Aluminium - Import export

Aluminium 6060 T5. Cover plug PA 6.6. Version: Black anodised. Colourless anodised. Note: These hinges have stainless steel tension springs which enables doors and hatches to open or close automatically. Opening angle 270°. Spring torque opening: M(0°): 0.7 Nm / M(90°): 0.5 Nm / M(180°): 0.3 Nm Fastened with DIN 7991 countersunk screws.

The readytoinstall compact linear housing consists of extruded aluminium housing, installed linear ball bearing 2151102 and doublesided seal. Recommended shaft tolerance h6. Load rating according to specification of the linear ball bearing. With lubrication hole M8x1. Accessory Precision guide shafts 21595. Fastening screws 07160.

Lightweight aluminium profile for weightoptimised constructions.

The MB-Slimline window system with a thermal break and high thermal insulation performance features a very small width of aluminum profiles visible on the outside of the structure. The system meets all the requirements relating to energy saving and environmental protection.

MB-GLASS BARRIER-based external balustrades are used on upper floors with opening French doors or floor to ceiling full high windows as a safety element to prevent from falling. Additionally can also help to reduce noise coming from the outside. When attached to aluminium windows, they can perfectly fit their colour.

Door and window systems with a thermal barrier MB-70HI, MB-70US HI and a curtain wall based on the MB-70CW HI windows. Their construction is based on well-proven, well developed and highly appreciated base systems, i.e. MB-70, MB-70US i MB-70CW. Enhanced thermal insulation performance is achieved due to placing special insulating inserts in the central insulating chamber, formed by connecting aluminium profiles with thermal breaks. Thus formed inserts reduce heat transfer through this chamber due to low value of heat transfer coefficient. The central location of inserts additionally limits convection and thermal radiation.

The MB-104 Passive window system with a thermal break featuring very good thermal insulation properties meets all the requirements imposed on the elements used in passive buildings.

The best terms for construction projects accredited with Rehau quality standards, the Euro Design 70 is an economically efficient window system. Many designs possibilities using various shapes and colors.

Aluminium Profiles it is frequently used in : Automotive Industry,Precision engineering, windows , dors , telecommunications , advertising industry , furniture production and others .

Hinged window system with a frame depth of 80mm Polyamide strip length 45mm Maximum glazing thickness 65mm

We specialise in CNC precision machining of metal alloys, composites and industrial plastics, as well as welding, for the production of parts for a wide range of industrial applications, with project development and assembly if required

GJL 250 annealed or EN AW-7075. Drawing reference: machined faces: ±0.25 mm length tolerance: ≤200 mm: +3/+10 >200 mm ≤590 mm: +8/+15 ≥600 mm: +20/+50

Housing anodised aluminium. Bearing surface Frelon (Teflon plus proprietary fillers). Virtually chemically inert. Selflubricating (no additional lubrication required). High temperature range (240 °C to +260 °C). Dampens vibrations. High static load capacity projected surface area x P (P = 1034 N/cm²) Suitable for food, pharmaceutical, medical and chemical applications. Insensitive to dirt.

These brackets are used to hang aluminium profiles for roller rails in a round profile. A mounting set is supplied.

Ball stainless steel. Housing steel. Cage polyamide, carbonfibre reinforced. These ball transfer units are matched to the aluminium profiles for roller rails and can be mounted on them quickly and easily. For flexible movements in two dimensions. With a lowwear and lowfriction ball rollers. No tools required. Suitable for aluminium profiles Type B and I.

The connecting sets are used to connect two aluminium profiles at right angles. They allow free position of the profiles. The profile slots positioned at rightangles to each other remain free. Panel elements can be positioned in the profile slots without additional machining. Due to the reduced clamping force and omitted rotation locks, these connecting sets should only be used in combination with panel elements and lightly loaded constructions. Low workload. To assemble a hole must be drilled into one of the profiles. The D2 hole can also be drilled through.

The connecting sets are used for connecting two aluminium profiles at right angles. The connection is nonrotating. For larger profiles several connecting sets can be mounted on the end for greater strength Low workload. Cut a thread in the end face core hole. Drill a through hole for tightening the screw in the opposing profile.

Lightweight aluminium profile for weightoptimised constructions.

The aluminium profile is matched to the roller elements. As a result, roller rails and roller tracks can be realised. The different inserts permit modular and flexible setup.

Aluminium profile for general structures. The round tube, also referred to as a profile tube forms a feed roller when used in combination with bearing flanges (10400).

Aluminium profile for general constructions.

Stainless steel tubes 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Stainless steel round bars 1.4301 1.4404 1.4571 1.4541 1.4021 1.4006 1.4104 Welded and seamless stainless steel tubes 904L 1.4539 UB6 - Full stainless steel round bars UB6 904L 1.4539 Refractory tubes and round bars 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex tubes UNS S31803 1.4462 Super duplex tubes UNS S32750 S32760 1.4410 1.4501 Duplex super duplex full round bars 1.4462 1.4410 1.4501 Stainless steel sheets 1.4301 304L 1.4404 316L 1.4571 316TI, 321, 1.4541 Refractory sheet 309 1.4828 1.4833 310 310S 1.4841 1.4845- Duplex sheets UNS S31803 1.4462 Super duplex sheets UNS S32750 S32760 1.4410 1.4501 Stainless steel sheets UB6 904L 1.4539 Alloy tubes 600; 601; 800; 825 Hastelloy C276 - Tubes and sheets 2.4816; 2.4851; 2.4856; 2.4360 Duplex super duplex stainless steel flanges 904L UB6 1.4539

end tube extension fastener material: aluminum alloy 6061-T4 outer diameter: 1.00±0.03 inch length: 2.07±0.03 inch cap socket hex incircle diameter 0.390 +0.010/-0.000 inch, accept 3/8 inch hex key, depth min. 0.50±0.03 inch external thread: NPSM 3/8-18 x 1.00±0.03 inch Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.

it is a very visually attractive and, at the same time, technologically advanced product, which due to its design solution and the rich diversity of colours for door fill, it can be , not only the functional and durable entrance into your home but also mark and decoration.

SYNEGO profile system ensures a pleasant temperature .a high level of comfort and safety for your home provides up to 50% better therm insulation.this will significantly reduce heating cost .

Among CNC machining our service offer includes welding. We can machine and weld parts, assemblies, all according to the provided documentations.

We produce runners in pure copper, aluminium bronze, tin and lead bronze as well as brass. Pieces are delivered as-cast, rough or fully machined.

Extruded Aluminium is used also in countless applications. Functional or fully machined control panels Ready to install electronic enclosures

Coloricio can sell steel sections (hollow and open) seam and seamless. The products are made on the basis of good quality steel and meet applicable standards. We use constructional alloy steel and fine grain steel for their production. They are willingly chosen by companies specialising in the building and machine-building industries.