Standard aluminium profiles - Import export

Six Metal - Standard Aluminium Profiles: T Profiles, Z Profiles, U channels, Tubes, Round Bars, Square Tubes, Angles, Radius Square Tubes, Rectangular Profiles

DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv DryLin® N - Technical data DryLin® linear guide systems in the cleanroom DryLin® N - Applications DryLin® N - Design rules System selection & service life calculation NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. DryLin® N - Low profile linear guide system NK-02-17 DryLin® N - Low profile linear guide system NK-22-17-40 drylin® N - Low profile linear guide system NK-22-17-30 NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor DryLin® N low profile guide systems offer you low profiles in various widths. Like in all drylin® products, the carriage runs without lubrication in anodized aluminum profiles. The material used and the unique design make DryLin® N a cost-efficient and flexible guide system. Technical data Gliding elements: Maintenance-free Material: iglidur® J * Max. surface speed: 15 m/s Operating temperature: -40°C to +90°C *Other materials on request 1 Rail made of anodized aluminum 2 Gliding elements made of iglidur® J or J200 3 Carriage made of chromated zinc or plastic 4 Carriage with threaded hole or through hole Advantages: Small installation height between 6 and 12 mm Lightweight Numerous carriage options – also with pretension Maintenance-free, self lubricating Corrossion-resistant Low wear with low coefficient of friction Rails in silver or black anodized When not to use ? When precision below 50 μ is required In high loads over 50 kg drylin® T drylin® R drylin® W When high resistance to chemicals is required drylin® W drylin® R DryLin® N miniature gliding systems - basics DryLinN2010.wmv DryLin® N - Installation video of the gliding elements DryLin_N_Montage.wmv Standard, preload and floating bearing NW 17 = 17 mm rail width The smallest type series of the drylin® N series distinguishes itself by the lowest dimensions and high stressing capacity. This series operates free of lubrication and offers the potential to execute high-speed applications. Variants: Standard, Preload (P), floating bearing (LL) extrem low weight Quiet running Installation height 6 mm up to 50 N load NW 17 Preload (with pretension)The NW 17 Preload model of the drylin® N series displays, in addition to the features of the NW 17, an automatic pre-stressing within the rail. Freedom from lubricants and the potential to execute high travel speeds distinguish this series. 1. NW-01-27 standard 01 with through hole g 2. NW-02-27 standard 02 with threaded hole 3. Preload with through-hole or threaded hole 4. uinjection-molded with through-hole or threaded hole 5. NW-21-27-60P Vollkunststoffschlitten mit Durchgangsbohrung 6. NW-22-27-60P solid polymer carriage with through hole 7. NW-11-27-80 double carriage with through hole NW 27 = 27 mm rail width The installation size 27 offers the largest range of various guide carriages. They vary in the connecting potentials, lengths and precision. The injection-molded types additionally facilitate the stocking and installation. NW 27 Preload (with pretension) Identical version to the DryLin® standard carriage NW-01/02-27 and NW-02-40 respectively. The version injection-molded with iglidur® J offers an enhanced installation-friendliness and easier storage for large quantities. Features like the high wear resistance as well as low coefficients of friction remain unchanged. Over 20 carriage options 9.5 mm installation height 100% lubricant-free iglidur® J plain bearing material up to 500 N Last Best selling linear guide DryLin® N - Low profile linear guide system NK-01-27 DryLin® N - Low profile linear guide system NW-21-27-60P DryLin® N - Low profile linear guide system NK-11-27-80 DryLin® N - Low profile linear guide system NK-02-27 DryLin® N - Low profile linear guide system NW-22-27-60P DryLin® N - Low profile linear guide system NK-12-27-80 1. Standard 02 with threaded hole 2. Injection-molded with threaded hole 3. Standard 01 with through hole NW 40 = 40 mm rail width The dimension 40 defines itself by the rail width of 40 mm and ideally fits standard aluminum profiles. The carriages are available with threaded pin or through hole. The gliding elements are available as clip version or directly injection-molded. Lightweight Installation height 9,5 mm high speeds are possible (up to 5 m/s) iglidur® J plain bearing material up to 700 N Last DryLin® N - Low profile linear guide system NK-01-40 DryLin® N - Low profile linear guide system NK-02-40 drylin® N - low profile linear guide system preload NW-01-40P drylin® N - low profile linear guide system preload NW-02-40P 1. Standard 02 with mounting nuts 2. Injection-molded with mounting nuts NW 80 = 80 mm rail width The largest series in the DryLin® N type series offers the potential to take high loads with low installation height. The largest series also operates free of lubrication and can undertake high-speed applications. The gliding elements can be replaced in the clips option, and the injection-molded option facilitates the installation. Installation height 12 mm 100% lubricant-free Wide torque support up to 1000 N Last Gliding elements made of iglidur® J or J200 DryLin® N - Low profile linear guide system NK-02-80 Telescope system Mounting rails: Anodized aluminum Intermediate rail: Plastic Options: Full extension, over extension (+ 20 mm), partial extension Continuous lengths up to 1200 mm extended total length Lubricant-free Low noise Corrosion resistant From stock DryLin® telescopic rails End caps. The new plastic end caps, suitable for DryLin® N rails, offer „protection against loss“ for the carriages and cover the open sharp edges of the profi les safely and in an aesthetic way. Easy installation Low-priced Dismantling possible High retention force DryLin® N end caps Low profile linear axis - SLN-27-01 SLN-27-01: Linear axis for manual operation with hand wheel (SHT-HR-05-22-15-OG) SLN-BB-27-01: Ball bearing linear axis for manual adjustments with hand wheel 100 / 150 / 200 / 250 mm strokes Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points Feed with spindle Ø 5 and pitch 0.8 and/or 5 mm Manual and motorized operation drylin® miniature linear axis Low profile linear axis - SLN-27-02 SLN-27-02: Linear axis with NEMA11 stepper motor, ball bearing spindle over motor bearing SLN-BB-27-02: Ball bearing linear axis with NEMA11 stepper motor Small (installation height from 22 mm), light and flat Plastic plain bearings in the bearing points M5-thread (5x0,8 mm), steep thread 5x5 and 6x12,7 Manual and motorized operation drylin® SLN low profile linear axis with motor

These types of brushes are particularly versatile in the way in which they can be mounted and in which they harmonise visually. 11 standard types of sealing brushes with aluminium profiles are available from stock, filled with polyamide (PA6), polypropylene (PP) and soft horse hair (mane hair MAH).As our standard types which are available from stock we chose our most demanded sealing brushes concerning the trim heights and overall lengths.

Steel. Toothed pulleys without aluminium rim flanges. Version Steel phosphated. Aluminium bright. Note Standard HTD profile with metric pitch (halfround toothing). At least one belt pulley must have a rim flange. The toothed belt pulleys have a centre bore or a pilot hole (this can vary due to manufacturing methods). For this reason, the dimension D2 max. given in the table is the maximum diameter of the bore with which the toothed belt pulleys are supplied. This pilot/centre bore can be amended by the customer to produce a reamed bore, reamed bore with keyway or a tapped hole. Alternatively, customers can also use bushes to reduce the bore diameter. The pulleys may be recessed on the sides.

Standard aluminium profiles produced in form of rectangular from 20 х 10 mm to 200 х 100 mm.

Standard aluminium profiles produced in form of square from 12 х 12 mm to 120 х 120 mm

Standard aluminium profiles produced in form of rectangular with radius from 30 х 15 mm to 80 х 80 mm.

Standard aluminium profiles produced in form of round bars from 6 mm to 60 mm. They can be powder coated in any RAL colour, processed mechanically and anodized

Standard aluminium profiles produced in form of flat sided oval from 23.2 х 13.4 mm to 80 х 40 mm. All types of tubes can be produced with radius.

Standard aluminium profiles produced in form of flat bars from 25 х 2.5 mm to 200 х 10 mm. They can be powder coated in any RAL colour, processed mechanically and anodized

Standard aluminium profiles produced in form of flat bars from 14 х 2 mm to 210 х 22.5 mm and square bars from 10 mm to 40 mm. They can be powder coated in any RAL colour, processed mechanically and anodized.

PRODUCT INFORMATION It is designed to operate quickly and precisely lock’s holes on aluminum and PVC profile, without releasing the workpiece. Copy router with 1 vertical and 2 horizontal spindle motors ( 3 x 1.1 Kw 12.000RPM) Designed to perform quickly and precisely lock’s holes on 3 sides of the aluminum profile without releasing the workpiece Pneumatic 2 x horizontal and 2x vertical clamps Horizontal and vertical pneumatic tracers with 3 diameters Ø 5, Ø 8, Ø 10 mm Horizontal & vertical templates with standard figures for Aluminum and PVC profiles Smooth movement, high precision and great sensitivity provided with gas spring and ergonomic handles 1 m of roller support table at the right (with ruller) and left side Spray tool lubrication system OPTIONAL ACCESSORIES • Additional router bits with Ø5mm, Ø8mm and Ø 10mm • Additional collets with, Ø 8 and Ø10 • Special templates Videolar TECHNICAL SPECIFICATIONS 3x1.1 kw 1 P 230 V 50-60 Hz 6-8 Bar 8 lt./ min.

Gives standard brightening effect to Aluminium profiles during polishing process.

S-Rail 40 is the solar mounting rail which is the most appropriate rail for trapezoidal and sandwich roofs. S-Rail family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 40 mm Upper Width: 50 mm Lower Width: 86 mm

S-Guard 40 is the solar mounting rail which is the most appropriate rail for universal usage. S-Guard family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 40 mm Upper Width: 40 mm Lower Width: 40 mm

S-Armor 40 is the solar mounting rail which is the most appropriate rail for universal usage. S-Armor family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 40 mm Upper Width: 40 mm Lower Width: 40 mm

S-Rail 60 is the solar mounting rail which is the most appropriate rail for trapezoidal and sandwich roofs. S-Rail family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 60 mm Upper Width: 50 mm Lower Width: 86 mm

S-Armor 60 is the solar mounting rail which is the most appropriate rail for universal usage. S-Armor family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 60 mm Upper Width: 40 mm Lower Width: 40 mm

S-Guard 60 is the solar mounting rail which is the most appropriate rail for universal usage. S-Guard family is compatible with all Standart Aluminium Solar Mounting Systems. Technical Specifications Height: 60 mm Upper Width: 40 mm Lower Width: 40 mm

Not all extruded profiles are required to be circular in shape! Whether it is a seamless or porthole hollow-profile, at ALUnna, we have a multitude of possibilities. Simple profiles, such as a solid profile or an angle profile, are also available. On some profiles we may have the possibility to further improve the dimensional tolerances by adding a subsequent drawing step to achieve final dimensions. In addition to round tube, shaped, square or rectangular tubes in both medium strength and high-strength alloys can be produced.

"Unleash the Potential of Your Projects with Magmett's Superior Aluminum Profiles - Crafted with Precision, Backed by Quality" Introducing Magmett Aluminium Profiles, the epitome of excellence in the realm of aluminum profiles. Crafted meticulously from our very own "Made by Magmett" billets, our premium quality profiles are unrivaled in their performance and durability. With a thickness range spanning from 0.8mm to 125mm, and profile sizes reaching up to an impressive 14300mm, Magmett offers a diverse range of options to suit your specific needs. Our profiles are available in various alloys, ensuring that you find the perfect match for your project. To further enhance the aesthetic appeal and longevity of our profiles, we offer a selection of sand blasted anodized and powder coated finishes. These finishes not only add a touch of elegance to your design but also provide added protection against the elements.

Introducing Skilled Manpower - a premier provider of extrusion line solutions tailored to meet your specific requirements. With our state-of-the-art facilities, we boast a range of 5" to 10" presses, meticulously designed to handle a variety of profile sections. At Skilled Manpower, we understand the significance of alloy selection and its impact on the final product. That's why we prioritize your preferences when it comes to alloy type and press line. Our extrusion process is optimized to accommodate special alloys, including EN AW 6060, 6063, 6463, 6005, 6082, 6013, 6005, and 7xxx. What sets us apart is our unwavering commitment to delivering excellence. With a team of highly skilled professionals and a dedicated management team, we ensure that each and every product leaving our facility exceeds customer expectations. Our meticulous attention to detail guarantees that our extrusions are tailored to satisfy your specific end-use requirements.

"Unleash the Potential of Your Projects with Magmett's Superior Aluminum Profiles - Crafted with Precision, Backed by Quality" Introducing Magmett Aluminium Profiles, the epitome of excellence in the realm of aluminum profiles. Crafted meticulously from our very own "Made by Magmett" billets, our premium quality profiles are unrivaled in their performance and durability. With a thickness range spanning from 0.8mm to 125mm, and profile sizes reaching up to an impressive 14300mm, Magmett offers a diverse range of options to suit your specific needs. Our profiles are available in various alloys, ensuring that you find the perfect match for your project. To further enhance the aesthetic appeal and longevity of our profiles, we offer a selection of sand blasted anodized and powder coated finishes. These finishes not only add a touch of elegance to your design but also provide added protection against the elements.

Sigma profiles provide an easy and versatile installation opportunity thanks to its channel structure. Sigma profiles are used in many areas such as conveyor, chassis, table, cabinet, cnc, area closure and are a special material that meets the needs of the industry. The reasons why aluminum is preferred in applications: Aluminum is lightweight. It weighs only a third of the same volume of steel. Aluminum is resistant to weather conditions, foodstuffs and many liquids and gases used in everyday life. It has an attractive appearance for both interior and exterior use and this appearance can be maintained for a long time. The strength of various aluminum alloys is equal to or higher than the strength of normal structural steel. Aluminum is an elastic material. Therefore, it is resistant to sudden impacts. In addition, its strength does not decrease at low temperatures, as is the case with steels. It is an easy metal to process. It conducts heat and electricity as well as copper.

EN-755-9 and EN-12020-2 are the accepted norms for the extrusion of aluminium profiles. They allow deviations of 0.15 mm or more. Mifa ignores these norms and applies precision extrusion of 0.02 mm. We’re unique in the world! And it gives countless possibilities. Bulk production. Standardised work. Inaccurate. These are words that you’ll hear often if you ask engineers for the features of extrusion. But there is another option. Mifa’s delivery starts from 10 kg, and we offer custom-built products and precision, also for straightness, torsion, concentricity, parallelism, surface roughness and tting. Add to this the outstanding features of aluminium – post-processing is often not needed – and it becomes clear that precision extrusion would be useful for many applications. Even as a replacement of other techniques and materials.

New energy battery aluminium shell, aluminium extrusion, aluminum profile

We can customize Aluminum Extrusion Aluminum Profile according to your drawing or sample. We can make the surface treatment for max 6500MM length aluminum profiles.

Customize Aluminium Profile Aluminium Extrusion

Machines for the manufacture of PVC and Aluminium Doors and Windows