Stainless steel wires - Import export

CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3

CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3

Goodridge Lock wire is an Aircraft grade 321 stainless steel lock wire made to military specifications is perfect for positioning hoses or mounting hardware. Lock wire or safety wire is a type of positive locking device that prevents fasteners from loosening due to vibration as well as other forces. The presence of safety wiring also serves as an indicator that the fasteners have been properly tightened. Lock wire is available in a variety of gauges and materials, depending on the application. In racing applications, stainless steel wire is used, most commonly in 0.032" in (0.81mm) diameter. Typically, the wire is threaded through a hole drilled into a fastener or part, then twisted and anchored onto a second fastener or part, then twisted again

Hot dipped and electro galvanized steel wire is used to armour cables and wires, it is made from low carbon rods.

Stainless steel bars / Stainless Steel rods are used in vast applications and are widely used in the various industry due to its durability and resistance to corrosion and rust. Our stock of stainles steel bars and stainless steel rods are always available in a wide range of diameters from 4 mm right up to 300 mm in lengths of up to 3 metres, 6 metres and supplied in 1.4301 (AISI 304), 1.4305 (AISI 303), 1.4404 (AISI 316L), 1.4021 (AISI 420), 1.4105 (AISI 430F) metal grades.

Stainless Steel Bright Wire, Annealed Wire, Cold Heading Wire, Spring Wire, Wire for Braiding, Wire for Weaving, & Welding Wire

keychain lighter metal with stainless steel wire keychains oval soft pastic wholesale oem welcome

composition : X10CrNi18-8 (NS / HS) According to EN 10270-3302 and AISI 302 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.

composition : X7CrNiAl17-7 According to EN 10270-5631 and AISI 631 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.

composition : X1NiCrMoCu25-20-5 According to EN 10270-7904L and AISI 904L The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.

composition : X5CrNi18-10 (NS / HS) According to EN 10270-6304 and AISI 304 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.

composition : X5CrNiMo17-12-2 According to EN 10270-4316 and AISI 316 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.

Are you looking for large round twisted wire brushes? For cavity wall insulation, gutters or pest control? Jobo Brush Factory BV makes these brushes in all shapes and sizes in its own factory. The bristles of these brushes are twisted into 2 galvanized or stainless steel wires. Maximum length: 30mm to 2 meters. Maximum diameter: Ø10 mm to Ø200 mm. Hair: Nylon, PBT and PP in various colors and thicknesses (from soft to hard). Stainless steel and brass. Wires: Galvanized or stainless steel.

Damping cushions made of stainless steel are knitted and pressed in a special process. Depending on size, density and design it can be loaded in a range between 5 and 20.000 kg. It can be pressed in cylindrical or rectangular shape. Versions with bunches and steps are available. Standard materials are 1.4301 and 1.4404. Additional materials and special designs are on demand. RG+ offers the following damping cushions as standard elements: GKK as a vibration damper in cylindrical form GKR as a vibration damper in rectangular form GKB as a vibration damper with a bunch

NSPV Stainless steel cable ties They have an unique ball locking with Plastic jetting mechanism that allow easily and quickly installed and High tensile strength; Non-flammability. Stainless steel cable ties are a quick effective way of securing cables.They can be used in virtually all indoor outdoor,heavy industrial and underground applications.

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material: 301 stainless steelColor: White Package: 100PCS//bag 500PCS//bag Ambient temperature range: -40℃…+85℃(IEC） SCC-US/2 Suitable for cable: OD 2*4.0/6.0mm2 Application for Module

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material: 301 stainless steelColor: White Package: 100PCS//bag 500PCS//bag Ambient temperature range: -40℃…+85℃(IEC） SCC-90/4S/2(SCC-NS/2) Suitable for cable OD: 90Degree 2*4.0mm2 Application for Module 90 Degree

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material: 301 stainless steelColor: White Package: 100PCS//bag 500PCS//bag Ambient temperature range: -40℃…+85℃(IEC） SCC-90/US/2

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material301 stainless steelColor White Package100PCS//bag 500PCS//bagAmbient temperature range-40℃…+85℃(IEC） SCC-SP/2 Suitable for cable OD 2*4.0mm2 Application for Module

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material301 stainless steelColor White Package100PCS//bag 500PCS//bagAmbient temperature range-40℃…+85℃(IEC） SCC-ST/4 Suitable for cable OD 4*4.0mm2 Application for Module

Solar cable management clip Product specifications Solar Cable Clips are smart designs for fixing cables on solar panels shall not lay on roofs or floors with clips which simplify wire management and create a cleaner aesthetic to solar PV arrays. They are made of stainless steel 301 which makes them durable, long lasting and reliable solution for all environments. They are easy to be installed and can be reused. This cable clips can be used in wide variety of mounting configurations for module and rail applications. Customs designs and package available upon request for OEM. Made with corrosion resistant 301 stainless steel or spring grade stainless steel; Dual or four wire compartments; Wide variety of mounting configurations; Accommodation for a broad range of cable combinations and sizes (e.g., PV, AC module and micro inverter cables); Special tab for easy installation & removal without any tool; Coined edges to prevent damage to cable insulation.

Stainless Steel Welded Wire Mesh Fencing

for gas burners meeting DIN 30665*spiraling stainless steel wire core (buckling resistance)*working pressure up to 100 mbar

The special brushes have a variety of brushes. We carry some spotting brushes in various sizes and cutlery materials. So we can bristle brushes with bronze, brass or stainless steel wire. But also hat cleaning brushes or leather cleaning brushes can be found here with us.

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material: 301 stainless steelColor: White Package: 100PCS//bag 500PCS//bag Ambient temperature range: -40℃…+85℃(IEC） SCC-CT Suitable for Cable Tie With≤7mm Application for Module Bundle

Solar Cable Clip (Please inquiry for details about various models) Product Specifications Material: 301 stainless steelColor: White Package: 100PCS//bag 500PCS//bag Ambient temperature range: -40℃…+85℃(IEC） SCC-90/6S/4 Suitable for cable OD: 90Degree 4*6.0mm2 Application for Module 90 Degree

We use many different welding methods to produce endlessly spliced conveyor and process belts, always depending on the material and intended application. The endless splice punched finger splice stepped finger splice multilayered stepped splice conical splice The mechanical fastener Steelgrip fasteners, stainless steel Wire hooks, steel or stainless steel Polyester zip splice Self-lock fastener, stainless steel Plastic splice Nieka fastener Bonded wire hooks PVC/PU Minet fasteners

CSN® Neutral Earthing Resistors are used in power distribution systems for star point earthing of transformer or generator windings. According to the application (low or high ohmic neutral earthing type) pakkages made out of meander shaped stainless steel wire elements or CSN® Resistor Webs will be used as active material. Schniewindt has already supplied units for system voltages up to 380 kV and earth fault currents up to 70 kA. CSN® Neutral Earthing Resistors provide optimal solutions for your applications high or low resistance values outdoor or indoor operation reliable, nearly maintenancefree technology compact design with high power density reliable performance at all system voltages Every single CSN® Neutral Earthing Resistor is manufactured according to individual customer requirements.