Straight plastics - Import export

item number : BA 572 R 380/70 Description : Bak Size : 380 x 260 x 70 mm. Contents : 5000 ml. Material : Polystyreen (PS) Pieces per box : 100 Boxes per pallet location : 16 Particularities : Minimum production run Matching lid(s) item number : BA RD 380 lid Description : 380 x 260 mm. Material : PETG Pieces per box : 100 Boxes per pallet location : 20

item number : BA 585 Cady 5 L Description : Bak Size : 335 x 145 x 128 mm. Contents : 5000 ml. Material : Polypropylene (PP) Pieces per box : 484 Boxes per pallet location : 2 Matching lid(s) item number : BA cady 5 L lid Description : 335 x 145 mm. Material : Polypropylene (PP) Pieces per box : 120 Boxes per pallet location : 20

Injection moulded, straight teeth. Engagement angle 20°. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Due to the material properties, plastic gear racks are not straightened. L= nominal length 250 mm. The actual length is roughly a whole multiple of the pitch.

Injection moulded, straight teeth. Engagement angle 20°. Axis angle = 90°. Machined bores from module 1.5. Polyacetal, white. Polyketone, ivory tone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. Bevel gear wheels are supplied as single components. To obtain a pair of bevel gear wheels, please order the specified mating gear as well.

Injection moulded, straight teeth. Engagement angle 20°. Machined bore. Polyacetal, white. Polyketone, ivorytone. Note Polyacetal Standard material with high hardness grade and low coefficient of friction. Polyketone Material with significantly longer service life, higher power transmission and greater security against tooth breakage due to the extraordinarily high wear resistance and very good tribological properties. Can be used under water and other media. Injection moulded gear wheels may have internal manufacturerelated cavities. These may become visible during drilling or broaching. They do not impair the function. The torques specified in the tables relate exclusively to the toothing.

Press-In Inserts are designed to be pressed into a straight hole without melting the plastic prior to installation. Ideal for use in softer plastics, the helical knurls of the Press-In Inserts are used to provide both torque and pull-out resistance and to ensure good plastic flow as the Insert rotates into the hole. Installation torque to achieve sufficient tension between the threads is not a problem in that the helical knurls are designed so that the direction of the installation torque will have the tendency to drive the Insert into the hole — which of course is not possible — as the threaded joint is tightened. A pilot only slightly smaller than the hole and of sufficient length is designed to assure straight insertion into the hole. Press-In Inserts offer rapid installation with no specialized equipment and achieve good overall joint performance. If installation equipment is required, SPIROL also offers a standard comprehensive line of Insert Installation Equipment.

The SONIC-SERT are inserts for plastic with heat/ultrasonic installation into cylindrical holes Suitable for all types of thermoplastics They are designed for quick and economical installation Opposing knurls of the insert offer high torque and pull out performance Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet Also known as SONIC-LOK, with equivalent shape, features and dimensions

The S19, S20 (Short version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes In the short version these inserts offer the advantage of having reduced dimensions, shorter installation times and lower costs. On the other hand, the resistance to torque and pull out loads is reduced comparing to long version Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet

The S19, S20 (Long version) are inserts for plastic with heat/ultrasonic installation into cylindrical holes These are the longer versions of the S19, S20 Short inserts for higher torque and pull-out resistance Suitable for all types of thermoplastics, even dry and fragile ones such as polycarbonates The S19, S20 inserts are designed with a wide center knurl coupled with two smaller knurls and deep undercuts on both ends to maximize torque and pull out performance They induce very low radial stresses and are therefore particularly recommended in holes with thin walls. In this case the hole must be a bit wider. Optimal size should be determined after appropriate practical tests Installation must be carried out using heat conduction or ultrasonic machines. The holes should be sized as indicated in the product datasheet

Description: Sustainable and eco-friendly plastic cosmetic jar, is made of recyclable and recycled (PCR) PP material, making it a perfect choice for those who care about the environment. We offer wholesale and custom options for this high-quality cosmetic jar. Make the eco-conscious choice for your beauty products today! Use for: mainly used as empty cosmetic containers for face cream, lotion, facial masks and body care products etc. The decoration is available: customized injection color, UV lacquered or electroplated in a matte or glossy finish, silk-screen printing, foil hot stamping etc.

Description: one piece glass cosmetic concentrate jar with straight divider in the middle, seperate 60ml glass jar into 2x30ml, fit with straight-sided plastic lid sitting flush on the side, as primary cosmetic and makeup packaging for eye cream, lip balm and eye makeup formulas like eyeshadow. Use for: empty container for eyeshadow, eyecream, lip balm, solid fragrance etc. The decoration is available: clear, frosted and color sprayed in a matte or glossy finish, silk-screen printing, foil hot stamping etc;

Description: one piece glass cosmetic concentrate jar with straight divider in the middle, seperate 20ml glass jar into 2x10ml, fit with straight-sided plastic lid sitting flush on the side, as primary cosmetic and makeup packaging for eye cream, lip balm and eye makeup formulas like eyeshadow. Use for: empty container for eyeshadow, eyecream, lip balm, solid fragrance etc. The decoration is available: clear, frosted and color sprayed in a matte or glossy finish, silk-screen printing, foil hot stamping etc;

“Bending” is a manufacturing process that produces a V-shape, U-shape, or channel shape along a straight axis in plastic materials, most commonly sheet metal. Commonly used equipment includes box and cup brakes, press brakes, and other specialised machine presses. Typical products that are produced in this way are boxes, such as electrical enclosures and rectangular ducts. Bending sheet steel The combination of modern presses, advanced matrix, stamps and the experience of our employees provides excellent results in the form of professionally performed artistic processing of various sheets. We bend sheets quickly and extremely precisely, and thanks to the fact that the process is fully repeatable and automatic, we can undertake even very large orders. The maximum pressure of our machines is as much as 200 tons, thanks to which we can undertake artistic processing of materials with a thickness of 6 mm over a length of 3 meters.

Overview Quick Details Place of Origin: Jiangxi, China Brand Name: BEISU Model Number: BS000111 Type: Baby bath tools Material: Plastic, PP Plastic Shape: Straight Body Age Range: 0-12 MONTHS, 1-2 Years Technics: Injection Product: Bathtub Usage: Bath Specification: As customized Functional design: Multifunction Commercial Buyer: Super Markets, Specialty Stores, E-commerce Stores, Department Stores, Discount Stores Keyword: Baby bathtub MOQ: 100 pcs Packing:

Angle Thermostatic Radiator Valve / Angle PX-B Thermostatic Radiator Valve / Straight Thermostatic Radiator Valve ** / Body : Brass (CW617N) / Body Type : Angle & Straight Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems

Straight Radiator Valve / Straight Return Radiator Valve / Straight PX-B Radiator Valve / Straight PX-B Return Radiator Valve ** / Body : Brass (CW617N) / Body Type : Straight Type / Handwhell : Ebonite - Plastic (ABS) / Gasket : No, Optional / Max. Working Temp. : 120 ºC / Max. Working Pressure : 10 Bar *** Application Areas : Hot and Cold Water Systems

The FLEXON maxxTop product range offers both stainless steel and plastic flat top chains. The range also includes conveyor chains made of cast iron and plastic, as well as straight running and sideflexing plate top conveyor chains. FLEXON stainless steel and plastic flat top chains are available as straight running or sideflexing versions, in a variety of materials, widths and plate thicknesses. Featuring low friction values, high resistance to wear, good noise damping, high-quality workmanship and surface finishes, they are widely used in the beverage industry and beyond. iwis Stainless steel flat top chains made of hardened material, which offers excellent tensile strength, corrosion and abrasion resistance. Highlights: - Increased wear resistance - Corrosion-proof - Better wear and corrosion properties when compared to carbon steel equivalent - Available in most standard sizes