Standard chains - Import export

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

E4Q energy chains have been developed to provide the best possible solution for unsupported and long travels. Based on the robust E4.1 energy chain standard, which has proven itself over 12 years, the new series brings a long service life and high modularity. - Tool-free opening and closing - Reduced protrusions in the interior, for easier filling when the e-chain® is open - 15 % more pull-out force of the opening webs compared to the E4.1 system - 10 % less weight due to material recesses compared to system E4.1 - Optional 17 dB(A) quieter due to noise-reducing parts made of material optimized for noise level - 40 % less installation time compared to system E4.1 - Up to 35 % savings possible when used in the limit range - 36 months warranty - Predictive maintenance - optional with the isense add-on module Typical applications: Machine tools, crane systems, automation systems

Overview for triflex® advantages Other information triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification Overview for triflex® advantages Other information Application examples Interesting applications from a variety of industrial sectors Triflex® R Configure interior separation Define cables, select chain and configure interior separation. Now also for all Triflex® R series! Internal separation configurator Triflex® R QuickRobot Equipment support for various types of robots. Simplified ordering of complete systems. QuickRobot TRC.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11.3 mm e-chain® TRC.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining and separating of the triflex® R - TRC. Assembly Instructions TRC.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRC.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRC.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRC.100 Inner height Bi 1: 37.5 mm Inner height Bi 2: 32.5 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® TRC.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRCF.85 Inner height Bi 1: 30 mm Bending radius R: 135 mm Pitch: 30.6 mm e-chain® TRCF.100 Inner height Bi 1: 37,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting bracket for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm Bending radius R: 50 mm Pitch: 11,3 mm e-chain® TRE.40 Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13,9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the triflex® R - TRE. Assembly Instructions TRE.60 Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® TRE.70 Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain®. TRE.85 Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100 Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® TRE.125 Inner height Bi 1: 43,3 mm Inner height Bi 2: 43,3 mm Bending radius R: 182 mm Pitch: 44,6 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRE.40.B Inner height Bi 1: 15 mm Inner height Bi 2: 13 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® TRE.60.B Inner height Bi 1: 22,5 mm Inner height Bi 2: 19,5 mm Bending radius R: 87 mm Pitch: 20,4 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRE-B version. Assembly instruction TRE.70.B Inner height Bi 1: 28 mm Inner height Bi 2: 24 mm Bending radius R: 110 mm Pitch: 25,6 mm e-chain® TRE.85.B Inner height Bi 1: 33 mm Inner height Bi 2: 28 mm Bending radius R: 135 mm Pitch: 30,6 mm e-chain® TRE.100.B Inner height Bi 1: 37,5 mm Inner height Bi 2: 32,5 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket Assembly tool triflex® R B-version Assembly tool for disassembly of triflex® R B-version Assembly tool triflex® R B-version TRL.30 Inner height Bi 1: 12 mm Inner height Bi 2: 10 mm bending radii R: 50 mm Pitch: 11,3 mm e-chain® TRL.40 Inner height Bi 1: 15 mm Bending radius R: 58 mm Pitch: 13.9 mm e-chain® Installation instructions Instructions for the joining, separating and filling of the Triflex® R - TRL. Assembly Instructions TRL.60 Inner height Bi 1: 23 mm. Bending radius R: 87 mm. Pitch: 20.4 mm e-chain® TRL.70 Inner height Bi 1: 28 mm Bending radius R: 110 mm Pitch: 25.6 mm e-chain® TRL.100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34.5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket TRLF. 65 Inner height Bi 1: 24.4 mm Bending radius R: 100 mm Pitch: 23.1 mm e-chain® TRLF. 85 Inner height Bi 1: 32.8 mm Bending radius R: 135 mm Pitch: 31 mm e-chain® Assembly instruction Instructions for the joining, separating and filling of the Triflex® R - TRLF. Assembly instruction TRLF. 100 Inner height Bi 1: 38 mm Bending radius R: 145 mm Pitch: 34,5 mm e-chain® Standard mounting brackets for TRC / TRE / TRL. Also possible with strain reliefs and as intermediate connection. Standard mounting brackets Light mounting bracket Standard for the TRL version. Also compatible with TRC / TRE; possible with strain reliefs and as intermediate connection. Light mounting bracket triflex® RSP Continuously adjustable retraction force triflex® RSP triflex® RSE Infinitely adjustable retraction force for small robots triflex® RSE Triflex® R-Set Universal module for all motions on the robot Triflex® R-Set Fiber rod modules Intelligent problem solution through directed pretension. Fiber rod modules Universal assembly kit Offers the potential to mount the fiber rod module in the desired position on the robotic arm. Universal assembly kit Strain reliefs for large cross sections Secure mounting also in the use of cables with large cross section. Strain reliefs Gliding feed-through Available with and without swivel bearing Gliding feed-through Protectors Well protected in extreme applications. Protectors Heat shield Protection against weld and metal spills up to 600°C Heat shield CF Robot special cables Special cables for long service life in robotic applications. CF Robot special cables This system is especially suited for: First choice for multi-axis industrial robots Three versions are available: TRC: closed design; TRE: "Easy" design, very easy to fill in from outside; and TRL: the "Light" version, likewise with "easy" design Universally applicable in general mechanical engineering Secure energy supply system Multi-axis (3D movements) High torsional stability Can be shortened and lengthened as required due to the individual elements Large filling space Doesn't get stuck in the interfering edges Small bending radius Simple cable routing for three-dimensional applications with ball-and-socket system for absorption of high tensile strength Cables easy to install and replace (TRE/TRL version) Fiber rod module for partial reinforcement and to give direction TRL - One-piece element, extremely light High tensile strength without additional elements like steel cables, spring elements, etc. Typical industrial sectors and applications First choice for industrial robots Machine tools Handling equipment 6-axis Material handling system General mechanical engineering iF-Design Award for "TRC"- and "TRL"-Design Cleanroom environments on request Series TRC electrically conductive ESD/TEX versions possible UL94-V2classification

Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21 Overview for E2/000 advantages Other information Series EF2.21 Inner height hi: 21 mm Inner widths Bi: 25 - 50 mm bending radii R: 35 - 180 mm Pitch: 33.3 mm E-Chain®, snap-open along the outer radius Series 1500 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the outer radius Series 1400 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm E-Chain®, snap-open along the inner radius Series 1450 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Half energy tube, snap-open along the inner radius Series 1480 Inner height hi: 21 mm Inner widths Bi: 15 - 125 mm bending radii R: 35 - 180 mm Pitch: 33,3 mm Full energy tube, snap-open along the inner radius Series 2500 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the outer radius Series 2400 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 55 - 250 mm Pitch: 46 mm E-Chain®, snap-open along the inner radius Series 2450 Inner height hi: 25 mm Inner widths Bi: 25 - 125 mm bending radii R: 100 - 250 mm Pitch: 46 mm Half energy tube, snap-open along the inner radius Series 2480 Inner height hi: 25 mm Inner widths Bi: 38 - 103 mm bending radii R: 100 - 250 mm Pitch: 46 mm Full energy tube, snap-open along the inner radius Series 2700 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the outer radius Series 2600 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 63 - 250 mm Pitch: 56 mm E-Chain®, snap-open along the inner radius Series 2650 Inner height hi: 35 mm Inner widths Bi: 50 - 175 mm bending radii R: 100 - 250 mm Pitch: 56 mm Half energy tube, snap-open along the inner radius Series 2680 Inner height hi: 35 mm Inner widths Bi: 50 - 100 mm bending radii R: 100 - 250 mm Pitch: 56 mm Full energy tube, snap-open along the inner radius Series 3500 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the outer radius Series 3400 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 75 - 300 mm Pitch: 67 mm E-Chain®, snap-open along the inner radius Series 3450 Inner height hi: 45 mm Inner widths Bi: 50 - 255 mm bending radii R: 150 - 300 mm Pitch: 67 mm Half energy tube, snap-open along the inner radius Series 3480 Inner height hi: 45 mm Inner widths Bi: 75 - 115 mm bending radii R: 150 - 300 mm Pitch: 67 mm Full energy tube, snap-open along the inner radius Series 255 Inner height hi: 24 mm Inner width Bi: 25 mm Bending radii R: 55 - 250 mm Pitch: 27.8 mm E-Chain®, snap-open along the outer radius CRC series. 255 Inner height hi: 24 mm Inner width Bi: 38-103 mm Bending radii R: 150 - 250 mm Pitch: 27.8 mm e-chain® Series CRC. 255 Assembly tool E"2/000 e-chains® - quick opening with assembly tools. Assembly tool Overview E2/000 bow chains Two-part - the E2 standard as clamp chain version Overview E2/000 bow chains IPA Classification Report IG 1303-640-1, tested 1500.050.038.0 at v = 0,5 / 1,0 / 2,0 ISO Class 2, according to DIN EN ISO 14644-1 E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of chain links, filling of the E-Tubes. Assembly Instructions System E2/000 Recommended installation accessories Application examples Applications in various industrial sectors and in the igus® test laboratory. System E2/000 The E2 standard Quickly opened from the right or left with a screwdriver or by hand - opening mechanism accessible from above Lightning fast installation using thumb - safe seat without additional closing mechanism The separators and interior separation sit safely, even when the E-Chain® is open Excellent mechanical stability; design and material provide long service life Typical industrial sectors and applications General construction machinery Materials handling technology Construction machinery Wood machines Machine tools Glass machines Plastic machines Long travels Semiconductor Theater and entertaining industry Vehicles And much more ESD classification: Electrically conductive ESD/Atex versions on request IPA classification: ISO cleanroom class 3 (DIN 14644-1), at v=2 m/s, with standard material igumid G Series 2500.05.055.0 UL94 V0 classifications on request 46 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, e. g. Series 2600.05.075.0 iF Design Award for the E2/000 series EF2.21

Depending on the characteristics of the double glazing used in the Skymax system, up to 5.1* more insulation can be achieved compared to single glazing. The highest insulation was achieved in the glass balcony. Your balcony will be cooler in summer and warmer in winter. Another innovation in the glass balcony sector! Espagnolette lock. It is much more useful than standard chain locks with its stylish design and easy use. The optional built-in espagnolette lock provides more security. Sky Art engineers developed a special locking mechanism for the insulating glass balcony system. With the system called “ABL–Auto Brake Lock”, when the sliding glass panels come to the parking area, they are automatically locked and the wing can be opened without moving. In this way, the risk of falling and sagging when opening the wing is eliminated. In the system, in which a total of 28 mm (4+20+4 or 6+16+6) insulating glass

Managing skilled labour at plant warehouses Stock management at multi-producer hubs with advanced IT systems capable of handling any kind of request (FIFO, FEFO, dynamic picking) Coordination of transport and delivery flows with high service standards to large retail chains and stores (retailers, specialist outlets, pharmacies) Last-mile deliveries ensured through a network of selected and certified regional operators specialising in grocery Product tracing under ECR Standards Delivery tracking at every point along the way via a dedicated customer service team capable of providing real-time information Pallet collection including pallet exchange or pooling Management of peaks (in consumption, production or finance), thanks to maximum flexibility in transport and distribution operations

JDN air hoists mini Carrying capacities: 125 kg, 250 kg, 500 kg, 980 kg Air pressure: 6 bar Standard Features interesting and inexpensive alternative even to hoists with other driving media suitable for lube-free operation suitable for application in hazardous areas (Explosion protection) few components only for easiest maintenance wear resistant motor braking system light weight for easy handling also suitable for horizontal pulling extremely sensitive lever control with emergency shut-off valve, max. control length 6 m available lifting heights: 3m, 5m, 8m with chain box as standard with manual trolley as option

A special link pin design distinguishes hollow pin roller chains from standard roller chains. Hollow pin roller chain links have a similar construction to ISO standard roller chains; They consist of pin, bushing and small pulley, so most chains of this type are compatible with the same sprockets as the corresponding standard chains. Since double chain operation is customary in most applications, we can supply these chains paired. The product range includes various versions of this chain type, such as hollow pin roller chains, hollow pin bushed chains or hollow pin roller chains without bushings, as well as various corrosion-resistant surface finishes (galvanized, nickel-plated, stainless). steel)

1. It is a Single Leaf Chain Included in Two Standards EL chains are only included in the ISO standard, while AL chains are not subject to any regulation and have dimensions that vary between manufacturers. However, BL leaf chain is included in the international chain standard ISO4347 and BS29.8. 2. Offers Excellent Length Consistency BL series leaf chain has a consistent and reliable pitch and length because it consists of specific components. 3. It Has a Relatively Better Tensile Strength Rate BL series leaf chain has higher tensile strength and lower weight. The tensile strength rating can be up to 15% better than EL leaf chain, making it ideal for forklift masts and telescopic booms.

The product is antique silver plated on zamak metal. Mobility is provided with symmetrical length chains from the neck collar. Its design is completed with spiral shaped charms. It is a special collection product of the Labalaba brand and is handcrafted. In order for the products to be used for a long time without losing their properties, contact with perfume, water and liquid chemicals should be avoided. All products in this collection have Nickel/Free features. It has anti-allergic properties. Product Measurement Information: Necklace neck width; standard 14cm + 15cm adjustable extension chain. Pendant: Max chain length 45 cm. Weight: 220 gr. Made in Turkey. It is shipped in a box.

The product is antique silver plated on zamak metal. The neck part is produced by hand-combining embossed textured stick-shaped pieces. It is designed in triangular form with oval shaped relief textured pieces. It is a special collection product of the Labalaba brand and is handcrafted. In order for the products to be used for a long time without losing their properties, contact with perfume, water and liquid chemicals should be avoided. All products in this collection have Nickel/Free features. It has anti-allergic properties. Product Measurement Information: Necklace neck part width 6.5 cm; Length standard 32cm + 15cm adjustable extension chain. Necklace Triangular shaped apron part: Length 26 cm with Max charms. Weight: 320 gr. Made in Turkey. It is shipped in a box

UK STANDARD CHAIN/

Suitable for business that have no problem with dead zones Prevents load’s swinging Comes with rope or chain Adjustable intermediate distance Thanks to its modular structure it can be used with different dimensional units 600 ton carrying capacity Makes wide and heavy loads safely loaded Prevents damage while loading Supporting attachments that can change weight axis CARRYING TRAVERSES Carrying capacity of 0-50 tons Constant and adjustable traverses Makes unbalanced or unequal products to be safely lifted Low dead field Can be used for separate weight Compatible with CE standards Compatible with chain sling and chain hooks Heavy-duty type manufacture Easy stocking Can be used with single or dual hookAs Per International Standard

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness For heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness Suitable for heavy to medium goods Allround film for most applications Perforated for easy separation Made in Germany

The reliable AirWave standard film with 20µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100% recyclable material (HDPE) 20μm wall thickness For heavy to medium goods Allround film for most applications Cushion size: 200x210mm Jumbo roll with 2000m (lfm) Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.

The reliable AirWave standard film with 20 µm is perfect e.g. to fill cavities and intermediate layer to protect your goods during transportation. 100 % recyclable material (HDPE) 20 μm wall thickness For heavy to medium goods Allround film for most applications Cushion size: 210 x 150 mm Jumo roll with 2000 m (meters) Perforated for easy separation Made in Germany Compatible with the AirWave1, AirWave2 and AirBoy micro air cushion machine.

This type of Chains are Standard External Chains and They are designed using the sub-structure of DIN 8187, DIN 8188 and DIN 8181 Standard Chains.

DIN 8182 German Standard Half LinkTwisted Roller Chains.

These types of chains are generally formed by the use of DIN 8187, DIN 8188 and DIN 8181 standard chains. According to the usage areas and purposes, it is obtained from U-twisted (bridge) metak sheet which is located in the outer link area. Rubber cladding is done on U-Twist (bridge) profiles according to customer requirements and working conditions within the range of 50-80 SHORE hardness.

The standard chain slinger is used with link chains and can also be used purposefully without a guide cage up to DN 300.

Roller chain with straight side plates according to ISO 606, DIN 8187, DIN 8188, ANSI, Britisch Standard

the context of the ELITE conveyor chain range, iwis suppliesa wide variety of chains according to standards DIN 8165 and DIN 8167, as well as models manufactured according to British Standard with dimensions in inches, and highly diverse special versions. Bush conveyor chains are often used for conveying tasks involving long transport distances at relatively low speeds. Since only a small minority of chains used in the industry are totally compliant with one specific standard, ELITE conveyor chains are custom-made to a specific customer order and consequently fulfil a large number of special requirements. Product range: • Bush conveyor chains according to DIN 8167 – M Series • Carrier chains with rollers according to DIN 8167 – MT Series • Hollow pin chains according to DIN 8168 – MC Series • Hollow pin chains according to DIN 8165 – FVC Series • Scraper chains according to DIN 8165/DIN 8167 • Conveyor chains for the paper industry • Rotary chains

In the context of the ELITE conveyor chain range, iwis suppliesa wide variety of chains according to standards DIN 8165 and DIN 8167, as well as models manufactured according to British Standard with dimensions in inches, and highly diverse special versions.

iwis Leaf chains (according to works standard) are produced from precision chain parts according to ISO 606. They can be customized and are compliant with the EC Machinery Directive 2006/42/EC. Highlights - iwis link plates with very high tensile strengths - Pins with extra hardened surface for high wear resistance - Precision-formed, heat-treated and shot-peened link plates with optimised geometry - Higher breaking forces achieved by optimised plate thickness - Improved press-fitting of pins and outer plates for higher fatigue strength - Link plates with a particularly high contact ratio - Pins with hardened surfaces for increased wear resistance - Special versions manufactured to works standards available