• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • steel girders

Results for

Steel girders - Import export

Austria

Verified by Europages

BVHS-GD 400 STEEL GALVANISED BVEHS-GD 400 STAINLESS STEEL Load Capacity: 400 kN test load (EN 124) when filled with a min. 5 cm layer of grade C35/45 concrete (EN 206). Material: Frame and cover in 2 mm cold-formed precision steel profiles. Underside of cover reinforced with steel girder. The frame is reinforced with an additional frame. Hot-dip galvanised. Or grade 304 stainless steel. High-load hinges. High-specification double-piston gas struts. EPDM seal. Robust steel mesh reinforcement. Features: Comfort-lift access cover. Cover with 10 cm deep recess. With peripheral EPDM seal, smell proof and largely water-tight (not guaran- teed to be completely water-tight). Opening tools included. Opening is assisted by the patented double-piston gas struts to such an extent that the cover can be opened and closed by one person. Safety device fitted to prevent the open cover from closing. The access cover has a water drain nozzle. There is the option (if required) to connect a drain...

Request for a quote

Austria

Verified by Europages

Load capacity: 250 kN test load EN 124 when completely filled with concrete C 35/45 (EN 206). Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy duty sealed cover. Underside of cover reinforced with steel I-beam section. Robust steel mesh reinforcement. EPDM seal. Tapered design allows easy opening. The Lift-Off opening system: Every HAGODECK Type BVS-250 steel cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For vehicle traffic areas in industrial buildings and their surrounding areas, where the cover needs to be heavy duty. Installation: Installation must be carried out according to our instructions. With watertight models, care must be taken to seal the outer frame into the surrounding flooring. Cover depth ≈ 5.0 cm Installation height ≈ 7.5 cm Steel girders penetrate ≈ 10 cm into the shaft Special sizes possible *S =...

Request for a quote

Austria

Verified by Europages

Load capacity: 250 kN or 400 kN test load (EN 124) when filled with a min. 5 cm concrete. Material: Frame and cover made of steel plate, hot-dip galvanised. Features: Heavy-duty sealed cover with 10 cm deep recess. Underside of cover reinforced with steel girders. In Type BVHS 400, the frame is reinforced with an additional frame. EPDM seal. Robust steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVHS cover comes with a set of lifting keys and precise installation instructions. The HAGO advantage: jammed covers are released by simply turning the Golden Key. Applications: For use in vehicle traffic areas in industrial buildings and areas surrounding buildings or for secondary traffic areas (pedestrian zones). Especially for those installations where the cover is to be filled with concrete slabs, bricks, paviors etc. Installation: Installation must be carried out according to our instructions. With water-tight models, care must be taken to seal the...

Request for a quote

Germany

Verified by Europages

Existing factory workshops and industrial plants can be surveyed three-dimensionally in detail. For new buildings, further extensions and reconstruction in the future, there are spatial coordinates available which are accurate to a millimeter, from which two-dimensional construction plans can easily be drawn. Generation of 3D models From the data gathered by Z+F laser scanner systems and with the LFM software, 3D models of the actual state of the factory or plant (e.g. tubes, steel girders) can be generated. Furthermore, it is possible to generate complete CAD models from the 3D scan data (the so-called point cloud). Clash detection It is possible to simulate manufacturing processes and to carry out collision checks with 3D models. Example: Another production robot of the same type has to be added to an existing plant. Facility management All fixed equipment like cables or tubes is surveyed as well and saved in a 3D database which serves as the basis for future reconstruction.

Request for a quote

Germany

Verified by Europages

EGE infrared detectors are used to detect hot objects and to record and measure temperatures. The sensors detect the infrared radiation of warm and hot objects from 20° C to 800 ° C. EGE infrared detectors are designed for use under extreme conditions. With their glass and stainless steel housing they are water-tight according to IP 68 / IP 69. With attachment optics can be used at an ambient temperature up to 500° C. An optional blow-out system makes the sensors insensitive to contamination of the optics. The detectors are, for example, used to detect steel girders or hot rolled wire as well as for the contactless temperature control of brewer’s barley in germination tanks.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

The Platform Truck SFB is a freely manoeuvrable, self-propelled electric vehicle for the in-plant transport of all sorts of heavy loads such as: metal sheets, steel girders, coils, machine parts, cast iron and tools. Due to its modular design, this self-propelled vehicle can be customized to suit various customer-specific requirements. load capacities up to 63t can be used as an all-purpose vehicle indoor and outdoor application cable remote control battery powered electric drive (80V) maintenance-free AC drive technology robust design single-axle, all-wheel and multidirectional steering Options: proportional steering radio remote control cabin or driver's station solid rubber tires for driving over asphalt lighting / LED side lighting loading platform according to customer specification safety devices according to customer specification automatization to a driverless transport system, with partners hydraulic lifting device further options available upon request

Request for a quote

Germany

Use this temporary anchorage device as a mobile anchor solution. In just a few seconds, the brass clamps of this anchor, which to a large part is manufactured from aluminium, can be clamped to a steel girder. This device, which only weighs 1.85 kg, protects 1 individual from falling. EN 795:2012, B Simply clamped to a steel girder Flange width: 100 - 330 mm Flange depth: max. 33 mm

Request for a quote

Germany

This stainless steel anchorage point - designed to protect 3 individuals from falling - is simply clamped onto the flange of a steel girder without penetrating the surface. It is suitable for all directions of load, can be installed overhead or used as an intermediate bracket in a lifeline system. EN 795:2012, B & DIN CEN/TS 16415:2013 (ABS-Lock T) EN 795:2012, B & DIN CEN/TS 16415:2017 (ABS-Lock T-Max) Simply clamp the device onto a steel girder Flange width: 80-320 mm Flange depth: 8-16 mm Optional: ABS-Lock T-Max for extra-large steel girders (flange width: 270-1370 mm / flange depth: 5-30 mm)

Request for a quote

Germany

This stainless steel anchorage point (Ø 16 mm), which has been awarded national technical approval, comes with its own base and counter plates (each measuring 200 x 200 mm). Simply attach it to a girder measuring max. 150 mm. Custom sizes are available upon request. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 Clamped onto a steel beam using a base and counter plate Upgrade with a supporting tube for usage as an end or corner post in a lifeline system Incl. stainless steel installation set Available for other girder sizes upon request

Request for a quote

Germany

When installed on a steel girder (flange depth 6-26 mm) and accordingly countered, this stainless steel anchor offers workers at heights a freely rotating anchorage eyelet. Simply insert the anchorage point, which is suitable for all directions of load, through a pre-drilled hole and counter using the nut supplied. National technical approval ("abZ"): Z-14.9-688 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, A + CEN/TS 16415:2013 EN 50308:2004 (max. 2 persons) GL-certified 360° rotating eyelet Installation materials included Not suitable for recurrent abseiling usage when installed overhead!

Request for a quote

Luxembourg

ABES Bench 143-2 is a park bench with back rest, consisting of two perpendicular side parts made from steel profiles, which hold five wooden slats. Back rest consisting of three wooden slats connected to steel girders. Mounting For screw fixing (at +/- 0 mm) or concrete embedment (floor recess 400 mm). Finish – Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats made from hardwood. – The following changes are possible for an extra price: colour, length and wooden surface. ABES Bench 143-2 overview: Park bench with back rest – Base: Hot-dip galvanised steel ST37, powder coating in standard RAL colours or DB 703. – Seating slats/Back rest: Hardwood. – Measurements (W x H above ground x D in mm): 610/1890/1590 x 453/823 x 444/ 544. – Bench is delivered unassembled.

Request for a quote

Germany

Angled Plastic Adapter RSMP15 with 12.7 mm mini prism RSMP15 with 12.7 mm mini prism sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. When using robotic total stations: permanent settling measurements can be carried out during the building work settling measurements are possible on railway tracks while under the load of rail traffic bridges and other structures can be monitored even more quickly and precisely PLEASE NOTE: At BAUTEC in Berlin, we will be presenting a new prototype with a 180° pivotable mini prism that is close-to-production. Come and visit us in Berlin in hall 21.A / 117. We look forward to seeing you!

Request for a quote

Germany

Twistable Mini-prism RSMP180 and RSMP280 Twistable, Extensible, Plastic Housing System With 12.7 and 17.5 mm Prisms RSMP180 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. or can be attached using plugs and screws. When using tachymeters and robotic total stations the prism can always be aligned accurately with the measuring instrument the prism can be turned in a radius of 180° making it possible to use the same survey point from different directions bridges, façades and many other structures can be monitored even more quickly and precisely several prisms can be combined with each other due to the integrated connector system, making it possible to survey from different directions without having to turn the prism – see examples When using robotic total stations permanent settling measurements can be carried out during the building work settling measurements are possible on ra

Request for a quote

Germany

RS193 housing with 30 x 30 mm reflective target rotatable and swivellable through 360°! RS193 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, gas and oil pipelines, etc. or can be attached using plugs and screws. For easy installation on steel structures, a magnetic version of the base plates is also available. The following accessories are available for this product (see right): Resumption points (item RSFP-X90) Magnetic or non-magnetic protective cap (RSPC10 and RSPC10M) When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 360° making it possible to use the same survey point from all directions when using fixed point RSFP-X90, the targets can be removed and later replaced on the same survey point when using protective cap RSPC10 and RSPC10M, the reflective targets can be protec

Request for a quote

Germany

RS183 Plastic housing with 30 x 30 mm reflective target can be rotated through 180° and combined with other RS183! RS183 sticks quickly and easily even to difficult surfaces, e.g. glass and marble façades, historic buildings, steel girders, rails, gas and oil pipelines, etc. or can be attached using plugs and screws.. When using tachymeters and robotic total stations the reflective target can always be aligned accurately with the measuring instrument the reflective target can be turned in a radius of 180° making it possible to use the same survey point from different directions several reflective targets can be combined with each other due to the integrated connector system, making it possible to survey from different directions without having to turn the target – see examples

Request for a quote
Filters

Results for

Steel girders - Import export

Number of results

16 Products