Results for
NORELEM FRANCE
France
Steel 1.1213. Stainless steel 1.4034. Stainless steel 1.4112. Version Steel, ground. Steel, ground and hardchromed, chrome coating 5 10 µm. Stainless steel, ground. The precision steel shafts are generally inductively surface hardened. Note The surface value obtained during the inductive hardening process guarantees high surface wear resistance. Suitable for shaft supports 21565. On request Lengths up to a max. 4000 mm. Accessory Shaft supports 21565. Drawing reference 1) chamfered
Request for a quoteNORELEM FRANCE
France
Body and flange plate EN AW5754. Guide shafts steel Version Body, hardcoated Flange plates, anodised. Guide shaft, hardened. Note Maintenancefree pneumatic linear modules with two precision steel shafts and ball guide bushing with wipers. Double acting cylinder drive. All fastening threads have threaded inserts. The as accessory available shock absorbers and proximity switches can be integrated (no protruding edges). Positive fit construction for hundred per cent reproducibility. Combinations in all sizes and stroke variants are feasible without adapter plates. Repeat accuracies of ±0.01 mm are possible. Specified loads apply by centred carriages. On request Available with locking cartridge as stroke deviation safeguard. Accessory See table for shock absorber, proximitiy switch and plug connector.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
shield fulcrum shaft for operation surface material: carbon steel ASTM Gr.D / UNS K02502 finish: black coating size: hexagon incircle diameter 17 mm, length 45 mm thread: M8
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
guiding shaft material: stainless steel 303 manufactured by CNC multi-axis lathe machining length: 204 mm diameter: 4 +0/-0.1 mm 3 threads: M3 2 threads on one end, 1 thread on the other end Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteNORELEM FRANCE
France
Elastomer NBR. Brace ring and tension spring steel. Rotary shaft lip seals are readytoinstall seals for sealing rotating shafts. They are made from an elastomer outer sleeve and an internal bracing shim. The tension spring ensures increased pressure of the lip against the shaft and supports static sealing. Form A DIN 3760 (ISO 6194/1) version, smooth OD. Form AS DIN 3760 (ISO 6194/0) version, smooth OD with extra dust lip to protect from external dirt. The material NBR has a high wear resistance and is resistant to motor fuels, oil, hydraulic oil and lubricating grease. Operating limits Circumferential speed (m/s) ≤12 Pressure (MPa/bar) ≤0.05/0.5 (rotary shaft lip seals are generally meant for unpressurised operation).
Request for a quoteNORELEM FRANCE
France
Cam tool steel, hardened and black oxidised. Shaft carbon steel, hardened and black oxidised. Grip carbon steel, black oxidised. Ball knob black thermoset PF 31. Note: Admissible hand force for the handle. Accessory: Standard handles 06355. Screw-in handles with adjustable torque 06357.
Request for a quoteNORELEM FRANCE
France
Housing polyamide 6. Hollow shaft steel. Screen plastic. Grub screw steel. Version Impactresistant housing. Hollow shaft black oxidised. Grub screw black. Dial black, digits white. Note Position indicators allow direct reading of input measurement values at a glance. In addition, the value indicated per spindle rotation (corresponding spindle pitch) can be selected and the various indicator values are realised by a transmission gear. The position indicators are distinguished by their small construction with very clear display. They are especially suitable for small spindle distances and small shaft diameters and have a torque support that is positioned in a hole on the side. ** At the 1st asterisk give assembly position and at the 2nd asterisk give the count direction (see sample order “assembly position, count direction”). Technical data – Counter consisting of 3 10position dials – Height of figures about 4 mm – Hollow shaft Ø 10 H7 mm
Request for a quoteNORELEM FRANCE
France
Base and rotary table aluminium alloy. Hollow shaft stainless steel. Preloaded worm gear steel. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Rotary positioning stages for motorised adjustment and positioning tasks. The preloaded worm gear runs virtually playfree. The bearing of the worm shaft offers maximum radial rotational accuracy. Cables can be routed through the large bore in the hollow shaft. The adjustable positioning ring is used to determine the rotational reference point to the position of the assembled part. Proximity switches can be mounted with the optionally available sensor holder (21094). The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel. USES: Domestic, agricultural, irrigation, industrial - Transfer and pressure Max temperature. water: 35º C Max sand content: 60 g/m3 Maximum starts per hour: 30 / h Asynchronous single-phase 230 V, three-phase 400 V - Class F Stator cooled with non-toxic and non-polluting mineral oil Stainless steel shaft (AISI 416) - IP 58 Protection Filter, liners, lid in 304 stainless steel Retainer and mechanical seal (aluminum axide-carbon-graphite) Mechanical seal in SIC/SIC on request
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Motor immersed in cooking oil, non-toxic, non-polluting. Externally cooled by the pumped liquid. Insulation class F. Motor protection IP68. Thermal sensors built into the motor winding. Recommended for use with clean water in domestic, civil and agricultural applications, such as water distribution in combination with pressure sets, for irrigation of gardens, allotments and for increasing pressure. Permanent or transportable installation directly on the bottom of the tanks thanks to the lower Noryl guide, shaft and rubber feet on the bottom of the pump, which reduce vibration. Combination of stainless steel in the turbines with Noryl reinforced with fiberglass in the diffusers, offers excellent resistance to abrasion due to sand. Double seals, lip seals and carbon ceramic reinforced mechanical seal. Pump body, pump head and turbines in AISI304 stainless steel and shaft in AIS420 stainless steel.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC Side aspiration IPX4
Request for a quoteMAGAGER, UNIPESSOAL, LDA
Portugal
# Side aspiration Features: Peripheral electric pump Brass turbine Shaft in stainless steel Maximum suction 8 m Electric motor with built-in thermal protection Maximum fluid temperature 40ºC Maximum ambient temperature 40ºC IPX4.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
wheel shaft manufactured by sliding head CNC multiple axis lathe machining material: stainless steel 303 diameter: 10 mm length: 258 mm Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteResults for
Steel shafts - Import exportNumber of results
19 ProductsCountries
Company type
Category