Electronic - Import export

From the design phase of your project, we take care of installing all the electrical and electronic components: electrical studies PLC studies and programming production of electrical diagrams, wiring and installation logbooks wiring of power cabinets, control cabinets (automation), pneumatic cabinets and frames installation of cable trays on-site connection final inspection, power up and validation

Characteristics: 140 g/m² 100% Melange Recycled Cotton Long handles: approx. 65 cm Stitching on the handles for greater stability Internal overlock seams Cross Stitched Dimensions: 38 x 42 cm Maximum print area: 30 x 30 cm Suitable for embroidery, Screen, DTG and transfer printing

Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.

revolving shaft material: free-cutting steel finish: plated with white zinc edge milled, side tapped with thread Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Wireway Fastener material: aluminum alloy 6061-T4 thread grade: rolled/cut 3/8-18 NPSM thread x 0.39 +/-0.04 inch size: cap outer diameter 0.995-0.997 inch, height 2.50±0.03 inch cap slot - width 0.062±0.010 inch, depth 0.093±0.010 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

Siemens drivers,PLC,motors,I/O boards are available as brand new or refurbished. Siemens components available in stock; 6ES7516-3FN02-0AB0 6ES7515-2FM02-0AB0 6ES7516-3AN02-0AB0 6AV2124-0QC02-0AX1 6ES7515-2AM02-0AB0 6ES73152EH140AB0 6ES7314-6EH04-0AB0 6ES7512-1SK01-0AB0 6AV2124-0MC01-0AX0 6AV2124-0JC01-0AX0 6ES7526-2BF00-0AB0 6GK7543-1AX00-0XE0 6SL3120-2TE21-0AD0 6SL3210-1KE23-8AF1 6SL3120-2TE15-0AD0 6SL3120-2TE13-0AD0

A06B-6093-H152 Beta Servo Drive MDL SVU-20, I/O LINK. This servo drive is designed to meet the demands of various industrial applications, providing exceptional performance with every use. Equipped with a Tapered Shaft (TPR) design, this servo drive ensures a secure and efficient connection to your machinery. The inclusion of the I/O Link feature enhances connectivity and communication capabilities, allowing for seamless integration into your existing systems. Whether you're looking to upgrade your current setup or enhance the functionality of your equipment, the A06B-6093-H152 is the ideal solution.

Schneider Components are used in various different plants. Schneider components in our stock: ATV630C22N4 LMC402CAA10000 ATV71HD75N4 BMEP584040 ATV930D90N4 ATV630D90N4 ATV930D75N4 ATV630D75N4 ATV71HD37N4Z ATV930D55N4 ATV630D55N4 ATV930D45N4 BMEP582040 HMIDT732 ATV71HD22N4 BME-CRA-312-10 ATV630D45N4 ATV930D37N4 ATV340D37N4E ATV71HD22N4Z ATV630D37N4 ATV71HD18N4 HMIDT642 ATV71HD18N4Z HMIGTO6310 ATV930D30N4 ATV630D30N4 BMEP581020 ATV71HD15N4Z ATV930D22N4 ATV630D18N4 ATV-312HU55N4 ATV930D18N4 ATV630D22N4 ATV312HU75N4 ATV340D18N4E ATV340D30N4E

Lenze components in our stock: EVF9331-EV EVF9328-EV EVS9331-ES EVS9329-ES EVS9328-ESV004 EVS9327-ESV004 EVS9327-ES EVS9327-EP EMB9342-E EVS9326-EPV004 EVS9324-EPV004 EVS9328-ES EVS9325-ES EVF9326-EV EVS9324-ET EVS9324-ESV004 EVS9324-ES EVS9325-EKV004 EVS9326-ESV004 E94ASHE0244 EVS9322-EP E82MV751_4B001 E82EV223K4B201 EVS9321-ES EVS9326-ES E82EV113K4C EVF9325-EV EVS9325-EP E82EV113K4C200 E94AMHE0134 EVS9324-EP EVS9323-ES EVS9323-EP E82EV402K4C200 EVS9322-ES E82EV552-K4C E82EV402K4C E84AVSCE1134SX0 E94AMHE0074 E82EV152K4C E94AMHE0034 E84AVSCE7524SX0 E82EV222K4C E82EV551K4C EVS9332-ES EVF9330-EV EVS9329-EPV004 EVS9327-ETV911 EVS9325-ET EVS9325-ESV004 EVS9325-CSV003 E82EV223K4B241 EVS9322-ET EVS9322-ETV004 EVS9322-ETV911 E84AVTCE1534SB0 EVS9324-EKV004 E82EV752K4C E94ASHE0134 EVS9321-EK EVS9326-EP E84AVSCE5524SX0 E94APNE1004 E94ASHE0074 EVF9324-EV E82EV552K4C200 EVS9324-EP(13323963) E84AVTCE5524VX0 E82EV302K4C E82EV552K4C

Yaskawa motors,drivers,PLC and I/O boards are used in various different industries in order to maintain continous production.

Fanuc automation components are used in various different production plants. Fanuc components in stock: IC695ALG616 IC695CPU310 A06B-6104-H275H520 A05B-2600-C001 A06B-6121-H075H570 A06B-0257-B111 A06B-6154-H030#H590 IC698CRE030 A06B-6202-H037 A02B-0319-B802 A02B-0309-B522 A06B-6112-H022 H550 D A06B-6290-H205 A06B-6150-H060 8851-LC-MT A05B-2601-C402 IC695CPE305 A06B-6111-H026H550 A06B-6151-H015H580 A06B-6112-H011 H550 B A06B-6132-H003 A06B 6110 H026 A20B-8101-0790 A06B-2041-B605#0042 A06B-6096-H301 A06B-2268-B605 A06B-6220-H015H600 A20B-8201-0081/04A A03B-0817-C001 A06B-6070-H005 A06B-6117-H211 A06B-6117-H303 A06B-6127-H209 A06B-2238-B605 IC695PBM300 A06B-6093-H152 A06B-6115-H003 A06B-6124-H105 A06B-0034-B575 A06B-0243-B101 A06B-6096-H106 A06B-6096-H201 A06B-6096-H208 A06B-6117-H105 A06B-0377-B6757075 A20B-8200-0542 IC695PNS001 A02B-0319-C243

Allen Bradley Automation Components are used in various different industries.We supply products and technical service for Allen Bradley components. Allen Bradley Components in stock: 1756-L82ES 1756-OF8H 1756-L81E 1756-L72 2711P-T15C22D9P 1756-EN3TR 2711P-T12W21D8S 20750ENETR 1756-L71 1769-L27ERM-QBFC1B 1769-L36ERM 2711P-T12W22D9P 2711PT12W22D9P 2198-H025-ERS 1756OF8I 2711P-T10C22D9P 1769-L24ER-QBFC1B 1756-EN2TR 1769-L33ER 1756-IRT8I 1769-IR6 2711P-T10C21D8S 25BD043N114 1769-L18ER-BB1B 1756-ENBT 1783-NATR 1756-EN2T 1769-L30ER 5069-OF8 1756-OF8 20-750-S 25B-D024-N114 2711P-T7C21D8S 1756-IF16 1769L16ERBB1B 1769-OF8C 25B-D030N104 1794-OE12 25B-D030N114 2711P-T6C21D8S 2711RT10T 1756-IF16H 1756-IF8H NZMN4-ME1400 1734-IE4S 5069-L310ER NZMH4-AE1250 5069-L320ER NZMH4-AE1600 2198-P141 2198-D020-ERS3 2198-D032-ERS3 1756-IF8I NZMH4-AE1000 1763-L16BWA 2711P-T7C22D9P 5069-L306ER 20F11ND022AA0NNNNN 1756-IA16I

SEW Industrial Automation Components which can be used for various different production plants.

The RC74201 dry contact card (art. CNRL004) is designed to monitor and control the UPS using potentialfree relay contacts. Monitoring is carried out through the relay contacts built into the card, which switch when the corresponding events occur in the UPS. The dry contact card allows you to remotely monitor the status of the UPS by receiving discrete signals when the relay is activated. The relay contacts are not galvanically connected to the electrical circuits of the UPS. An external power supply must be used to obtain the required signals. It also provides the ability to remotely shutdown the UPS by sending a signal to the corresponding port. The use of relay contacts allows the UPS to be integrated into local dispatch systems at customer sites.

SNMPcard DA807 (art. CNDA807) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin USB port allows you to connect external optional peripherals.

SNMP card DL802 (art. CNDL802) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

External SNMPcard BY506 (art. CNBY506) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals. An external power supply is supplied with the card.

SNMPcard CY504 (part no. CNCY504) is designed for monitoring and controlling the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DA806 (art. CNDA806) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. The builtin MiniUSB port allows you to connect external optional peripherals

SNMP card DY806 (art. CNDY806) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin MiniUSB port allows connection of external optional peripherals

SNMPcard DY801 (art. CNDY801) is designed to monitor the status and control of the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols.

SNMPcard DJ801 (art. CNDJ801) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

SNMPcard BY505 (art. CNBY505) is designed to monitor and control the UPS over a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification). This card model supports encryption protocols. Builtin additional ports allow you to connect external optional peripherals.

This external bypass module is intended for use with UPS FROSTYLE11, 13 kVA. In Normal Mode, the UPS connects to utility power through the bypass module and provides uninterrupted power to the load. In Bypass Mode, the load is switched to power directly from the external network, bypassing the UPS circuits. The UPS input and output are completely isolated from the loads and the mains. In this mode, the UPS can be safely (and without disconnecting the load) removed from the system for maintenance or replacement

The dry contact board (relay card) is used to provide the UPS peripheral monitoring interface. Contact signals can indicate the current status of the UPS. The appearance and pin numbering of the dry contact relay board may differ depending on the UPS model

SNMP card DL801 (art. CNDL801) is designed to monitor and control the UPS via a local area network or the Internet. Monitoring, control and configuration are carried out through the builtin WEBinterface, TelNet or NMS, with the provision of automatic correct shutdown of servers and workstations connected to the UPS. The SNMP card allows you to remotely monitor the values ​​of the input and output parameters of the UPS, the battery charge level, notify the user about system events and alarms through the builtin WEB interface, via the SNMP protocol (including by sending Trap messages in the event of emergency situations) and by sending messages by email. It also provides the ability to remotely control the UPS (reboot, activation of tests, on / off sound notification)

The smart way to secure and monitor your keys without restricting users or using time-consuming processes for recording key usage. The unlocked positions are ideal for any organisation with keys open to all staff, such as Motor Dealerships and Estate Agencies.

10 push-button electronic code.