Structures for lifts - Import export

secutex has developed the new “TopDrain” structure surface for lifting wet or oily components. Most of the damages at sharp or rough edges are caused by the movement of the load across the sling. In the case of loads with a “sharp edge” or with a very rough surface, a protective sleeve or fixed coating must be used to protect the textile lifting sling. If the load moves sideways, a cutting movement on the edge is the result. Similar to a knife blade, the edge can cut through the fibers of the textile sling. The new “TopDrain” surface drainage provides good adhesion of the protective sleeves and the coated lifting slings even on wet and oily materials. The liquid can drain off into the surface hollows and the load lies securely in the lifting sling. The “TopDrain” structure works like a drainage and ensures the frictional connection of the secutex coating to the load.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 AS with wide structure - shipped fully assembled! Lifts for pallet with hydraulic foot pump and steering or battery operation, steel structure with rounded tip of the forks, directional wheels in nylon with brakes and two front needle roller, fixed forks. (CE certificate). Version with forks width adjustable from 220 to 950 mm and wide frame. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder.

FPHK 285-C - DRUMS TILTER FOR FORKLIFTERS The FPHK 285-C tilter has a fork-mounted structure and is suitable for lifting and emptying metal drums from lt. 200 with diameter mm. 580-600. The device is complete with a band for locking the drum, a frontal safety rod and an angular transmission with a handwheel for rotation. The tilter can also lift plastic drums with edges but only of the type that can be seen in the picture.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1030 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator, thanks to the minimum height of the mast of 2080 mm, it allows to pass under the majority of doors and openings. The lifter height of 2080 mm also keeps raising the load to a height of about 15-20 cm.Over 20 cm of lifting, the structure begins to slip and the height of the trolley increases to reach 3.5 meters when the load is raised to 3 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.

The PRINCIPAL-P, a high-performance portal palletizer, combines the high speed of the PRINCIPAL-H with a gripper adapted to the respective application, e.g. combined grippers for palletizing bags and boxes. The great advantage of the PRINCIPAL-P is that it does not push bags, but lays them down and can therefore palletize them overlapping. Furthermore, the bags are pressed from all four sides to obtain a well-structured layer pattern. Boxes are also lifted, laid and afterwards the layer is formed. When arranging the bags or boxes, it is ensured that the bags or boxes are brought into the required position, e.g. barcodes can be read from the outside. In addition, a robot can be installed for possible depalletizing work. Further options enable the PRINCIPAL-P to be optimally adapted to customer requirements.

If you need a powerful and reliable tool for heavy load lifting duties, The Ronix RH4901, 2-ton hydraulic bottle jack might be what you are looking for. Ronix Tools provides a variety of different hydraulic jacks. Many bottle jacks are designed based on versatility; they are suitable for a range of lifting tasks, from supporting beams and other structures to repairing duties and lifting light and heavy machinery. All Ronix Tools jacks are designed for ease of use, and everyone, from a professional mechanic to a DIY home worker, can enjoy lifting different objects. Ronix RH-4901, a 2-ton hydraulic bottle jack can get the job done safely, even though it can lift heavy objects

Comfortable Home Lifts Devas NovaLIFT is applied in buildings that are excluded from the lift shaft during the project phase, for families with small babies, elderly people with temporary chronic diseases and pregnant women who have difficulty in climbing stairs, in buildings without a shaft bottom operating at a speed of 15cm/sec. It is easily installed in new or old duplex, triplex houses and villas, office and business centres, shops and apartment spaces. With its oval structure, it is the smallest lift model especially suitable for stairwells where a home lift cannot be built.

3DMicromac‘s microPRO™ is an adaptable laser micromachining system mainly used in industrial production. Its high versatility makes the system perfectly suited for industrial laser micromachining tasks such as laser structuring, cutting, and drilling applications. Furthermore, it is suitable for a variety of materials, e.g., metals, alloys, transparent and biological substrates, ceramics, and thin film compound systems. The microPRO™ is available with an automatic handling system for wafers, cassettes, trays, etc The microPRO™ enables the laser processing of various substrates. Due to the integration of different technology modules, the platform can be adapted to customers’ requirements. Configuration packages may include High speed cutting Drilling Engraving Structuring and modification Laser Lift Off (LLO) Cylindrical machining Customized solutions

ALUMINUM STRUCTURES: -window and door constructions; - sliding, lifting-sliding, parallel-sliding systems; -automatic doors; -balcony sliding systems; -arched structures; -office partitions; -winter gardens; -aluminum blinds. FACADE SYSTEMS: -transparent (classical, semi-structural, structural facade); -ventilated (hpl and composite panels).

Mechanical & Structural Mechanical design is at the heart of what we do from initial concept to 3D models & Fabrication we work at all stages of the project cycle delivering cost effective, safe and reliable solutions across a wide range of back deck machinery and structures. Finite Element Analysis We have years of experience using FEA to optimise design, we perform analysis considering all load case scenarios mimicking real world circumstances. Sea Fastening Our experience in sea fastening design extends to worldwide transportation and construction vessels. We carry our transit and operational designs of ISO Shipping containers, Launch & Recovery System, Winch and Installation Reels, Temporary Deck Structures, Spools, bespoke loads. Lifting & Handling Heavy lifting has a pivotal role in industrial construction and plant maintenance projects across all sector of industries, we provide design and build solutions for:

The frame of the MAXIM panels is made of structural steel or aluminum. Due to the special all-round profile and the associated functional accessories, MAXIM panels are designed for different structures (wall formations, round walls, lift shafts and retaining walls) and allow the realization of a variety of projects.