Stainless steel reinforcement - Import export

Minimalistic sliding system specially suitable for large dimensions, which allows to have the maximum luminosity with the minimum visible section of aluminium, and makes possible to cover great openings with a glass surface of 94%. Its extraordinary glazing capacity allows to place glasses of up to 54 mm thickness which guarantees the best acoustic and thermal performance in a system with these characteristics. It is available in configurations of fixed and sash, 2 and 4 sashes, and the maximum dimensions are 4.000 mm/sash width/ height.. It has a visible section of just 25 mm and the possibility to inlay totally the bottom, lateral and top frames. It counts with the possibility of motorized opening for weights up to 700 kg, and manual opening for up to 400 kg. Additionally, it allows to place multipoint lock systems by operating rod, with or without key. The rollers are placed in the frame, and the sashes count with a stainless steel reinforced

» Minimalist sliding system specially suitable for large dimensions (up to 4,000 mm/sash of width or height) » Possible to cover great openings with a glass surface of 94% » Visible section of just 25 mm » Outstanding thermal and acoustic performance » It comes with the possibility of motorised opening for sashes up to 700 kg, and manual opening for up to 400 kg. Additionally, it allows to place multipoint lock systems by operating rod, with or without key » The rollers are placed in the frame, and the sashes count with a stainless steel reinforced rolling area which makes the sliding movement smoother » Possibility of corner sash encounters at 90º without needing a mullion » The motorised version allows to completely hide the sash within the frame in closing position » Maximum glazing thickness 56 mm » Opening possibilities Sliding of 2, 4 or 6 sashes Up to 4 rail configurations 1 sash + 1 fixed / 2 sashes + 1 fixed

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

solidian GRID is textile reinforcement made from various fibers such as carbon, glass, basalt, or hybrid and therefore is ultralightweight. Compared to classic steel reinforcement, solidian reinforcements have up to 7 times higher tensile strength and do not corrode. Our reinforcements are extremely versatile and can be used in areas where usually only stainless steel reinforcement or structures with increased concrete cover are used. solidian reinforements require only the minimum concrete cover and thus contribute to savings in material and transport costs. For much more information visit our website.

Oil hoses in inch and dash sizes. With or without stainless steel coating for normal and high temperature applications.

The range in the graphite seals segment is not limited to rings and tapes, but also includes sheets: The many advantages of billi graphite sheets include the low permeability of liquids and gases as well as high resistance to chemical substances. In addition, the plates made of natural graphite convince for their enormous stability and high resistance to temperature fluctuations. The graphite sheets can be ordered in different versions so that the perfect items are available for every application: For example, you can choose from models without steel reinforcement, with plain steel inserts and tanged stainless steel reinforcement. All graphite gaskets from our company are convenient for the targeted interaction between a high quality standard and improved health protection: you can order asbestos-free graphite sheets and many other types directly from us at a reasonable price.

The Gmöhling serving trolley is modular in structure and thoughtfully designed to the very last detail. We offer trolleys with 2, 3 or 4 shelves. The height and number of shelves can also be changed. The shelves are also available in 2 versions: in aluminium or stainless steel. To cut transport costs, we offer our serving trolley in an unassembled basic version for easy self-assembly. The serving trolley, also referred to as a shelf trolley, is used for serving, transport and temporary storage. A practical aid for use in kitchens, laundries, hospitals, old people's homes, companies and various institutions. Polished stainless steel trays, with reinforced edges Load capacity: max. 60 kg per tray 2 anodised aluminium square pipe pushbars 5 mounting positions allow variable spacing between trays Trays are screwed to pushbars 4 rubber deflector castors, dia. 100 mm, grey 4 swivel castors, wheel die. 125 mm, non-marking thermoplastic rubber wheels, galvanised steel forks with plain...

Compact and powerful actuator for automated positioning jobs Easy mounting, no additional coupling needed. Stainless steel hollow shaft, glass fibre reinforced casing. Brushless 24 VDC motor with long service life. Solid absolute sensor, magnetic sensing technology. 2-line LCD for target and position value and operating keys. 2 LEDs for user guidance. Integrated RS485 or CANopen interface. Integrated positioning controller. M8 + M12 component mounting technology.

Fieldbus Profile AG06 Fieldbus: easy mounting, no additional coupling needed stainless steel hollow shaft, glass fibre reinforced casing brushless 24 VDC motor with long service life solid absolute sensor, magnetic sensing technology 2-line LCD for target and position value and operating keys 2 LEDs for user guidance integrated RS485 or CANopen interface Integrated positioning controller M8 + M12 component mounting technology

Suitable for kitchens and food laboratories. Available with depths from 600 to 800 mm and width from 400 to 2000 mm. PROFESSIONAL TABLES IN STAINLESS STEEL AISI 304 - MADE IN ITALY - WITH UNDERCOUNTER Professional work tables made entirely of high quality aisi 304 stainless steel with satin finish, according to the current food and sanitary regulations. The upper shelf has a thickness of 10/10 with corners welded on all edges for greater operator safety, is soundproofed and reinforced with a 25 mm thick waterproof wood panel and transverse reinforcements made of high-strength stainless steel. The lower floor is reinforced and soundproofed at high capacity. The structure is in high-flow stainless steel tubular 50×25 mounted on 40×40 legs with stainless steel feet adjustable in height from mm. 850 to 900. Tables can be purchased in depths of 600, 700 and 800 mm and with widths of 400, 500, 600, 700, 800, 900, 1000, 1100, 1200, 1300, 1400, 1500, 1600, 1700, 1800, 1900 and 2000 mm.

Stainless steel stop with plastic reinforcement Extruded aluminum impact plate with rubber Easy right/left conversion Innovative Quick-Fix fastening Adjustable for 40-60 mm gate profiles For rectangular and round profiles

Bossong injected anchors with sock and Presstec grout with RBOS bars. Injected multibars anchors with sock and Presstec grout with RBOS bars. Stainless steel reinforced bars. On demand carbon steel bars.

Low-noise, high-quality and high-speed ball chain (patented). The WRC ball chain (patented) design offers high contact area between the balls and the chain, which helps keep the lubricant film intact, hence allowing high-speed and low-noise operations with extended service life. — Dustproof design: The completely sealed design helps prevent dust ingress and reduce lubricant loss, which leads to extended service life. — O-type arrangement: The 4-row re-circulating balls design helps achieve equal load capacity in all four directions. — Patented design for high speed/impact: The L-shaped stainless-steel reinforcement plates with bottom latches help cover and strengthen the end caps, allowing high-speed/impact operations.

Vertical cylindrical on feet Eccentric conical dome Conical bottom slope 38 % Interior and exterior finish glazed 2B Decentered chimney Ø 400 mm and height 300 mm ELICA 316L stainless steel antiretention hatch 3 simple male DIN 80 fittings on the dome Double acting ELICA 1000 HL stainless steel 316L valve, horn mounting 5 lifting rings including 1 at the bottom of the tank Support + manufacturer's plate 1 single male DIN 65 fitting in ferrule 1 single male DIN 65 fitting in ferrule Taken from the ground 5 thermal regulation rings with water I / O sleeve 4.75 m2 5 heating rings with water I / O sleeve 4.75 m2 Total thermoregulation area 9.5 m2> Thermoregulation ratio per 100 HL 6.31 m2 Tapered connection + stainless steel faceplate for agitator mounting Full stainless steel buffer + EPDM seal for stirring nozzle stirring Total drain pipe + male at the end of DIN 65 piping 4 outside legs, tank height 800 mm Stainless steel flat reinforcement belt 150 x 5

Upgrade your ABS-Lock X anchorage point for usage as a corner or end support in a lifeline system. This additional stainless steel reinforcement (Ø 42 mm) includes an energy absorber and is capable of withstanding the pre-tensioning load exerted on your stainless steel cable. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end support in a lifeline system Includes an energy absorber

This reinforced, stainless steel anchorage point - designed for concrete applications - does not create any tension in the substructure and is suitable for unprotected surfaces. It includes a base plate (150 x 150 mm) and a welded-on supporting tube (Ø 42 mm) for extra stability and is installed using the 4 anchor rods supplied. All you need is an installation depth of a mere 60 mm. EN 795:2012, A + CEN/TS 16415:2017 Base plate + welded-on supporting tube Concrete ≥ C20/25 For installation depths ≥ 60mm Recommended accessories: Special Adhesive WIT-VM-250 Incl. stainless steel installation set

This reinforced, stainless steel anchorage point (Ø 16 mm) comes with a special supporting tube (Ø 42 mm) and includes an angular plate for lateral installation. Simply drill 2 holes through a load-bearing beam to install it. Our standard package includes threaded bolts and nuts for countering. EN 795:2012, A + CEN/TS 16415:2013 Angular plate for lateral installation Designed for load-bearing wooden structures Minimum beam dimensions: 100 mm x 200 mm Incl. stainless steel installation set

Sheet gasket from expanded graphite with tanged stainless steel foil reinforcement Characteristics Graphite gasket reinforced with a 0.1 mm tanged stainless steel insert and a purity of 98 %. Practically no cold flow or creep under temperature Excellent in use at cycling temperatures High blow out safety Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 100 bar Main application Robust graphite gasket applicable in all industries and as well approved to seal older equipment. Suitable for In all industries Approvals BAM DVGW FIRESAFE Variant Economic grade alternative D 5.1 in 0.1 mm 316 tanged stainless steel sheet reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in thickness of 1.5 / 2.0 /3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

High temperatur sheet gasket from expanded graphite with stainless steel foil reinforcement Characteristics One layer of 0.05 mm stainless steel carrier (3 mm thickness 2 layers) with graphite on both sides fixed by a special only 10 µm thick adhesive coating. Purity 98 % Practically no cold flow or creep under temperature Excellent in use at cycling temperatures Very good sealability even at low gasket stress. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 40 bar Main application Suitable for sensitive flange connections Housings of pumps and fittings Suitable for In all industries Approvals BAM DVGW Variant Economic grade alternative D 5.2 with 0.05 mm stainless steel foil reinforcement Form of delivery Gasket sheet size of 1,000 x 1,000 mm in der Dicke 0.55 / 0.75 / 1.0 / 1.5 / 2.0 / 3.0 mm or cut gaskets according to drawing, or EN and international Standards. Special dimensions on request.

Sheet gasket from expanded graphite with multilayer stainless steel foil reinforcement Characteristics Premium graphite gasket, reinforced by 0.05 mm multilayer stainless steel carriers in an adhesive free sandwich compound with the graphite layers. Purity 99.8 % High blow out safety and mechanical strength Practically no cold flow or creep under temperature Non hardening Excellent in use at cycling temperatures Reduced Emissions due to high sealability Built in safety against assembly and operational problems. Technical parameters pH 0 - 14 Temperature: t = -250 … +550 °C, in oxidizing atmosphere 450 °C Pressure: p = 250 bar Main application Highly recognised as problem solving gasket material in all industries with higher pressures and temperatures and the demand on operation safety and sealability Suitable for In all industries Approvals BAM DVGW TA Luft FIRE SAFE API 607 Variant Economic grade alternative D 5.3 with multiple 0.05 mm stainless steel foil...

High Temperature Gasket of Expanded Flexible Graphite with Stretchmetal Characteristics Expanded graphite sheet gasket with Stainless Steel stretch metal reinforcement and a purity of 99 %. Practically no cold flow or creep under temperature. Non hardening Excellent in use with cycling temperatures. Blow out safe due to 3 dimensional reinforcement matrixes Optimized transfer of sealing stress Safe use even with small sealing width Minimized risk of separation known from multilayer reinforced gasket sheets. Technical parameters pH 0 - 14 Temperature: t = -200 … +550 °C, n oxidizing atmosphere +450 °C Pressure: p = 200 bar Main application Universal use as problem solver in all industries when demanding higher operation safety and sealability especially in older plant equipment. Suitable for Chemical industry Petrochemical plants Pharmaceutical industry Power plant technology Paper industry Sugar industry Approvals DVGW BAM TA Luft FIRE SAFE API 607 on request Form of...

Inch sized UNF helicoidal thread inserts in stainless steel (helicoils) Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. Allow to restore a damaged thread to its initial size, ensure extremely reduced intervention time The reduced diameter of the first turn ensures that the thread insert can be placed into a hole like a regular screw For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

Inch sized UNC helicoidal thread inserts in stainless steel (helicoils) Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. Allow to restore a damaged thread to its initial size, ensure extremely reduced intervention time The reduced diameter of the first turn ensures that the thread insert can be placed into a hole like a regular screw For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

Metric helicoidal thread inserts in stainless steel (helicoils) Reinforce the thread in low shear strength materials, such as aluminum, aluminum alloys, etc. Allow to restore a damaged thread to its initial size, ensure extremely reduced intervention time The reduced diameter of the first turn ensures that the thread insert can be placed into a hole like a regular screw For installation you may use taps and tools available in this sections: Thread insert taps, Installation tools for thread inserts Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and selftapping bushes, which have always been recognized by the market as products of excellent quality

The Sonic Equipment NEXT S9 toolbox is a recommended solution for technicians looking for a basic to intermediate toolset. What makes this toolbox our bestselling and recommended unit is not only its size in height, but it’s advantage of space savings design at only 83cm in width and 52cm in depth. This combination of overall size matched with its storage space allows this box to be the #1 choice within the range. Reinforced stainless steel worktop with integrated side pockets Spray can holder and paper roll holder 4 heavy duty casters with 300kg loading capacity each 7 shallow drawers, and 1 deep drawer Shallow drawers are equipped with 60kg telescopic ball bearing slides Deep drawers are equipped with 120kg double slides Advanced drawer blocking system for anti-tilt protection Total loading capacity of 900kg