Results for
THOMAS CONSTRUCTIONS MECANIQUES - TCM SAS
France
From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation
Request for a quoteDTB EU
Poland
Characteristics: 140 g/m² 100% Melange Recycled Cotton Long handles: approx. 65 cm Stitching on the handles for greater stability Internal overlock seams Cross Stitched Dimensions: 38 x 42 cm Maximum print area: 30 x 30 cm Suitable for embroidery, Screen, DTG and transfer printing
Request for a quoteNORELEM FRANCE
France
Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
revolving shaft material: free-cutting steel finish: plated with white zinc edge milled, side tapped with thread Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Rexroth Automation Components are used in various production plants.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Siemens drivers,PLC,motors,I/O boards are available as brand new or refurbished. 6SN1118-0AE11-0AA1 6SN1118-0DJ23-0AA1 6SN1122-0BA11-0AA1 6SN1123-1AB00-0BA1 6SN1123-1AA00-0CA1 6SN1123-1AA00-0BA0 6SN1145-1AA01-0AA1 6SN1111-0AB00-0AA0 6SN1118-1NH01-0AA0 6SN1118-0DM11-0AA1 6SN1130-1DB13-0BA0 6SN1118-0DH12-0AA0 6SN1118-0DM11-0AA0 6SN1118-0AA11-0AA0 6SN1114-0AA01-0AA0 6SN1114-0NB01-0AA0 6SN1123-1AB00-0CA2 6SN1118-0AA11-0AA1 6SN1118-0AE11-0AA0 6SN1111-0AA01-0BA2 6SN1113-1AB01-0BA1 6SN1114-0NB00-0AA2 6SN1118-0NK01-0AA1 6SE6400-0PA00-0AA0 6SE6400-2FA00-6AD0 6SE6400-3CC00-4AD3 6SE6400-3CC01-0BD3 6SE6400-3TC03-2CD3 6SE6400-4BC05-0AA0 6SE6420-2UC13-7AA1 6SE1207-2AB03 6SE3111-5CA40 6SE3190-0XX87-8BF0 6SE3211-1DA40 6SE3211-5BA40 6SE3213-6BA40 6SE3213-6CA40 6SE3215-2BB40 6SE3290-0XX87-8PB0 6SE6400-3CC00-2AD0 6SE6401-1DF00-0AA0 6SE7016-1TA20 6SE7016-1TA31 6SE7016-1TA
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Schneider Components are used in various different plants.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Heidenhain components are mainly used in precision machining operations by CNC milling and turning machines.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Yaskawa motors,drivers,PLC and I/O boards are used in various different industries in order to maintain continous production.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Fanuc automation components are used in various different production plants.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Allen Bradley Automation Components are used in various different industries.We supply products and technical service for Allen Bradley components.
Request for a quoteDANTECHS TECHNOLOGY CONSULTANCY INDUSTRY AND TRADE LTD.
Turkey
Mitsubishi Industrial Automation Components which can be used for various different production plants.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
The RC74201 dry contact card (art. CNRL004) is designed to monitor and control the UPS using potentialfree relay contacts. Monitoring is carried out through the relay contacts built into the card, which switch when the corresponding events occur in the UPS. The dry contact card allows you to remotely monitor the status of the UPS by receiving discrete signals when the relay is activated. The relay contacts are not galvanically connected to the electrical circuits of the UPS. An external power supply must be used to obtain the required signals. It also provides the ability to remotely shutdown the UPS by sending a signal to the corresponding port. The use of relay contacts allows the UPS to be integrated into local dispatch systems at customer sites.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard DA807 (art. CNDA807) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin USB port allows you to connect external optional peripherals.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
IMPULS (SYSTEMTECHNIK)
Russia
External SNMPcard BY506 (art. CNBY506) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals. An external power supply is supplied with the card.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard CY504 (part no. CNCY504) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard DA806 (art. CNDA806) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin MiniUSB port allows you to connect external optional peripherals
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMP card DY806 (art. CNDY806) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin MiniUSB port allows connection of external optional peripherals
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard DY801 (art. CNDY801) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard DJ801 (art. CNDJ801) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMPcard BY505 (art. CNBY505) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals.
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
This external bypass module is intended for use with UPS FROSTYLE11, 13 kVA. In Normal Mode, the UPS connects to utility power through the bypass module and provides uninterrupted power to the load. In Bypass Mode, the load is switched to power directly from the external network, bypassing the UPS circuits. The UPS input and output are completely isolated from the loads and the mains. In this mode, the UPS can be safely (and without disconnecting the load) removed from the system for maintenance or replacement
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
The dry contact board (relay card) is used to provide the UPS peripheral monitoring interface. Contact signals can indicate the current status of the UPS. The appearance and pin numbering of the dry contact relay board may differ depending on the UPS model
Request for a quoteIMPULS (SYSTEMTECHNIK)
Russia
SNMP card DL801 (art. CNDL801) is designed to monitor and control the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)
Request for a quoteKEYTRACKER LTD
United Kingdom
10 push-button electronic code.
Request for a quoteKEYTRACKER LTD
United Kingdom
The smart way to secure and monitor your keys without restricting users or using time-consuming processes for recording key usage. The unlocked positions are ideal for any organisation with keys open to all staff, such as Motor Dealerships and Estate Agencies.
Request for a quoteResults for
Electronics - Import exportNumber of results
40 ProductsCountries
Company type
Category