Treatment - Import export

Crème Hydratante is a moisturizing day cream with shea butter, avocado oil and moisturizing elements. An intensive treatment for normal skin tending to dryness.

EYE TREATMENT SOLUTION visibly soften fine lines, minimize under eye circles and revive an energized look. Meet the next generation of eye treatment solutions with ingredients proven to tackle wrinkles, firmness, under-eye shadows and puffiness, while delivering lasting hydration

Zenix Cosmetics Professional Hair Treatment Care Repairs the hair worn out from hair dye and chemicals. It gives the hair a bright and full appearance instead of electrification and lifeless appearance. It helps the hair to be repaired by regaining lost keratin of hair. Hair btx process is an application that can be easily applied by professional hairdressers and conscious individual users. USAGE: Wash your hair twice with Zenix Pro keratin Purifying Shampoo. Dry the hair with help of towel while keeping the hair moisturized. . Applay the Keratin cream on the hair with the help of a fine-toothed comb. After applying it to all of the hair wait 45 minutes. Rinse the hair with warm water and apply a blow dryer to heat the hair only.

MONOETHYLENE GLYCOL (MEG) MEG Purity 99.8 % wt. min Color [Pt-co ] 5 max DEG 0.08 % wt. max Water 0.08 % wt. max Specific gravity (20/20 ◦C) 1.1151-1.1156 Boiling range at 0.1013 MPA 5% Vol. Min 196 ◦C 95% Vol. Max 199 ◦C Pyhsical Spec: Transparent Liquid, colorless Introduction Monoethylene glycol (MEG) is an odorless, colorless, clear and viscose liquid with a sweet taste, which is produced from the reaction between water and ethylene oxide. It is miscible with water, alcohols, and many organic compounds, and has the chemical formula of C2H6O2. General Applications MEG has numerous applications for manufacture of various products including automotive antifreeze and coolants, resins, deicing fluids, heat transfer fluids, leather, paper, textile fibers, water-based adhesives, sturdy polyethylene terephthalate drink and food containers, latex paints and asphalt emulsions and electrolytic capacitors.

The Cortec Boiler Iguana is a multi-faceted solution for safeguarding hot water boiler systems. Marketed as the "Ultimate Solution For Hot Water Boiler Systems" by Valdamark Direct, it aims to outperform other boiler treatments.  Combining corrosion inhibitor, oxygen scavenger, pH buffer, dispersant, and biocide, the Boiler Iguana offers comprehensive protection.Unlike single-focus treatments, it tackles multiple Issues.Its user-friendly dissolvable pouch simplifies application compared to traditional methods requiring multiple chemicals. Boasting up to 6 months of protection, the Boiler Iguana reduces maintenance costs.Its VpCI-based formula promotes environmental friendliness by avoiding harsh chemicals.While pricier upfront, long-term savings and convenience can offset the initial cost.

A highquality render is a must when designing a display. Our several surface treatments ensure high fidelity, and clear rendering of colors to ensure perfect vision. Antiglare, antireflective and antifingerprint treatments guaranty a perfect user experience.

staining, polishing, varnishing,... NATURAL OXIDES: yellow, red, brown, black STAIN, COLOURED STAIN SYNTHETIC IRON OXIDES: yellow, red, brown, black CHROME OXIDE GREEN COBALT OXIDE: green, blue ULTRAMARINE: blue, violet CARBON- or PITCH-BLACK TITANIUMDIOXIDE WHITE LEAD CHROMATE : yellow, orange WATER-SOLUBLE DYES: acid and basic A dye is a substance that needs a certain affinity with the carrier on which it is being applied. Hence a bond is created and the colouring capacity emerges. Contrary to a pigment, a dye is a dissolvable colorant and the colouring capacity will only show when dissolved. Dyes always have an organic compound. For more than 5000 years, natural resources have been the base for dyes. Leafs, roots and berries are just some of the components. Nowadays, most of these components have been replaced by synthetic variants. Of course, special dyes are applied when considering nutrition.

NAIDEKA, UAB is a client-oriented metal processing company. Also providing services as hot-deep galvanizing, galvanic work, galvanic coatings, welded structures production, powder painting, wet painting.

Membrane cartridge filters ensure the complete removal of microorganisms in sterile liquid applications, or spoilage organism removal to ensure shelf life in food & beverage applications. Known as final, sterile or POU filters, membranes are usually the last filter used in a manufacturing process prior to packaging. All membrane cartridges are constructed from material meeting USFDA Title 21 and USP Class VI. The filter also meets the current USP requirements for extractables. All are steam sterilizable and integrity testable.

Landfill leachate treatment Landfill leachate must not be leaded to the canalization or the recipient untreated. According to the guidelines of environmental protection, waste water hast to fulfill limit values of introduction and reusable water has to be cleaned and separated to be used as process water or maybe as drinking water. So, also landfill leachate – as many other industrial waste waters, too – has to be treated in a way, that introduction into a downstream sewage plant or recipient is according to the law. The multitude of ingredients of the landfill leachate has to be concentrated as much as possible, so that they can be bailed compact and without negative results for the environment. For the treatment of landfill leachate we offer the following processes of conditioning: Treatment of the leachate to reach recipient quality and concentration of the remaining ingredients in a way, that they can be leaded back to the landfill considering the water balance. Water analysis of

Degreasing bath treatment Ultrafiltration is established for a long time for applications like treatment of emulsions, degreasing baths or craft detection oils. With ultrafiltration, oil and dirt particles are separated. So, the particle-free filtrate can be used for degreasing again. According to the recommendations of suppliers for degreasing chemicals tensides are added to the degreasing bath. So, lifetimes up to 3 to 6 months can be reached for degreasing baths. Osmo Membrane Systems GmbH offers an upgrade for your degreasing plant in replacing the polymer pipe modules by ceramic modules. Ceramic modules are more temperature resistant, chemical resistant and changing pH-values. On the one hand, the separation efficiency will be increased and on the other hand, the lifetime of the degreasing plant will be increased significantly, because polymer modules have to be changed much more, depending on the application. The costs for the upgrade are equal to the costs for working with poly

Syndis PG01 is a mixed reagent based on high-active surfactants that contain no hydrophobic substances of the polysiloxanes and mineral oils type. Designed to activate the capillary flow of liquid in the production hydrate in alumina production. Helps to remove bound moisture. The dewatering agent Syndis PG01 can be dosed both into the pulp supply of the last stage hydrate washing and directly in the drum filters. The consumption of the dewatering agent is 10 - 20 g/m3 of the pulp supply. The dosage is selected individually based on the dosing point and the degree of dilution.

Syndis N series are scale inhibitors developed by our company for the production of alumina. They are used at the evaporation stage, effectively eliminate scaling of hydroalumosilicates, hydrogarnets, carbonates inside the space of the evaporator plants. Based on a mixture of effective inhibitors of salt crystal build-up.

Syndis N series are scale inhibitors developed by our company for the production of alumina. They are used at the evaporation stage, effectively eliminate scaling of hydroalumosilicates, hydrogarnets, carbonates inside the space of the evaporator plants. Based on a mixture of effective inhibitors of salt crystal build-up.

ISPM15 is an international standard for phytosanitary measures which is being progressively implemented throughout the world. Already some 28 countries have adopted the standard; a further 21 are in the progress of doing so and about another hundred countries have signalled their intension to bring the requirement to their national regulations. Countries which have signed up to ispm-15 are entitled to refuse entry at their frontiers to goods on wooden pallets, crates, spools or any other wood packaging unless it has been treated, marked and certified in accordance with their regulations. Associated Pallets Ltd has been providing a heat treatment which meets the demands of ISPM-15 and since the introduction of the plant some four years ago, has become experienced in all needs of the wood packaging producer and user.

Electrophoresis and Powder Painting is performed by a fully automated new generation painting system Pre-treatment Preparation of the surface to be painted is the key to successful painting, ensuring adhesion of the layer of paint and resistance to corrosion. Parts are pre-treated non-stop in a tunnel divided into eight stages, using environmentally friendly chemicals; the plant has already been prepared for use of the new nanotechnologies. Pre-treatments: Pre-degreasing Degreasing Rinsing Rinsing Activation Phosphatizing Rinsing Demi-rinsing Electrophoresis Electrophoresis painting is a painting surface treament which gives parts made of iron, steel and other alloys (electrical conductors) improved ability to resist corrosion. It is characterized by uniform depositing of epoxy resin on the surface of the part, ensuring long-lasting good protection against aggression from chemical agents and other factors; it also ensures improved adhesion of top coats of paint. Electrophoresis painting offers several important benefits: Uniform thickness and total covering of all parts, including sharp corners. Ability to control the thickness of the paint by adjusting application voltage and time and paint temperature. Thicknesses of 15 to 40 µ may be obtained, depending on the type of paint (the newest paints can even reach thicknesses of 60 ÷ 70 µ). Excellent resistance in saline mist tests, more than 500 hours, thanks to crystalline phosphatization pre-treatment. Good appearance and therefore top quality finish: the coating of paint is distributed perfectly over the surface. Following electroplating, treated elements are rinsed with ultra-filtered water at the rising unit in the circuit, permitting near-total collection of the paint that adheres to the elements but has not been electroplated. Electrostatic Powder Painting Powder painting is a surface finishing treatment for parts made of metal (aluminum, steel etc.) and alloys characterized by electrostatic application of powder paint which is then polymerized in a kiln. Powder painting prevents corrosion and makes the objects treated resistant to chemical and atmospheric agents. It also permits creation of a vast range of different surface colors and effects: orange-peel, embossed, hammered, etc. The powder painting procedure is ecologically sound because it significantly reduces risk to workers and the environment. Powder painting, electrophoresis or sanding: our mission is achieving excellence in our work through advanced technologies and careful choice of materials. This great care and commitment allows us to pass on the savings resulting from quality and durability to our customers.