Storage costs - Import export

RUF briquettes have good density index due to 250 bar pressure during the production. This type has rectangular monolithic shape that has perfect moisture and mechanic resistance during transportation and storage. Also it optimizes transportation and storage costs. RUF briquettes provide good heating value with moderate extension.

This ultra-light, ergonomic, half-euro size nestable pallet has 6 feet and is sustainable and export friendly. Ideal for one way use and due to its nesting ratio very cost efficient in storage and transport.

LIPP® Gas Accumulators were developed as a system for the nonpressurised storage of dry gas which has been used for over 300 projects worldwide over the past years or more. Sizes from 30 to 5000 m³ are available according to the gas yield in each case. The gas accumulator consists of two parts a bubbleshaped storage balloon and a steel container to protect the balloon against mechanical damage and the effects of weathering. Speciality Accurate level measure of stored gas. In biological processes, gas production is not continuous. That is why the utilisation of gas (e.g. in a combined heat and power plant) requires an accumulator in order to compensate for fluctuations during gas production and to bridge downtimes for plant repairs and maintenance. Besides high functional and operating safety, other important criteria for the construction and operation of gas tanks include the economic aspects of investment and maintenance costs.

Between the shelves of the high-bay storage are corridors in which the TWS function. They are controlled through the lane with the assistance of the TWL in order to load and retrieve products or load carriers at different levels. A combination which, through automation, utilizes maximum storage capacity, sustainably saves costs, avoids fault sources and enables an efficient working method.

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

• Mold measurements up to 4 x 2 x 1 m • Does away with elaborate and expensive mold set-ups • Short throughput time (a few days) • Sand molds correspond 1:1 with CAD model • Structures can be designed in accordance with requirements, without having to watch for draft angles or undercuts • Special sands prevent casting problems • Surface quality can be adjusted through use of different sands • Coarse-grained sands for high gas permeability • Considerable flexibility with changes in geometry, without additional expenses • No storage or maintenance of patterns • Cost savings particularly for complex molds and batch sizes of 1 to several hundred pieces

The Combination Slitting & Cut-To-Length Lines are probably the most flexible coil processing lines within the field of cutting. By combining the cutting lengthwise and across, the coil material can be processed into a variety of blanks. So, if your production features a limited number of different coils as basic materials, while the variety of widths and lengths of the blanks is high, a Combination Slitting & Cut-To-Length Line will be the right choice. The system bases on the Cut-To-Length technology while offering the additional functionality of slitting. Since the slitting technology is home-made too, we can provide a fully integrated solution. An incisive experience so to speak. As a sizable advantage, storage space and material costs per ton are both significantly reduced, and with Combination Slitting & Cut-To-Length Lines even smallest batches can be delivered immediately.

Lipp offers liquid manure containers for farms of any size that not only make promises to provide safe and cost efficient storage but also keep those promises. Stainless steel may be the material of choice for constructing liquid manure containers but steel is expensive – and that is why Lipp uses Verinox, the material that it developed in house. A combination of galvanised steel sheet (for the outside of the container) and stainless steel sheet (for the inside of the container), Verinox offers all the benefits of a high quality material while enabling significant cost savings to be made at the same time. KEY BENEFITS Can be tailored to the customer’s requirements Steplessly variable in diameter and height On site production Construction without the need for container boarding or scaffolding Suitable for expansion High quality and a long service life Wide range of peripheral accessories Consistent quality worldwide

The PolyGrip® blind rivet nuts Die PolyGrip® blind rivet nuts are the logical further development of many years of experience with our PolyGrip® multi-range blind rivets. Thanks to the benefi ts of its large drilling hole tolerance and the option of covering various grip ranges with just one fastener, the PolyGrip® blind rivet nut has become a fi rst-choice connector in many industrial applications and in trade. PolyGrip® blind rivet nuts – The GESIPA® blind rivet nuts with large grip range Bringing together multiple dimensions saves handling and storage costs while also permanently reducing the risk of confusion in the workplace and the quality problems this can result in. Large grip range: Ideally, the one PolyGrip® blind rivet nut can replace up to fi ve different dimensions of DIN standard blind rivet nuts thanks to the large grip range.

Washer-shaped locking head This valuable locking head shape distributes the contact pressure evenly over the component, making it the perfect fastener for riveting soft and brittle components such as plastics and composites. Large clamping range One PolyBulb® blind rivet replaces up to three conventional blind rivets and reduces part variety. Combining multiple dimensions saves handling and storage costs and also permanently reduces the risk of confusion in the workplace. Controlled hole reveal By filling the hole according to the requirements, the PolyBulb® blind rivet creates an optimal connection. Customer benefits: • Washer-shaped blind head formation with large blind head diameter. • Aesthetic setting pattern, only one pronounced closing head • High tensile strength and unbonding force • Locked residual rivet mandrel • Rattle-free application • Process controllable

Ladder Cable Tray - Foldable Cable Ladder SystemE-Line KM pre-galvanized foldable cable ladders are manufactured with a directional folding system. Due to this feature, they take up less space than the E-Line KC series cable ladders therefore reduces shipment and storage costs.

We have a storage capacity of several thousand square metres available. This is partly used for the temporary storage of current orders. Moreover, we are pleased to offer our customers storage space, for example, as reserve storage, at a reasonable rate. This means potential high storage costs can be saved

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.

Flexible indoor silo made of breathable, uncoated polyester fabric for a constant feed quality without the formation of mould and lumps. The lowest-cost storage possibility with an optimal space utilisation.