Results for
DIERMEIER ENERGIE GMBH
Germany
Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A
Request for a quoteDIERMEIER ENERGIE GMBH
Germany
Standard gear oil of so-called “moderate hypoid gear oils” for manual gearboxes, axle drives, transfer cases, overdrive gearboxes, overdrive clutches and steering systems. Application suitable for modern gearbox designs that do not require fully synthetic gearbox oil. Excellently suited for historic vehicles with manual gearboxes, also in conjunction with overdrive clutches, e.g. Laycock (note manufacturer's specifications). Specifications API GL-4 MB approval 235.1 ZF TE-ML 17A
Request for a quoteKAMAT GMBH & CO. KG
Germany
K25000-3G high-pressure triplex plunger pump for 24/7 operation, pipeline tensioning and leak testing of tanks and various pipelines. The K25000-3G is used internationally hundreds of times as a high-pressure pump in hydraulic face construction. With a power of 250 kW, a gearbox with forced lubrication and an optional oil cooler, the pump is perfectly suited to the demands of 24/7 mining operations. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod load - Dynamically balanced gearbox - Forced lubrication gearbox (> 160 kW with oil cooler) - Standard gear ratios i = 3.33 - 3.50 - 4.04 - 4.62 - 5.44 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request
Request for a quoteKAMAT GMBH & CO. KG
Germany
With 110 kW, the K11000-3G high-pressure pump is a powerful plunger pump that is mostly used in intermittent operation. The reason for this is that this KAMAT high pressure pump has splash lubrication and not oil pressure lubrication. This makes the pump more suitable for intermittent operation, but it is extremely robust and can therefore be used in continuous operation even at 110 kW. Classic applications for this pump are industrial cleaning, blasting and process engineering. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Splash lubricated gearbox - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76 - 4,13 - 4,50 - 4,93 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils etc. on request, oils etc. on request
Request for a quoteKAMAT GMBH & CO. KG
Germany
Working at high pressure and high volume flow with the KAMAT Triplex plunger pump K45000-3G: particularly suitable for pressure tests of containers, pipeline stressing and pipeline testing. The K45000-3G focuses on hydraulic applications and jetting. In jetting, the 450 kW high-pressure plunger pump is often installed in large mobile systems. The K45000-3G plunger pump is particularly suitable when high litre capacities are to be realised at high pressure. SPECIAL FEATURES - Flow rates with 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Forced lubrication gearbox with oil cooler - Standard gear ratios: i = 3.39 - 4.05 - 4.76 - 5.25 - Also available according to API 674, can also be operated vertically - Special media such as seawater, glycol, methanol, oils, etc. on request
Request for a quoteKAMAT GMBH & CO. KG
Germany
The K18000-3G triplex plunger pump has forced lubrication, making it ideal for continuous operation. Its main application is industrial cleaning. For large ship areas it is advisable to combine the pump with the Magnet Crawler (Ship Hull Crawler) from the Gekko range. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature. - Minimum inlet pressures dependent on fluid being pumped - Speed range 10-100% depending on rod force - Dynamically balanced gearbox - Forced lubrication gearbox (> 130 kW with oil cooler) - Standard gear ratios i = 3,00 - 3,14 - 3,39 - 3,76 - 4,13 - 4,50 - 4,93 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request
Request for a quoteKAMAT GMBH & CO. KG
Germany
High-Pressure Cleaning, Load Change Systems and Pressure Test Systems If your application requires forced lubrication and an oil cooler may be required, the powerful K9000-3G three-plunger high-pressure pump is an alternative to the smaller K8000-3G three-plunger high-pressure pump. Like the compact K8000 model, this 90 kW high-pressure pump is suitable for smaller industrial applications such as industrial cleaning, jetting or process engineering. SPECIAL FEATURES - Capacities at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on fluid - Speed range 10-100% depending on rod force - Forced lubrication gearbox (> 75 kW with oil cooler) - Standard gear ratios i = 2.75 - 3.22 - 3.68 - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request - Vertical operation possible
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS steam generators: - Efficient steam generation in combined heat and power plants - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Performance areas: 1 to 25 baro, 100 to 25,000 kg/h - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives - Single, double or triple version for operation with one, two or three engines with completely separate exhaust gas sections - The APROVIS Controlling System (ACS) is individually adapted to each project and is delivered in the required language - Access to the ACS using a modem enables easy fine-tuning of the system or remote maintenance for swift support if and when discrepancies occur during operation
Request for a quoteAPROVIS
Germany
What you can expect from APROVIS exhaust gas heat exchangers: - Efficient hot water generation in combined heat and power plants - Heating of thermal oil as an energy source - Individual solutions and compact designs - All the main components for the exhaust gas section and gas treatment are combined under one roof: proprietary products developed in-house - Cost-saving and reliable operation of the systems - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Maximum functionality, safety and service - Temperature ranges: up to 600°C on the exhaust gas side or up to more than 1,000°C in the high-temperature range - Certifications: PED 2014/68/EU, ASME Code, EAC - Can be used in all plants with exhaust gases from hydrogen, natural gas, biogas, sewage gas and special gases, plus diesel and other liquid fuels - Geared to international standards and directives
Request for a quoteNIDEC GRAESSNER GMBH & CO. KG THE GEAR COMPANY
Germany
The standard bevel gearbox Power Gear P-Version shows it’s strength in applications which depend on the following characteristics: High torque at smaller to medium input speeds Limited weight and smallest dimensions Sturdy, reliable and maintenance-free design Technical overview Sizes 12 gearbox sizes from P54 to P450 Configurations L, H, FL, FH Ratios from i = 1:1 to 5:1 Shaft arrangement WA 1, WA 3, WA 13 Input speed n 1max up to 7500 min -1 Motor mounting direct mounting with hollow shaft/flange
Request for a quoteLUTZ PUMPEN GMBH
Germany
The B70V SanitaryPlus food pump is a powerful positive displacement pump for highly sensitive, viscous media with and without fibres or solids up to the limits of flowability. It pumps liquid foodstuffs, active pharmaceutical ingredients and cosmetic products from a wide variety of containers and delivery packs. The pump fulfils the requirements of hygienic design and is certified in accordance with the "3-A Sanitary Standards". With reduction gear for electric motors up to 230 volts * Also available in special immersion depths * Examples of media: liquid foodstuffs and luxury foods, active pharmaceutical ingredients and cosmetic products * Threadless, manually detachable quick connections in the wetted area * Gentle, low-pulsation product conveyance * Certified and approved in accordance with the current "3-A Sanitary Standards for Centrifugal and Positive Rotary Pumps Number 02-10"
Request for a quoteRM2M
France
The cam-type limit switch is a device used to control the movement of industrial and construction machinery. Information is transmitted via the shaft actuating micro-switches. Standard range BFCN: Gear ratio from 7.5 to 550 Number of cams from 2 to 5 Maximum rotation speed: 500 rpm IP55 Range BFRS: Gear ratio from 10 to 200 Number of cams 2 or 4 Maximum rotational speed: 500 rpm IP55 Options for both ranges: potentiometer, gear wheels, couplings, mounting flange, various cams The micro-switches are either deflection type or with positive opening. The choice between different types of cams allows to modify the reaction curve of the limit switches. On request, specific versions: Up to 12 cams Protection IP66 / 67 /69K Integrated potentiometer or encoder ATEX zone 2 and 21
Request for a quoteCOMERC SP. Z O.O.
Poland
Redler type chain conveyors are designed for horizontal and inclined (up to 60°) transport of bulk materials such as pellets, sawdust, wood dust, wood chips etc. They are used as devices for loading and unloading silos, hammer mills, pellet mills and simultaneously for combining separate sections of technological lines. The drive section is equipped as standard with NORD company gear motors, rotation monitoring sensors and inspection hatches with overflow sensors. Drive shaft, on which flywheel is installed, is mounted in high-quality self-aligning ball bearings (SKF or SNR) Thanks to its construction tensioning section ensures constant optimum chain tension. Intermediate sections have length of 2000 mm as standard, but if necessary, section with non-standard length can be made. Bottom of conveyor is lined with antistatic, wear-resistant material (polyethylene PE 1000), which ensures low noise level.
Request for a quoteUNITED PROARC CORPORATION
Taiwan R.O.C.
1. All welded steel frame structure. 2. For long weldments rotation. 3. Capacities range from 500 to 20,000 kilograms. 4. Machined "T" slots table with pilot and through hole. 5. A. C. inverter drive for rotation. 6. Forward-Stop-Reverse and variable speed control are standard. 7. Totally gear-safe design. 8. Maintenance-free grounding system. 9. Optional adjustable table height to fit larger workpiece. *CE Conformity
Request for a quoteBAUSHOP EXPRESS GMBH
Germany
The Böcker mini crane is the ideal tool for moving large-format construction elements. Safe and error-free working as well as a significant acceleration of the working process are guaranteed by all mini crane models. - Hook height 4.5 m, telescopic to 6.0 m - Completely hot-dip galvanized (frame, tower, jib) - Trolley with electric motor drive - Wheel breakage protection and foot protection as standard equipment - Spindle lifting gear for electric motor-driven raising and lowering of mast and boom - Hoist with quick and fine lift, 8 m chain and load hook - Water-repellent protective hood - Optional rotary and cross travel drives, each with two speeds, rotary drive can be easily disengaged - One-tong system guarantees effective working Smooth-running rotating device ensures easy working - Low-backlash locking of the tower - Concrete ballast weight 650 kg / 960 kg with practical transport lug - Due to inclined position, up to 5 mini cranes can be loaded on one truck
Request for a quoteDOGUS KALIP METAL FORM SAN VE TIC LTD STI
Turkey
ASETAL BELT CONVEYOR Standard Widths 82,6 mm, 114,5 mm Standard Gear Dia Ø 109 mm Standard Lengths 1000 mm - 6000 mm Upon Request Lengths Optional.
Request for a quoteTOTALENERGIES LUBRIFIANTS
France
Standard, crown, planetary and worm gear boxes
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Standard gears - Import exportNumber of results
17 ProductsCompany type
Category