Steppers - Import export

PSD 49 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.

PSD 41 direct drive is a mechatronic system with integrated control, bus interface and absolute measurement system without battery. This drive is ideal for automatic format changeover. The stepper motor with integrated control and bus communication permits higher velocities at lower torques. The PSD can be easily addressed by rotary switches (not for IO-Link). The instruments can be mounted on a spindle using the hollow shaft without the need for an additional coupling. The optional rotatable attachment housing allows you to attach the direct drives to the machine in any position, no angle plugs are required.

Versatile choice due to the high torque and speed. This motor is the best choice for most applications with medium loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The connector interface provides a high IP65 protection level (IP: International Protection). The higher the IP rating, the better the motor is protected from the ingress of dirt and water. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

This little motor has impressive torque and high RPMs. Reliable operation with quick movements of low loads. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, their precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. Motors with stranded wires are the least expensive and the most common stepper motors. The connecting wires for this type exit from the housing and will be connected with a JST connector. They are usually installed in machines and equipment that have an additional housing or are used in clean environments.

For designs that require a stepper motor with directly integrated lead screw, drylin® E offers the ideal solution. The stand-alone versions with NEMA11 stepper motor (very small type) are available in a compact type with or without encoder. The lead screw is centred and in combination with the dryspin® high helix thread technology, the system has a long service life. Stepper motors from igus® are a good supplement to drylin® linear axes. They are characterised by their cost-effectiveness, precision and easy control. They work reliably under the most varied environmental conditions (depending on the selected class of protection IP). The igus® stepper motors can be connected to the most common motor controls using standardised electrical connection. The encoder sends signals from the motor to the motor control. The encoder verifies that the required linear motion has occurred precisely as required. Encoder = increased machine accuracy.

drylin® SAW-1040 linear module, drylin® W aluminium profile, surface: hard-anodised, Trapezoidal lead screw TR10x2, machined lead screw end 69x15mm, guide carriage, aluminium shaft end support. Stroke length: 500mm, carriage length: 69mm, NEMA23 stepper motor with JST connector. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with integrated positioning control. Note: Stepper motor with integrated positioning control. It forms a convenient unit consisting of stepper motor and intelligent controller. Reference travel is possible on a block with reduced electric current without proximity switch. Integrated rotational monitoring. Smooth running through dynamic switching of increment trip. Actuation via single I/O interface, 31 position configurations and call-ups. Control unit can be parametrised quickly and conveniently with the software. The software and manual for programming the positioning control are available as free download. When selecting a suitable motor, using just the retaining torque is not enough, as the motor’s torque decreases with the speed. It is therefore essential to select the correct motor according to the torque curve.

new design for solar thermal tower power station and high concentrated PV. To meet the mirror panel drive performance, such as the rigidity, position precision, the inside limit switch is developed by POWER JACK MOTION in the patent. It can help customer adjust the angle following customer’s solar tracker. All metal structure design can meet the harshest environments.

Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel drylin® E data sheet - Gearbox for stepper motors GEA-60-..._EN.pdf Planetary gears for igus® stepper motors NEMA 23, 23XL & 34 Increased motor torque Increased brake holding torque 2 installation sizes Reduction gearing of 3 & 5 available Typical applications:Packaging technology, general mechanical engineering, inspection technology/ camera travel

drylin® ZLW-0630 basic toothed belt axis, basic version, feed rate 54mm/rev, aluminium profile, surface: hard-anodised, neoprene toothed belt in black, guide carriage length 60mm, shaft end support made of aluminium, alignment of drive pin on the right, stepper motor with stranded wire. Configure drylin SHT linear modules individually here: https://igus.eu/ddx

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control - Connect, select, control... Precise positioning, endless movements, continuous end-to-end movements - simply defined with the new control for drylin® E linear systems from igus®. - No software or app installation necessary - Quick commissioning - Compatible with numerous industrial controls (e.g. Siemens S7 / Beckhoff) - For stepper motors - Cost-effective

dryve motor control system - select, click, control... Travel distances, positions, speeds, operating times - easily defined with the new igus® web-based control system for drylin® E linear systems. - No software or app installation necessary, fast commissioning - Control possible via smartphone (browser), tablet or laptop - Simple and intuitive user interface, control system set up in just a few minutes - Compatible with numerous industrial controllers (e.g. Siemens S7/Beckhoff) - For DC, EC and stepper motors - Cost-effective

Planetary gearing for stepper motors of the NEMA 23 and NEMA 34 size. Suitable for all mounting positions. Maintenancefree thanks to lifetime lubrication. The planetary gearing is selfcentring, equipped with a flange adapter system and axial length compensation.

Bearing block and carriage aluminium alloy. Guide column and threaded spindle stainless steel. Plain bearing for guide columns and spindle nut highquality special plastic. Claw coupling aluminium with polyurethane coupling spider. Version Aluminium alloy anodised. Stainless steel hardened and ground. Threaded spindle with ball bearing. Note for ordering The unit is supplied with the position of cable outlet or control unit as shown in the drawing. Note Positioning stages for motorised adjustment and positioning tasks. The plain bearings and spindle nuts are suitable for dry running, however lubrication with a grease for plastic plain bearings is recommended. The suitable programming software and interface cable for the stepper motor with positioning control are available as accessories (2500015).

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

The compact MEMDOS SMART LP stepper motor pump combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. This pump is available in five performance ranges, making it suitable for different applications. The drive of the MEMDOS SMART LP is fully controllable, which allows the stroke frequency to be continuously adjusted and thus ensures precise dosing. The ability to integrate the pump into sophisticated automation networks is particularly noteworthy. A version with an Ethernet-based MODBUS interface is available for this purpose, allowing seamless communication and control within modern industrial systems.

The diaphragm dosing pumps in the MEMDOS MR series have been developed for a wide range of applications in dosing technology. They are ideal for use in industry, process engineering, water treatment and waste water treatment. Features: . Robust dosing head: Made of PP and stainless steel for high durability and longevity. . Precise dosing: Double ball valves (up to MR 290) and spring-loaded flat-seat valves (from MR 290), optional spring-loaded single ball valves. . Safety: Separation chamber with drainage tube between dosing head and gearbox protects against leaks. . Flexible stroke adjustment: Can be adjusted manually or electrically (ATE). Optional extensions: . Dual dosing pumps for increased performance. . Stroke counting with inductive sensor for precise batch processes. . Frequency inverter control for variable control.

The MEMDOS SMART LB stepper motor pump impresses with its compact design and intelligent drive concept. This pump combines the space advantages of a solenoid diaphragm dosing pump with the high precision of a motorised diaphragm dosing pump. The MEMDOS SMART LB series is available in five different performance ranges to meet the most diverse requirements. Its drive is fully adjustable, which enables flexible adjustment of the dosing capacity. The stroke frequency can be adjusted manually and continuously from 0 to 100 %, ensuring precise control and customisation for specific applications. This combination of compactness, precision and adaptability makes the MEMDOS SMART LB the ideal solution for numerous dosing tasks. The value of the maximum delivery rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

The compact MEMDOS SMART LK stepper motor pump combines the size advantages of a solenoid diaphragm dosing pump with the precision of a motorised diaphragm dosing pump. This versatile pump is available in five different performance ranges, making it suitable for a wide range of industrial applications. The fully variable drive of the MEMDOS SMART LK enables infinitely variable adjustment of the stroke frequency, ensuring precise control of the dosing performance. An outstanding feature of the MEMDOS SMART LK is the ability to reduce the suction speed in two stages. This function makes dosing viscous media considerably easier and increases the precision of the dosing.

The MEMDOS LP motor-driven diaphragm dosing pump is the ideal choice for applications where the pump needs to be integrated into control systems or control loops. A version with an Ethernet-based MODBUS interface is available specifically for integration into sophisticated automation networks, enabling seamless communication and control. Equipped with a robust plunger drive and the option of manual or automatic capacity adjustment, the MEMDOS LP reliably and precisely doses various media such as acids, alkalis, precipitants and flocculants. This flexibility and precision make it a reliable component in various industrial processes. The MEMDOS LP is also available with a double diaphragm system on request, which ensures increased safety and reliability.

The motorised diaphragm dosing pump MEMDOS LA sets new standards with its robust and sophisticated drive concept as well as its ease of operation. The MEMDOS LA series is available in two sizes and covers a wide performance range from 4 to 1020 litres per hour. Thanks to the robust tappet drive and the option of manual or automatic capacity adjustment via external current signals, the MEMDOS LA reliably and precisely doses various media such as acids, alkalis, precipitants and flocculants. This pump is ideal for applications where high precision and reliability are required. The MEMDOS LA offers a flexible and powerful solution for a wide range of dosing requirements and is characterised by its durability and ease of use.

Thanks to the robust steel frame, our T-Rex CNC mill enables you to produce precisely, quickly and cleanly. Even with workpieces made of hard material, you will achieve ideal results, thanks to the high stability of the CNC machine, which is guaranteed by the robust construction. On this machine, you can even process thicker plate material, as the clearance height of the Z-axis is 200 mm. Versatile application possibilities: drilling, cutting or engraving in different materials such as plastic, wood, granite, marble, stone and metal can be done with high accuracy. Basic equipment: > vacuum table with several zones > manual central lubrication > KinetiC-NC control software > ergonomic control panel with integrated CNC control > full version of the design software ConstruCAM-3D > Estlcam software CE-compliant commissioning of our CNC machines requires the attachment of the protective housing and the exhaust connection.

SLA500 is new design for solar thermal tower power station and high concentrated PV. To meet the mirror panel drive performance, such as the rigidity, position precision, the inside limit switch is develop by POWER JACK MOTION in patent. It can help customer adjust the angle following customer’s solar tracker. All metal structure design can meet the harshest environments. Details Data: Motor Voltage: 24V DC (stepper motor) Max Load: 5500 N Max Static Load: 10000N Max Overturning Moment: TK more than 5N.M Axial Rigidity: 2000N Standard Stroke: From 100mm to 1000mm Speed Range: 1.2mm/s Transmission Precision: less than 0.35mm Reset Precision: less than 0.2mm Transmission Efficiency: More than 60% (ball screw type) Corrosion Protection: Salt spray test more than 480 hours Protection Class: IP65 Mechanical Life: More than 20 years Sensor Type: Hall Sensor

Following different solar tracker size,select the suitable gear motor for your solar tracking systems.High precision.High torque output.Low speed.The Maximum extreme torque could be 1300 N.m.The rated torque is from 30 N.m to 600 N.m.Low cost selection and perfect motion control design for kinds of solar tracking systems.

Bike and Stepper Equipment / EKS-02 Bike and Stepper Equipment has two different functions, runs the legs, hips front and aft muscles, upper back side, waist muscles and supply higher blood circulation, thus muscles have more oxygen. Outdoor fitness equipment is produced in accordance with EN 16630 safety standards. It is resistant to outdoor use conditions. Please read the instructions on it before using the park sports equipment. Use it if you think it is a suitable sports equipment for you.

The SMD‑4.2DIN ver.2 driver is designed to control two and four-phase hybrid stepper motors with a phase current of up to 4.2A. The unit provides for mounting on a DIN rail, which is convenient for placing it in a production environment. Due to its advanced design, the SMD‑4.2DIN ver.2 delivers dynamics that accelerate the stepper motor to over 1000 rpm in a fraction of a second and easily reach operating speeds of over 4000 rpm while maintaining enough torque to perform useful work For stepper motor operation with high inertia load, a connector is provided for connecting an external braking resistor. The SMD‑4.2DIN ver.2 driver provides both pulse position control and analog speed or angle control. Microstepping mode - 1, 1/2, 1/4,1/8, 1/16, 1/32, 1/64, 1/128 Control methods: - Pulse position control (STEP/DIR) - Analog speed control (0 ‑ 5 VDC or potentiometer) - Analog control of rotation angle - tracking mode (0 ‑ 5 VDC or potentiometer) - Constant speed rotation

SMD-2.8DIN is stepper driver for small and medium size stepper motors with current per phase up to 2.8A. Driver provide smooth operation, maximum microstepping division is 1/256. Standard logic signals STEP and DIR are used for motion control. Enable signal is also provided and it can be inverted if it is required by a system. Driver SMD-2.8DIN operate with external logic signals source – frequency generator, PLC and etc. The drivers are designed on a modern element base with the use of new engineering solutions, which allow to achieve high speeds while maintaining useful torque. The microstepping division up to 1/256 provides exceptional smoothness and accuracy of positioning, and the output signal FAULT allows monitoring emergency situations that can arise during operation. Additionally, SMD-2.8DIN have the STO function (Safe Torque Off) - which provides motor phases deenergizing in case of any alarm situation.

Programmable stepper motor controller SMSD‑4.2RS is a modified and updated version of previous old models SMSD‑4.2RS-232 and SMSD‑4.2RS‑485. SMSD‑4.2RS provides both communication interfaces RS‑232 and RS‑485. Update frame is designed to be mounted on a standard DIN rail. Programmable controller SMSD‑4.2RS is intended for control of step motors with phase current up 4.2 A. The controller allows to control (adjust) direction, speed and acceleration of motor, can be programmed and operate as a standalone unit or can be controlled by an external device (PC, PLC). Microstepping mode: 1, 1/2, 1/4, 1/16