy in both vacuum and high-pressure applications. Typical applications for this pump type are in the chemical, cosmetics, food, petrochemical and polymer industries

HI AIR KOREA is a well known marine equipment manufacturer, a leading HVAC Package supplier and specialist in manufacturing air handling units (AHU), Exhaust Gas Cleaning Systems (EGCS), chilled water plants, and all products used for Air-conditioning and Ventilation system. The headquarters is located in Gimhae, South Korea, with two more manufacturing plants in the area.

Ball valve for desalination, offshore oil and gas industry, pulp and paper and chemical industry. Suitable for reverse osmosis, geothermal water, Sulphuric acid, Nitric acid, Saliferous fluids, hydroxides and other liquids and gases without mechanical impurities.

Professional liquid pipe unblocker. Rapidly eliminates impurities and residues in tubes and drains. High sulphuric acid content, 98%. Complies with REACH requirements. Registered exposure limit (for use as a pipe unblocker).

Recovery of acids and acidic rinse waters Additionally to the pickling bath treatment by microfiltration and ultrafiltration, the recovery of acid becomes more and more important. Additionally to sulphuric and hydrochloric acid, also mixed acids (HF / HNO3) can be recovered. The first step of the acid recovery is mostly a sludge separation by microfiltration. Downstream, diffusion dialysis, electrodialysis or nanofiltration is used for metal separation. For the treatment of rinse waters, OSMO Membrane Systems GmbH offers reverse osmosis or electrodialysis plants.

Forced draft cooling towers are specially designed to handle zinc sulphate solutions or highly corrosive liquids. They are equipped with distribution in highly resistant material.EFFECTIVE DESIGN COMBINING performance easy access for easy maintenance - sprayers are accessible without scaffolding and removable minimization of drift losses: 0,001% and lower. SUITABLE FOR HIGHLY CORROSIVE LIQUID WITH 200gl/ sulphuric acid, Presence of fluorine, Crystallization of gypsum

PEEK (Polyetheretherketon) has a very good resistance to acids, alkalis and solvents excluding excluding sulphuric acid. Additionally PEEK has a very good mechanical stability and is temperature-resistant in the range from -65°C to 250°C

PEEK (Polyetheretherketon) has a very good resistance to acids, alkalis and solvents excluding excluding sulphuric acid. Additionally PEEK has a very good mechanical stability and is temperature-resistant in the range from -65°C to 250°C

These packages are tailored to suit our clients’ requirements while adhering to European Standards, Ciria and HSE guidance. We engineer solutions to integrate into existing or new sites and can also provide packaged, standalone systems which are largely independent of the main plant. We provide solutions for chemicals such as sodium hydroxide, sulphuric acid, hydrochloric acid, ferric sulphate, aluminium sulphate, ferric chloride, antifoam, ortho-phosphoric acid, etc. Storage capacity, duty/standby configurations, materials of construction, etc. are tailored to the application, to provide adequate storage and ensure that the system can be operated and maintained safely. The chemical storage and dosing systems are fully fitted with instrumentation such as level controls, leak detection, flowmeters, etc. and are generally PLC controlled with an operator interface panel or PC used to allow the operator to view the plant operation and change parameters.