Results for
LISINE EPSTEIN COSMETICS BV
Belgium
BeNatural Compact Powder to smooth and enrich your natural complexion The creamy texture makes it easy to apply. Perfect for a natural looking color. Create your own look thanks to its soft texture and buildable formula. Velvety and easy to apply! BeNatural Compact Powder gives you a pure and natural look and smoothens your skin. Let your face radiate and accentuate your natural beauty. The powder allows you to apply it evenly, without leaving dusty residues. The result is a compact and homogeneous skin. Thanks to highly absorbent active ingredients, it helps reduce the production of sebum and improves the sensorial perception of products. Our powders are biodegradable, which result in a velvety touch and improve the adhesion and the smoothness. The soft focus properties help minimize skin imperfections.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Filter+regulator+lubricator maintenance unit of the compact series Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1bar: 280 Nl/min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Compact series pressure regulator with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
filter water separator Sizes: 1/8" and 1/4" Filter fineness: 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 450 Nl / min Pressure range up to 15 bar
Request for a quoteLISINE EPSTEIN COSMETICS BV
Belgium
The creamy texture makes it easy to apply. Perfect for a natural looking color, soft texture and buildable formula for a customized and natural look. Velvety and easy to apply! BeNatural Bronzing Powder is the secret of a sun-kissed face. Let your face radiate and accentuate your natural beauty. The powder allows you to apply your bronzer evenly, without leaving dusty residues. The result is a compact and homogeneous skin. Thanks to highly absorbent active ingredients, it helps reduce the production of sebum and improves the sensorial perception of products. Our powders are biodegradable, which result in a velvety touch and improve the adhesion and the smoothness. The soft focus properties help minimize skin imperfections. 96% natural ingredients
Request for a quoteNORELEM FRANCE
France
This quarter-turn lock is vibration-resistant through a detent mechanism in the end position. Right or left mounting with 90° closing and internal rotation limit. The quarter-turn lock can be installed pre-assembled (limitations by small A-dimensions and thick doors). Tested according to DIN EN 60068-2-64 (vibration) and DIN EN 60068-2-27 (shock), test standard 61373. Vibration-proof as per rail applications category 1, class B requirements (highest requirement). Water and dust proof as per IP65 through O-ring and flat seal. Order the required tongue version separately. Every tongue can be combined with every housing. Accessory: Lock key 05586 Drawing reference: Actuation: a) square 6 mm b) slot c) triangle 6,5 mm
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Compact series lubricators with plastic housing Sizes: 1/8" and 1/4" Flow rate at 6 bar with ∆p 1 bar: 700 Nl/min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Filter regulator of the compact series with plastic housing Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 600 Nl/min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pressure regulator of the compact series for water Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Compact series filters with plastic housing Sizes: 1/8" and 1/4" Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 Nl / min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The AT multi-turn actuators are characterized by their compact shape and clear design. Integrated grooves for sensor mounting. Angle of rotation from 0° to 180°.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Thanks to their compact but stable design, the CM compact cylinders are particularly suitable for use in small spaces. Diameter range between 20 and 63 mm. Also with anti-twist device.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Great thrust and small installation space. CP cylinder diameter 125 - 200 mm in a compact but robust design.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
NORELEM FRANCE
France
Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Cable bend radius, > 17 mm (static). Note Works with magnetic tapes 21725. The reading distance between the sensor and tape must be 0.1 to 2 mm. The sensor is supplied with operating voltage and draws current via the electronics. System accuracy, repeat accuracy and travel speed is dependent on the electronics. Plugin connection to position indicators 21700 and 21702. Technical data Rating IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068227 Vibration resistance 200 m/s², 50 Hz–2 kHz; EN 6006826 Temperature range Ambient temperature 0…60°C Storage temperature 10…70°C Assembly Installation must be carried out using the enclosed user information. A, reading distance sensor/tape ≤ 2 mm B, lateral offset ± 2 mm C, misalignment ± 3° D, pitch gradient ± 1° E, lateral gradient ± 3°
Request for a quoteNORELEM FRANCE
France
Doubleacting pneumatic cylinder acc. to DIN ISO 21287. Piston rod with internal or external thread, position detection for proximity switch and flexible damping on both sides. Thanks to their compact structural dimensions, compact cylinders are ideal for use in installation spaces where space is limited.
Request for a quoteNORELEM FRANCE
France
The surface of the cap nut is polished and, with regard to design optimised for the use in hygienic environments. The top of the nut is spherical and the collar has a conical formed top face. The nut has been designed as a low version so as to keep troublesome corners as few as possible. Due to the extremely high quality surface finish of much less than Ra 0.8 µm, hardly any dirt particles adhere to the surface.
Request for a quoteNORELEM FRANCE
France
Shell, ballbearing steel. Cage, plastic. Balls, steel. Note With seals both ends. The linear ball bearing is secured using DIN 471 / 472 circlips. Application Suitable for applications where installation space is limited.
Request for a quoteNORELEM FRANCE
France
The 5-axis vice features excellent stability and flexibility, and is extremely easy to use. The 5-axis vice can be used as a positive-down force vice or normal vice. When the positive down force function is used, the workpiece can be held with a repeat accuracy of ±0.01 mm. A workpiece clamping height of 180 mm enables easy access during machining. The clamping width is preset using the crank handle, cutting down on setup times. Additionally, the closed geometries and the resistance to dirt that they provide keep maintenance and repair times to a minimum.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Filter + filter water separator Sizes: 1/8" and 1/4" Filter fineness: 5 µm + 0.01 µm Flow rate at 6 bar with ∆p 1 bar: 370 Nl / min Pressure range up to 15 bar
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pressure regulator of the compact series, quick exhaust Sizes: 1/8" and 1/4" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Flow rate at 6 bar with ∆p 1bar: 600 Nl/min Pressure range up to 15 bar
Request for a quoteNORELEM FRANCE
France
Roller and cage polyamide, glassbead reinforced. Steel axis. Cage black. Roller available in different colours. The roller elements are matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. No tools required. The compact design with a small centre distance is optimally designed for the lowvibration conveyance of sensitive items. Suitable for aluminium profiles Type B and I.
Request for a quoteNORELEM FRANCE
France
The easy operability and rapid adjustment using a scale means that the clamping jaws can be quickly and surely adapted to new workpieces The workpiece is always centred through the systematic construction of the 5-axis compact clamping system. The optimal accessibility to the workpiece allows short, standard tooling to be used. Tooling costs are significantly reduced. Positive down force by a clamping depth of >5 mm. Clamping widths of 20 mm to 320 mm are possible. Assembly: The 5-axis clamping system compact can be mounted on T-slot tables, grid systems or, using an adapter flange on conventional zero-point clamping systems. Accessory: Seating ledge 41345 Jaw plates 41320 Pendulum jaws 41325 Centre jaws 41335 Coupling for cross-clamping 41365 Order the seating ledges and jaw plates with pins separately.
Request for a quoteNORELEM FRANCE
France
The readytoinstall compact linear housing consists of extruded aluminium housing, installed linear ball bearing 2151102 and doublesided seal. Recommended shaft tolerance h6. Load rating according to specification of the linear ball bearing. With lubrication hole M8x1. Accessory Precision guide shafts 21595. Fastening screws 07160.
Request for a quoteHAJ TEX GROUP
Uzbekistan
THREAD NUMBER: NE20/1*NE20/1 (CD) NUMBER OF THREADS: 56X56 WIDTH (CM): 165 DENSITY (G/M2): 140 WEAVE: 1/1
Request for a quoteHAJ TEX GROUP
Uzbekistan
THREAD NUMBER: NE30/1 *NE 30/1 (OE) (CD) NUMBER OF THREADS: 108X55 WIDTH (CM): 170 DENSITY (G/M2): 150 WEAVE: 3/1
Request for a quoteResults for
Compacting - Import exportNumber of results
39 ProductsCountries
Company type