Standard aluminium - Import export

PHYSICAL FEATURESOF ALUMINM Melting temperature : 650 - 600 C Coefficient of linear expansion: Between 20-100 C,24 X 10 C Resistivity : 20 C 0, 0282 Ohm mm./m.

With reference to the Specifications: EN ISO 15977 dome head EN ISO 15978 countersunk headSURFACE TREATMENTS ON ALUMINIUM: Anodizing : it is possible on all rivet bodies in aluminium alloy, except for sealed rivet bodies due to the particular methodology of production. Epoxy painting.

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw L = Length TR = thread outer diameter m = pitch Leadscrewsstorage Anodized aluminum bearing blocks of iglidur® L250. Design your own linear table. Leadscrewsstorage Single start trapezoidal lead screw Two start trapezoidal lead screw Lead-free - According to (RoHS) 2002/95/EG Standards and Certificates

"Aluminum motors offer a lighter solution to our customers, compared to a cast iron frame. STANDARD ALUMINUM MOTORS (OUR CODE: MA) - Three-phase motors with aluminum cage - IP55 protection - Class F insulation - Class B heating - Removable feet, which allows the terminal box to be turned to the desired side - Stored in 230/400V - 400/690V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).

These types of brushes are particularly versatile in the way in which they can be mounted and in which they harmonise visually. 11 standard types of sealing brushes with aluminium profiles are available from stock, filled with polyamide (PA6), polypropylene (PP) and soft horse hair (mane hair MAH).As our standard types which are available from stock we chose our most demanded sealing brushes concerning the trim heights and overall lengths.

Standard Ingot Mold for aluminum smelting for primary aluminum producer 1000lbs, 1200lbs, 1500lbs Huan-Tai offer ingot molds with many sizes of standard, low-profile and high-profile, and with or without fork pockets as in the table below. Our molds are cast from a proprietary material, the material is developed by our own to provide a very good durability. In addition to our proprietary material, we also supply other conventional steel molds and ductile iron molds, the material will be ASTM A27 Gr 70-40, ASTM A148 Gr 105-85, AISI 8630, GGG-40, GGG-50 and other materials that customers want, contact us to find the best solution for your company.

Huan-Tai offer ingot molds with many sizes of standard, low-profile and high-profile, and with or without fork pockets as in the table below. Our molds are cast from a proprietary material, the material is developed by our own to provide a very good durability. In addition to our proprietary material, we also supply other conventional steel molds and ductile iron molds, the material will be ASTM A27 Gr 70-40, ASTM A148 Gr 105-85, AISI 8630, GGG-40, GGG-50 and other materials that customers want, contact us to find the best solution for your company.

Huan-Tai offer ingot molds with many sizes of standard, low-profile and high-profile, and with or without fork pockets as in the table below. Our molds are cast from a proprietary material, the material is developed by our own to provide a very good durability. In addition to our proprietary material, we also supply other conventional steel molds and ductile iron molds, the material will be ASTM A27 Gr 70-40, ASTM A148 Gr 105-85, AISI 8630, GGG-40, GGG-50 and other materials that customers want, contact us to find the best solution for your company.

HUAN-TAI Standard Skim Pans Dross Pan Slag Pan Skim Pot with Single Chamber for Aluminum Recycling Industry. Made of a patented material which is developed by our own, our skim pots and sow molds have a very durable quality. We innovatively re-design the skim pots and sow molds to make them have a very fast cooling speed, which results in a remarkable reduction of oxidation. In addition to our patented material, we can provide the options for materials to fit in different applications of customers. As shown in the tables below, we have many sizes of Skim pots and sow molds already available, they could cover many applications, and no pattern costs needed for them.

Safety is a top priority for Novelty Structures, and all truss systems undergo testing and certification to ensure they meet load rating and safety standards. If you’re unsure about your needs, please drop us an email for detailed assistance or learn more about the truss components and systems. All of our connection fittings are constructed with conical and single –pin connections that are used worldwide and provide the systems to integrate in accordance with these standards. Novelty Structures supplies below aluminium trusses for various applications. * Ladder Truss * Triangular Truss * Square Truss / Box Truss * Truss Clamps & Accessories

The KULLEN roller brush type 350 is one of our "highlights" as it consists of a lightweight aluminium core with horizontal grooves where strip brushes are fitted in.Two standardized aluminium cores are available:For our brush type 350/54 with 20 horizontal grooves,which means the brush consists of max. 20 strip brushes around the circumference.For our brush type 350/85 with 36 horizontal grooves, which means the brush consists of max. 36 strip brushes around the circumference. The fill configuration is either dense (EC1) or light (EC2) which means an axial strip configuration.You can use almost alll type of fill material except synthetic bristles exceeding dia. 0.60 mm and wires exceeding dia. 0.20 mm. The strip brushes for the roller brush types 350 are mounted in the profiled aluminium tube cores - either with standard bore (AL 31 resp. 60 mm) to be seated on a primary shaft. - or with reduced bore by bushes to be seated on a primary shaft. - or with journals.

Retractable power distributor SV302 for outdoor use, made of saltwater-resistant aluminum. The retractable power distributor SV302 is accessible by car, of course, only when the lid is fully closed. The standard surface is natural aluminum. As standard, the distributor is equipped with 4 SCHUKO sockets with VDE test mark. The housing is watertight when closed, protection class IP67. Further assembly variants on request.

Retractable power distributor SV301 for outdoor use, made of saltwater-resistant aluminum. The retractable power distributor SV301 is accessible by car, of course, only when the lid is fully closed. The standard surface is natural aluminum. As standard, the distributor is equipped with 4 SCHUKO sockets with VDE test mark. The housing is watertight when closed, protection class IP67. Further assembly variants on request.

KEIPER timing belt clamping plates can be made of many different materials, e.g. aluminum, steel or stainless steel. Keiper can produce them in all pitches and designed according to your specifications and drawings. This means that you will receive the optimal solution for the intended application and load. Our timing belt clamping plates work together optimally with our extensive and complete range of timing belts: in other words, a perfectly matched system for your requirements. We also have a large number of standard aluminum clamping plates on stock, which can be reworked according to your specifications (e.g. bores and mechanical processing based on drawings). Furthermore, such special surface coatings as hard coating, anodizing, zinc coating or bronzing improve the corrosion and wear resistance.

Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.

Round CEE floor tank 7022A with lockable lid made of saltwater-resistant aluminum. The CEE floor tank is installed at floor level and can be driven on by car due to its solid construction. Waterproof when closed. Protection class IP 67. Standard surface in natural anodized aluminum. Further configurations and colors on request.

Round floor socket 7003A made of saltwater-resistant aluminum, with 2 slots and a lockable lid. The lid can be removed completely. Single box to be set at floor level, heavy design, accessible by car. Splash proof when closed, protection class IP 65. Standard surface in natural aluminum anodized. Other colors and equipment options on request.

Round CEE floor tank 7012A63 with lockable lid made of saltwater-resistant aluminum. Due to its massive construction, the CEE floor tank can be driven over by a car. When closed, the floor tank is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration and colors variants on request.

Round CEE floor tank 7012A with lockable lid made of saltwater-resistant aluminum. Due to the massive construction, the CEE floor tank is accessible by car. When closed, it is waterproof. Protection class IP 67. Standard surface in natural anodized aluminum. Further configuration variants and colors on request.

Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator.

SPIROL's BP100 Press-N-Lok™ Pin has opposing barbs on each end of the pin and is designed to permanently retain two plastic components to each other such as two halves of a plastic enclosure. Press-N-Lok™ Pins are installed in two stages: First, press the pins into one half of the plastic housing. Next, align the other half of the housing with the exposed pins and press into place. During installation, the plastic will backfill into the area around the barbs resulting in maximum resistance to axial force. SPIROL's Press-N-Lok™ Pins are manufactured from lightweight, lead free aluminium as a standard, and available to order in austenitic stainless steel. BP100 Press-N-Lok™ Pins are available in diameters ranging from 2mm to 4mm.

Introducing the Aluminium Ingot A8 - a premium-grade product that embodies excellence in the realm of primary aluminium. Crafted with utmost precision and utilizing top-notch manufacturing techniques, this ingot is designed to meet the highest industry standards. The Aluminium Ingot A8 is a testament to our commitment to delivering superior quality. Meticulously refined and processed, it boasts unparalleled purity and consistency, making it an ideal choice for various applications. Whether you're in the automotive, aerospace, or construction sector, this ingot guarantees exceptional performance and reliability.

All type of Standard Aluminium Profiles and Sigma Profiles

Aluminium base Standard column of our VMM150 measuring microscope Z axis with 150 mm travel range

The chemical composition of the products is in accordance with EN573, ASTM B209, ASTM B928 standards; The production process is in accordance with EN573, ASTM B209, ASTM B928 and AMS, DIN, AA standards. Features Fully stretched, aluminum sheet products in different sizes Product surfaces that can be produced completely oil-free or low-oil Film coating on the surface or paper application between the sheets upon request Compliance with EN, AA or ASTM standards in all processes

The chemical composition of the products is in accordance with EN573, ASTM B209, ASTM B928 standards; The production process is in accordance with EN573, ASTM B209, ASTM B928 and AMS, DIN, AA standards. Features Fully stretched, aluminum sheet products in different sizes Product surfaces that can be produced completely oil-free or low-oil Film coating on the surface or paper application between the sheets upon request Compliance with EN, AA or ASTM standards in all processes

The chemical composition of the products is in accordance with EN573, ASTM B209, ASTM B928 standards; The production process is in accordance with EN573, ASTM B209, ASTM B928 and AMS, DIN, AA standards. Features Fully stretched, aluminum sheet products in different sizes Product surfaces that can be produced completely oil-free or low-oil Film coating on the surface or paper application between the sheets upon request Compliance with EN, AA or ASTM standards in all processes

The chemical composition of the products is in accordance with EN573, ASTM B209, ASTM B928 standards; The production process is in accordance with EN573, ASTM B209, ASTM B928 and AMS, DIN, AA standards. Features Fully stretched, aluminum sheet products in different sizes Product surfaces that can be produced completely oil-free or low-oil Film coating on the surface or paper application between the sheets upon request Compliance with EN, AA or ASTM standards in all processes