Results for
3AS STAINLESS STEEL C.J.S.C.
Turkey
- AUSTENITIC ALLOY SHEETS GRADE: AISI 201 / 301 / 304 / 304L / 310 / 310S / 316 / 316L / 316TI / 321 MEASUREMENT: THICKNESS: 0.4 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO - FERRITIC ALLOY SHEETS GRADE: AISI 409 / 430 / 434 MASUREMENT: THICKNESS: 0.40 mm - 6 mm WIDTH: 350 mm - 1600 mm LENGHT 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO -DUPLEX GRADE: AISI 2205 / 2001 MEASUREMENT: THICKNESS: 0.40 mm – 3mm WIDTH: 350 mm - 1600 mm LENGHT: 300mm - 6000 mm FINISH: 2B, BA, 3N, 4N, 5N, SCOTCH BRITE, HAIRLINE, DUPLO
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2R Surface condition: bright annealed Standard: EN 10088 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, Laser protection film/without stamp, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: cold-rolled, 2R Surface finish: bright annealed Norm: EN 10088-1-2-3 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: Standard film, no film, laser protection film
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 4 - 15 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Stainless steel Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2J Surface finish: brushed Ground sites: on one side Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1.5 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2G Surface finish: ground Grain: 240 Ground sides: both sides Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1.5 - 5 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, laser protection foil
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.5 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4541 (X6CrNiTi18-10) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 3 - 12 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 0.8 - 6 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Method of manufacture: hot-rolled, 1D Surface finish: pickled Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 4 - 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 Dimensions: Thickness (mm): 0.4 - 8 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000 Foliation: Foil 4228, no foil, laser protection foil, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4016 (X6Cr17) Type of manufacture: cold-rolled, 2J Surface finish: brushed Ground side(s) one-sided Laminated page(s): one-sided Standard: EN 10088-2 Dimensions: Thickness (mm): 0.8 Length (mm): 2,500 Width (mm): 1,250
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4828 (X15CrNiSi20-12) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10095 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 1 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: hot-rolled, 1D Surface finish: ground Norm: EN 10088-2 Ground sites: on one side Grain: Grit 240 Dimensions: Gauge (mm): 10 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4462 (X2CrNiMoN22-5-3) Manufacturing method: cold-rolled, 2E Surface finish: mech. descaled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 2 - 3 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4016 (X6Cr17) Manufacturing method: cold-rolled, 2B Surface finish: pickled Norm: EN 10088-2 Dimensions: Thickness (mm): 3 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Factory filming: no film, no paper
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of production: cold-rolled, 2J Surface finish: brushed Ground sides: one-sided Standard: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 6 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500 Foliation: Foil 4228, standard foil, laser protective foil
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4301 (X5CrNi18-10) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 3 - 12 Length (mm): 2,000 - 6,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4541 (X6CrNiTi18-10) Manufacturing method: cold-rolled, 2B Surface finish: cold-rolled pickled Norm: EN 10088 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 1 - 4 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4404 (X2CrNiMo17-12-2) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Gauge (mm): 3 - 12 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Form: sheet Material: 1.4571 (X6CrNiMoTi17-12-2) Manufacturing method: hot-rolled, 1D Surface finish: pickled Norm: EN 10088-2 eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 3 - 12 Length (mm): 2,000 - 4,000 Width (mm): 1,000 - 2,000
Request for a quoteKLÖCKNER & CO DEUTSCHLAND GMBH
Germany
Shape: sheet Material: 1.4301 (X5CrNi18-10) Type of manufacture: cold-rolled, 2G Surface finish: ground Standard: EN 10088-2 Grain: Grit 320 Ground sides: one-sided eClass 9.1: 35010511 UNSPSC 11.2: 30102505 Dimensions: Thickness (mm): 0.8 - 2 Length (mm): 2,000 - 3,000 Width (mm): 1,000 - 1,500
Request for a quoteUCEL STAINLESS STEEL
Turkey
quality 300 series 400 series surface : BA - 2B - SB + NO:4 thickness : 0,30 - 6,00 mm width : 1000 / 1250 / 1500 mm lenght : 2000/ 2500 / 3000 mm
Request for a quoteSHENZHEN HONGSUN PRECISION TECHNOLOGY CO., LTD
China
Laser cutting welding stainless steel 304 sheet metal cover for machinery parts
Request for a quoteSHENZHEN HONGSUN PRECISION TECHNOLOGY CO., LTD
China
Laser cutting welding stainless steel 304 sheet metal cover for machinery parts
Request for a quoteSC PROFINOX SRL
Romania
We provide laser cutting services for stainless steel or aluminium sheets and pipes. High precision and fast execution are ensured by high-performance equipment and the experience of the Profinox team! Our laser cutting services have a number of benefits: Versatility – the tool can be used for a wide range of materials, with Profinox providing laser cutting services for stainless steel, aluminium or copper sheets and pipes; The power used for the laser metal cutting process is lower; The laser cutting procedure involves minimal deformation; Low costs for laser cutting; No contact between the part and the tool; Enhanced surface quality; Minimal burrs: this advantage provided by the laser metal cutting process also eliminates the need for further machining; Possibility to create and obtain complex shapes. Furthermore, the laser cutting process is silent and fast, ensuring a high precision of +/- 0.1 mm. If you have materials exceeding the maximum
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our Infrared ovens can be produced as conveyor belt tunnel or internal return (U) type. Our ovens have andirect heating system with radiation heat transfer. They are used due to the cure flat shaped parts after wet or powder coating paint applications. They are preferred because they can cure the paint three times faster than the convectional type ovens. They can be produced with natural gas or lamp type infrareds. The inner surfaces of our ovens’ panels are produced with a galvanizedor stainless steel sheets and the outer surfaces are produced with galvanized sheet steel coated with electrostatic powder paint. Considering the application temperature, the required thicknesses determined and rock wool or glass wool is used for insulation.
Request for a quoteROTA MACHINERY MANUFACTURING CONTRACTING
Turkey
Our wet painting booths are manufactured as standard or custom design according to the customer’s needs. For the cabin selection, the dimensions of the parts and the targeted capacity are the determining elements. Our booths are made of stainless steel or galvanized sheet and fully assembled with bolts. In our wet painting booth with water curtain, the air is sucked through the water curtain by exhaust fans while the unused wet paint is held by water. And the clean and healthy environment is created by supplying the fresh air to the environment. Teflon (non-stick), solvent based and water based paint applications can be applied in our wet painting booths. We also design Flash off and Positive Pressure rooms for our wet paint plants. In flash off rooms, solvent separation process of painted parts is done. The solvent that released in these rooms is removed by exhaust fans and a healthy working environment is obtained.
Request for a quoteResults for
Stainless steel sheets - Import exportNumber of results
226 ProductsCountries
Category