Results for
TROTEC GMBH
Germany
With the powerful 750 W submerged pump TWP 7506 E, even large quantities of water can be transported in a very short time. The powerful high-performance pump with near-ground suction is recommended for universal use in the house, garden and business to pump out or recirculate slightly contaminated clear water (dirt particles sized max. 5 mm) in indoor and outdoor pools, whirlpools, garden wells, rain barrels, cisterns and rainwater retention basins. Moreover, the submerged clear water pressure pump can be used to dry out basements and living spaces flooded by washing machine leaks, heavy rainfall or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of 5 mm. When used in waterproofing of buildings, the TWP 7506 E pump, which is protected against the ingress of water by IPX8 type of protection, impresses as a low-maintenance and durable drainage pump for pumping accumulated rainwater or groundwater out of the drainage shaft in a controlled way.
Request for a quoteTROTEC GMBH
Germany
TWP 11025 E – Trotec's powerful submerged waste water pump accomplishes virtually any task with flying colours. Making use of 1,100 watts the pump reliably pumps up to 15,000 litres per hour of clean or contaminated water containing dirt particles sized up to 25 millimetres from a delivery head of up to 11 metres. Hence, it is equally suitable for use in garden ponds, drainage shafts or cisterns as it is for the quick draining of rooms affected by a flood or heavy rainfall. Withdrawing water from lakes, rivers and swimming pools can achieved without difficulty. A water level of 7 metres is reduced to merely 35 mm before you know it The robust and compact submerged pump is accommodated in a watertight encapsulated and impact-resistant plastic housing and therefore optimally prepared for underwater application at an immersion depth of up to 7 metres.
Request for a quoteTROTEC GMBH
Germany
Impressive 400 watts of power for pumping up to 7,000 litres per hourThe compact submerged clear water pump TWP 4005 E wows homeowners and passionate amateur gardeners alike with its high capacity and the user-friendly handling characteristics. The maximum feed rate of 7,000 litres per hour recommends the TWP 4005 E as much as the extraordinary pump height of 7.5 metres. An integrated check valve prevents the return flow upon switch-off. With its powerful and maintenance-free 400 W motor the submerged clear water pump TWP 4005 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. The submerged pump drains flooded basements and laundry facilities at a remarkable speed. It can be used to empty swimming pools in a trice and further leaves a good impression when pumping over the water in cisterns and rain barrels that are full to the brim.
Request for a quoteTROTEC GMBH
Germany
Our hero made of stainless steel for self-pumped waterNone of our high-quality submerged waste water pumps of the TWP series transports more water per hour. With its resistant pump housing, the submerged pump TWP 11000 ES made of stainless steel withstands even the most extreme weather conditions. The solid submerged pump guarantees an above-average and at the same time maintenance-free service life for water withdrawal from ponds, garden wells, cisterns or rain barrels as well as for pumping out and recirculating water in swimming pools and whirlpools, flooded basements, garages and building/drainage pits. This high degree of versatility makes the TWP 11000 ES an indispensable universal helper for passionate hobby gardeners, facility managers, homeowners or craftsmen.
Request for a quoteTROTEC GMBH
Germany
With 400 watts of power, the submerged pump TWP 4006 E moves the masses. Being a flexible helper in the home, garden and business, the universally applicable submerged clear water pump with its high flow rate is suitable for recirculating and pumping only slightly contaminated clear water (with dirt particles sized up to 5 mm) out of swimming pools, wells, rain barrels, cisterns or rainwater tanks. Similarly, the submerged pressure pump TWP 4006 E with near-ground suction can be used to dry out basements and washrooms that have been flooded due to heavy rainfall, washing machine leaks or the ingress of groundwater, leaving "wipe-dry" results and a low residual water level of only 5 mm. When used as a drainage pump in a drainage shaft, the robust pump, which is protected against the ingress of water by IPX8 type of protection, ensures that the accumulated rainwater is pumped out in a controlled manner.
Request for a quoteTROTEC GMBH
Germany
The submerged pump TWP 7505 E impresses with its high performance and easy handling. That makes it an equally attractive purchase object for home owners needing a tool for the quick and efficient elimination of a leakage in interior spaces as it does for professional and amateur gardeners wanting to pump over irrigation water from wells, rain barrels and tanks outside. It is ideally suited for use to a delivery head of 10 metres. The maximum flow rate amounts to remarkable 13,000 l/h. With its powerful and maintenance-free 750 W motor the clear water pump TWP 7505 E conveys clear or only slightly contaminated water with particle sizes of up to 5 millimetres. Owing to the high conveying capacity the submerged pump drains flooded basements and laundry facilities before you know it, pumps dry entire swimming pools at a remarkable speed and ensures the quick pumping over of water in cisterns and rain barrels that are full to the brim.
Request for a quoteTROTEC GMBH
Germany
Trotec's most powerful submerged clear water pump TWP 9005 E pumps off up to 14,000 litres of clear to slightly contaminated water per hour. This makes it the perfect partner if you suddenly need to pump large amounts of water off or over quickly and efficiently. It is excellently suited for draining water from pools, for the quick elimination of leakages caused by a defective washing machine or of ground water ingress in basement rooms as well as of water that has penetrated the walls owing to a flood or heavy rainfall. Another possible application would be when work is required in drainage shafts. The maximum delivery head of the TWP 9005 E can amount up to 11.5 metres. An integrated check valve prevents the water from flowing back after switch-off and so reduces the time to restart suction. With its high-performance and maintenance-free 900 W motor the TWP 9005 E pumps off even slightly contaminated water with particle sizes of up to 5 millimetres.
Request for a quoteTROTEC GMBH
Germany
The submerged waste water pump TWP 7025 E is a compact power pack mastering virtually every task brilliantly. With a power consumption of 750 W the high-suction pump transports up to 13,000 litres of contaminated water per hour. Due to this enormous conveying capacity of the TWP 7025 E, flooded basements and living spaces are quickly rendered accessible again, and pumping water out of building and waste water pits as well as withdrawing water from lakes, rivers and ponds can be done easily and without any problems. Even the water volumes of larger ponds or swimming pools can be circulated or disposed of quickly and easily. This power pack pumps water containing dirt particles sized up to 25 millimetres up to a pump height of 9 metres reliably and smoothly. This way it is able to transport water from a flooded basement to the next higher floor and thus out of the house.
Request for a quoteTROTEC GMBH
Germany
Contaminated water in the house, garden or well should be pumped off as quickly and as effectively as possible – the thoroughly robust and powerful submerged waste water pump TWP 4025 E is perfectly suited for this purpose. It meets every challenge and transports water containing dirt particles sized up to 25 millimetres. The submerged waste water pump TWP 4025 E reliably transports up to 7,500 litres of contaminated water per hour up to a pump height of 5 metres with a power consumption of 400 W. Flooded basements and living spaces are quickly rendered accessible again, and building or waste water pits can be emptied just as effectively as ponds, tanks or cisterns. Thanks to the pump's high conveying capacity, water can be quickly and easily withdrawn from lakes, ponds or rivers for lawn sprinklers or complex irrigation systems. Naturally, the submerged pump TWP 4025 E is also suited for transporting clear water.
Request for a quoteTROTEC GMBH
Germany
Brilliant prospects for self-pumped waterBeing made of stainless steel, the submerged waste water pump TWP 9000 ES is extremely resistant to extreme weather conditions and corrosion. The equally high-quality and robust material of the pump housing guarantees a long, low-maintenance service life for withdrawing water from garden ponds, wells, cisterns or rain barrels as well as for pumping out and recirculating water in swimming pools, flooded basements, garages and building pits. TWP 9000 ES: powerful helper for house, garden and business Due to its solid construction and the safe IPX8 type of protection, the submerged pump reliably withstands even the toughest working conditions in continuous operation.
Request for a quoteTROTEC GMBH
Germany
Summer, sun and sunshine? After days of heat, the warmest time of the year is increasingly showing its dark side. Lawns in the garden burn and plants die of thirst if they are not watered with vast quantities of water. Blessed is the one who has a TWP 4036 E submerged waste water pump and can pump free service water from the garden pond or a cistern. But not only gardens are the ideal working environment for the powerful submerged pump. It is not uncommon for continuous rain and storms to lead to flooded streets, flooded garages and a rising water level in the basement. With the robust pump TWP 4036 E, which is protected against the ingress of water by IPX8 type of protection, you can also remove these dirty water masses (with dirt particles sized up to 25 mm) in the shortest possible time.
Request for a quoteTROTEC GMBH
Germany
As wonderful as the summer with its warm temperatures may be, it also has a dark side. If it is permanently too hot, the lovingly tended garden plants will die of thirst and the formerly green lawn will burn in the blazing heat unless it is watered for several hours every day. The submerged waste water pump TWP 7536 E provides a remedy here, for it enables you to pump freely available service water (with dirt particles sized up to 25 mm) from the garden pond, a stream or a rainwater cistern for watering your garden. Conversely, the submerged pump also helps when it rains too much. Continuous rainfall and storms in summer are a frequent cause of flooded streets, water flooding in the garage and cellars full of waste water. Blessed is one who is prepared for such capricious weather conditions. With the robust pump TWP 7536 E, which is protected against the ingress of water by IPX8 type of protection, you can dry out even heavily flooded basements and garages in the shortest possible time
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pum
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
High corrosion resistance Hydraulic sleeve, discharge head, motor grouping support and power cable guard in high quality stainless steel Oscillating impellers adjustable for axial movement that prevent them from blocking Diffusers and turbines in noryl They do not require any kind of maintenance Maximum fluid temperature 30°C Immersion limit 150 m Maximum number of starts per hour: 20. Note: Although Termar electric pumps include non-return valves, it is advisable to install 1 additional valve at the outlet of the electric pump.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
DRAGFLOW SRL
Italy
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system Electric pumps are available in 50Hz and 60Hz versions.
Request for a quoteDRAGFLOW SRL
Italy
Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Possibility of installation on mechanical arm Dredging systems (side excavators or dredging head) available on request Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system
Request for a quoteWITTE PUMPS & TECHNOLOGY GMBH
Germany
Chemical pumps of the CHEM series are used as a modified version as submersible pumps for emptying drums and containers. For example, chemicals such as liquid sulphur are pumped at temperatures up to 150 °C. The series is well suited to transfer low-viscosity media at relatively high pressures. — For viscosities up to 1.000.000 mPas — Temperatures up to 500 °C as special version — Differential pressures up to 120 bar — Suction pressures from vacuum to 15 bar Submersible suspension pumps are designed in such a way that the pumps are submerged in the container with the medium and the medium is sucked in via the flangeless suction side. The medium then enters the process from the tank via a pipe from the discharge side. Submersible suspension pumps are often made of special or stainless steels. A special feature of these pumps, as a rule no additional seals are required on the pump. Only the tank is sealed towards the atmosphere.
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The STL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 200 l/min Delivery head: up to 80 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Quick suctioning immersion pumps equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. Volumetric delivery up to 280 l/min Delivery head up to 8,5 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Plastic immersion pumps series KTF and KTB are suitable for various water supply problems. These pumps are also suitable for a wide range of chemical liquids. No shaft seal is required, due to the construction. Impellers: semi-open Fluids: industrial water; warm, cold, with and without chemical admixtures, distilled, deionized Volumetric delivery: up to 400 l/min Delivery head: up to 42 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Immersion Pumps Models TS12 to TS24 are suitable for CNC machine tools featuring coolant supply through the tool holder or driving spindle or equipped with internally cooled tool. These pumps are equipped with a peripheral impeller to achieve a compact high pressure unit. Series TS are suitable for filtered coolant only. To reduce pump pressure, models TS22 to TS24 are also available with an optional Y/YY (Dahlander) motor configuration for 4 pole operation at half speed. Volumetric delivery: up to 70 l/min Delivery head: up to 95 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Quick suctioning immersion pumps series SFL equipped with the patented "BRINKMANN's Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions) with heavy chip loads as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SFL serie offers a flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2500 l/min Delivery head: up to 46 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Immersion pumps series TH and FH use closed impellers in order to minimize power consumption and to optimize hydraulic pump efficiencies.In addition, the TH series offers high pressures at short immersion depths. Inline pumps of the series FH can be used as boostingpumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. In such a setup, pumps of the series FH can raise the incoming pressure by up to 26 bar. Extended length is possible. See mechanical/hydraulic features within the technical information section. Volumetric delivery: up to 640 l/min Delivery head: up to 520 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Immersion Pumps Our multistage pump models TC25...TC460 have been especially developed to supply internally cooled tools with coolant fluid. Closed impellers provide optimal hydraulic efficiencies while minimizing power consumption. A frequency converter can be supplied for special applications or for matching the pump characteristic to a specific duty point. See page "Control/Regulation" in the Technical Information Volumetric delivery: up to 600 l/min Delivery head: up to 225 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Immersion Pumps are plain centrifugal pumps with the impeller fitted on the driving shaft extension. They are mounted on top of the container, the pump extension being immersed in the coolant. The dimensions are based on standard specification EN 12157. The maximum coolant level must stay a few mm/inches below the mounting flange. Volumetric delivery: up to 500 l/min Delivery head: up to 13 m Please contact us for delivery quantity
Request for a quoteBRINKMANN PUMPS K.H. BRINKMANN GMBH & CO. KG
Germany
Quick suctioning immersion pumps equipped with the patented "BRINKMANN`s Suction De-aeration System" are excellently suited to pumping extremely inflated fluids (emulsions resp. cooling/cutting oils) as they occur in heavy cutting when turning, milling or grinding. The quick suctioning immersion pumps reach stable working conditions as soon as the liquid level reaches the suction inlet. The SAL serie offers a (SAE) flange with pressure gauge connection port. The flange can be rotated for either horizontal or vertical pipe connections. Volumetric delivery: up to 2600 l/min Delivery head: up to 115 m Please contact us for delivery quantity
Request for a quoteResults for
Submersible pumps - Import exportNumber of results
93 ProductsCountries
Company type