Steel fibre - Import export

Steel structure production, construction, project management & consulting

steel fibers with hooken end for reinforced concrete 1/50 (0.9/60) mm EN 14889-1 with hooken end in cartoon box 25 kg. One truck 21,350 ton net (22,250)

Steel fibers are used to strengthen the foundation and concrete structures in construction.

DryLin® R - Installation videos System selection & service life calculation DryLin® R - Introduction and technical information Special info on DryLin® R linear plain bearing L1 series drylin® igus® test method Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little installation space is available drylin® N drylin® W When twist-protection is required for single-axis systems DryLin® T DryLin® N Liners and pressfit bearings Open and enclosed DryLin® R liners Linear Bearings Open, enclosed, split and self-aligning DryLin® R linear plain bearing Housing bearing Enclosed linear bearing, adjustable, split, in tandem design and as floating bearing DryLin® R housing bearing Flange housing Linear bearing with round or angular flange DryLin® R flange housing Carriage and linear housing Open or enclosed in several long designs DryLin® R carriage and linear housing Shaft end supports and shaft blocks Fixed and moving shaft end supports, shaft blocks in several designs DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts

Specifications: 1. Type: construction building 2. Wide span: single span or multiple spans, the max span clear distance is 36m, without middle column 3. Roof and wall option: steel sheet,EPS, fiber glass, rock wool or PU sandwich panel 4. Door and window PVC or aluminum alloy: sliding door or rolled door 5. Column and beam option: hot rolled or welded H section, I section; painting or galvanized 6. Purlin option: C-section or Z-section 7. Local climate: wind speed,snow load,rain quantity,earthquake grade 8. Usage: for the broiler 9. Drawing: according to clients' drawing,design as per clients' dimension and requests 10. Package: naked loaded in shipping container or as per requests. 11. Equipment: according to the requirements of the customers Advantages (1). Free to design architectural drawings for you; (2). Features: Fast and flexible to assemble, safe, thermal and noise insulation, water proof and fire prevention; (3).

Material: low carbon steel We produce our corrugated STAX segment wire steel fibers in the lengths of 50 mm and 34 mm. Application for our STAX segment wire steel fibers you find in industrial concrete floors and plates.

Material: low carbon steel We offer our STAX steel fibers as short fiber according to customer specification (on special request as well as strand on reels). The Ø-fiber strength is approx. 30-50 μm. Regular analyses in our laboratory ensure the quality of our products. Main area of application for our STAX steel fibers is friction material for brakes and clutches, and as concrete reinforcement or in plastic compounds. Further we produce segment wire steel fibers for reinforcement of conrete floors for example.

Material: 1.4113 (X6CrMo17-1) AISI 434 Properties: heat-, corrosion- and acid-resistant, magnetizable We produce our STAX stainless steel fibers 1.4113 in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm, fine 60 μm and on demand extra fine 30 μm. STAX Edelstahlfasern 1.4113 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter Applications for STAX stainless steel fibers 1.4113 are for friction material as in brakes pads, further as filter material or special round filters (as well in half-round version, see photo), sound damping or -insulation. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

Material: 1.4841 (X15CrNiSi25-20) AISI 314 Properties: highly heat-resistant, corrosion- and acid-resistant, not magnetizable, austenitic. In-house developed production equipment allowos us to produce fibers of this material in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and on demand fine 60 μm. STAX stianless steel fibers 1.4841 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter STAX stainless steel fibers 1.4841 find application in the automotive area, as filter material, sound damping and -insulation as well as in many other areas with high demand to heat-resistance. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

A dexterous high cut resistance glove, glass and steel fibre free. Ideal in dry or greasy conditions.

A dexterous high cut resistance glove, glass and steel fibre free. Ideal in dry or greasy conditions.

A lightweight glass and steel fibre free medium cut resistance glove with polyurethane coating. Ideal for handling sharp parts in dry or greasy conditions.

A lightweight glass and steel fibre free medium cut resistance glove with polyurethane coating. Ideal for handling sharp parts in dry or greasy conditions.

Fieldbus Profile AG06 Fieldbus: easy mounting, no additional coupling needed stainless steel hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

We offer antistatic brushes with carbon fibre or stainless steel yarn. The stainless steel yarn consists of stainless chrome-nickel-molybdenum steel. The fine stainless steel filaments are twisted to a yarn. This yarn has high resistance to abrasion, even when subjected to continuous mechanical load. The standard type AB10 is available from stock. Carbon fibres are excellent conductors, thanks to the high proportion of carbon which they contain. The variable distance between the tufts make carbon-fibre strip brushes the ideal choice for difficult static removal applications. The excellent conductivity of these brushes can also be used to allow voltages to be applied to the surface of workpieces. The standard type AB20 is available from stock.

Compact and powerful actuator for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Framework galvanized bolted steel. Wall / Facade Structure made of galvanized steel, cladding of nonflammable Plasterboard A1. Cladding of concrete fiber panels (natural, rock and wood appearance). Roof Panel and galvanized steel roofs, a wide selection of roof coating (galvanized and painted trapezoidal sheet or sandwich panel coating with polyurethane insulation, or tarred corrugated plates). Metallic or Pvc rain gutters and drainage pipes. Insulation Rock wool or glass fiber Door exterior (Steel, aluminum, Pvc, fireresistant doors, antiintruders protection); interior( Mdf, Aluminium, Pvc, fireresistant doors) Windows Doubleglass with Pvc or aluminum frame, doublepanel windows, sliding or guillotinestyle. Parasol, rolling shutter in Pvc, steel antiintrusion protection. Painting Exterior in silicone or epoxy. Interior polyurethane. Electrical system lighting structures, sockets and switches, cables, fuses and fuse boxes, relays.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

Durus S500 is proving increasingly popular with designers, contractors and project owners. This synthetic macro-fibre has shown to be a valid alternative to conventional steel fibre reinforcement. With no need to change existing designs, a concrete mix using steel fibres can be replaced by a mix containing Durus S500 macro fibres. The workability will remain unchanged and often even be improved. Typical applications include the production of concrete tunnel segments and other precast concrete elements. The use of Durus S500 instead of steel fibres eliminates any risk of injuries to manufacturing operatives during dosing, de-moulding and handling of precast elements. Compliance with health & safety requirements during the production process and on the construction site are thus greatly improved.

The bristles are made of coconut fibers on a steel handle. The brush can be used to clean drinking straws, it can be used to easily clean various narrow spaces or objects. Made of materials - steel body and natural coconut bristles. Designed for repeated use. When worn, the bristles can be removed with tweezers and composted. Recycle the steel handle by placing it in a metal collection container, or otherwise use it. - Length 20 cm. - Packaging: 1 pc. - Distributor: Eco Status Cleaning brush made of coconut fibers. Designed for cleaning small and narrow objects and spaces, for example straws or the sink drain. Its multi-purpose use is left to your imagination.

Load cells specially designed to measure the tension force applied to a running cable or running rope. o Custommade design according to your needs type of rope (steel, synthetic, optical fiber, umbilical) capacity rope diameter (from 6 up to 115 mm) maximum winding speed accuracy Material load pin stainless steel other nickelplated steel or stainless steel (option) o Complete range of CE certified electronics and load limitation devices available

Standard power, size and shape or as indicated by the customer. Stainless steel casing. TYPE CERAMIC FIBRE: WORKING TEMPERATURE: MAX 850°C Armour in stainless steel or ALUSI sheets Internal insulation in ceramic fibre. Resistive wire* internal insulating TYPE MICANITE: WORKING TEMPERATURE: MAX 280°C Armour in stainless steel or ALUSI sheets Internal insulation in micanite Resistive wire* internal insulating ARMOURED TYPE: WORKING TEMPERATURE: MAX 700°C Armour in stainless steel Heater*, consisting of a ARMOURED heating element with stainless steel tube. Element development up to 8.00 m. Resistive internal filament* insulated with first choice MAGNESIUM OXIDE.

Carbon dioxide detection in industrial plants: Measuring range 0 – 5 % or 0 – 2 % vol. For Martians – provided they exist – a carbon dioxide atmosphere might be their natural habitat. We earthlings can only tolerate low concentrations of this gas. It is true that we are using the special properties of CO 2 for many purposes, but in concentrations above 5000 ppm it can be hazardous to our health. Therefore it must be monitored. In areas that are rarely accessed, such as beverage dispensing facilities, a leak detector might do as a warning device. Wherever people are present, such as workplaces in plants, industrial grade gas detection equipment is required. Here it is: Statox 501 IR. This new version of the field proven Statox 501 IR for combustible gases operates as a 4 – 20 mA transmitter. It can be connected directly to a recording device, process control system, or the optional Statox 501 controller. Its unmatched compact design makes it operable in any environment whether it is food industry, chemical industry, refineries, or cleaning facilities. This explosion proof instrument will do the job everywhere. It is water proof (rated IP 67). The housing materials (stainless steel and fiber-reenforced polyamide) are rugged and easy to clean.

RAILFOOT CABLE, LOOSE TUBE CONSTRUCTION, METAL-FREE, WATERTIGHT, RODENT PROTECTION, ALUMINIUM-PE-COMPOSITE-LAYER SHEATH, STEEL WIRE ARMOURING The fiber-optic railfoot cable is designed for use in telecommunication systems. It can be laid directly on the rail foot or other areas subjected to vibrations and impacts, but is also suitable for fixed laying in cable ducts, conduits or direct burial.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of 0.13" (3.3mm). • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Countersunk lid is secured with four M3 x 0.5 - 0.71" (18mm) long, Philips machine screws threaded into integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required. • Black with matte textured finish.

Product Features: • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a "Hand-Held" instrument enclosure. • Moulded from a compound of stainless steel fibers and flame retardant ABS plastic (material carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically designed to enhanced the aesthetics of the enclosure and provide the user with flexibility and assembly efficiency. • Designed to meet IP54. • Note: Material is brittle - acts like phenolic - Not for high impact use. • Lid is secured with Philips machine screws, threaded into tapped integral brass bushings. Perfect for applications with repetitive assembly and disassembly are required.

DP series doors are designed for positive temperature cold rooms, that maintain a temperature of 0°C or higher. Injected with 68 mm thickness polyurethane foam these doors can guarantee maximum thermal insulation and protection of premises. Standard door surface is made from a painted metal sheet and covered with polyester, but there are possibilities to use stainless steel or fiber glass for better durability. Special plastic profile frames help prevent cold leakage and ensure constant cold temperature preservation in the room. Doors are also equipped with a special micro-lift technology and an inside emergency lock.

DF series doors are the best option for a quality product at an affordable price. For this reason, this type of door is our best-seller. Standard door surface is made from a painted metal sheet and covered with polyester, but there are possibilities to use stainless steel or fiber glass for better durability. Many different frame types are available and can be made out of a special plastic profile or stainless steel. The doors are injected with 40 mm thickness polyurethane, using a special high-quality door blade filling technology. DF doors also have protective bumpers, specifically designed to withstand strong impacts. The hinges have a 90° fixation.

SDM series doors are designed for negative temperature cold rooms, that can maintain a temperature from 0°C to -40°C. Injected with 92-150 mm thickness polyurethane foam these doors can guarantee maximum thermal insulation and protection of premises. These doors have a parametric sealing gasket with a heating cable that protects the sash rubber from freezing at low temperatures. A special sliding mechanism, made of high-quality aluminum profiles, ensures smooth door movement and convenient access to the premises. Standard door surface is made from a painted metal sheet and covered with polyester, but there are possibilities to use stainless steel or fiber glass for better durability. Special plastic profile frames help prevent cold leakage and ensure constant cold temperature preservation in the room. Doors are also equipped with a special micro-lift technology and an inside emergency lock.