Square flanges - Import export

For welding with tube 40 x 40 mm For screwing on Rustproof due to stainless steel AISI 304

The range of square-flanged incremental encoders includes the series RE620, with centering mask diameter 31.75 mm, compatible with the international standard SIZE25, and the series RE650, with centering mask diameter 50 mm. Both the types are housed in a metal case. The connection type and position can be chosen among different options, as well as the output signal formats and the shaft diameters. The pulses per revolution number ranges from 2 to 12500. The zero reference pulse option is available for both series (type RE621 – RE651).

drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis Move linear torque resistant, completely lubrication-free. The drylin® Q linear construction kit offers the user maximum flexibility in the design Individual housing options such as solid plastic bearings and adjustable complete housings with and without manual clamp are available. Due to the hollow chamber design, the rugged hard-anodised aluminium profile is very light and is suitable for the simultaneous conducting of supply cables. The mounting options are highly variable, among others, using slot nuts; installation size 20 can also combined with all 20/20 aluminium construction profiles. 1. Profile made of hard-anodized aluminum 2. Main body of the carriage made of aluminum 3. Customized clearance adjustment 4. Cover made of solid plastic 5. Gliding elements in high-performance polymer iglidur® J serve as a guide bearing and guarantee optimum running properties drylin® Q Square linear guides Square section tube made of hard-anodized aluminum Torque resistant without 2nd guidance Tolerates moments up to 10 Nm drylin® Q square section tube drylin® Q - bearing housing, adjustable Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually drylin® Q - bearing housing drylin® Q - bearing housing, adjustable with hand clamp Carriage version for all unsupported solutions Force absorption from all directions Anti-rotation Clearance is continuously adjustable manually With manual clamp drylin® Q - bearing housing with manual clamp drylin® Q - housing bearing Q20 enclosed, anodized aluminium housing short design or tandem housing Torque resistant without 2nd guidance drylin® housing bearing Q20 drylin® W - flange bearing Flange pillow block made of anodized aluminum Round flange (01 version), square flange (02 version Standard type or tandem housing Torque resistant without 2nd guidance drylin® W - flange bearing drylin® Q - housing bearing Q10 Solid polymer bearing made of iglidur® J Very light Tolerates moments up to 3 Nm Space saving drylin® Q - housing bearing Q10 drylin® Q - accessory Based on a torque resistant square guide with 7.5 mm edge lengths Hollow chamber for supply lines (media, compressed air,cable) drylin® Q - accessory drylin® Q - gripper axis Toothed, hard-coated and corrosion protected square-hollow profile Move loads up to 500 g at speeds of up to 0.7 m/s Bearing made of iglidur® J Drive: NEMA11 stepper motor with gear wheel drylin® Q - gripper axis

Housing steel. Cage plastic. Balls steel. Note The linear ball bearings correspond to series 3 of ISO 10285. With doublesided seal. The linear ball bearings have a plastic cage which results in quiet and outstanding running properties. With flange for direct mounting on the housing. Linear ball bearings with doublesided seal should be greased before installation. The specified load ratings apply with the use of hardened and ground shafts. Precision guide shafts 21595. Fastening screws 07160.

At Steeling, we take pride in offering a wide range of high-quality nuts. Our nuts are meticulously engineered to ensure optimal performance and stability in various applications. Whether you need nuts for industrial, automotive, or construction purposes, we have you covered. Comprehensive Range of Nut Types We offer a comprehensive range of nut types to meet your specific requirements. Some of the nut types we provide include: ASME B18 2.2 Hexagonal Nuts DIN 439-2 Hexagonal Nuts DIN 557 Square Nuts DIN 6923 Flanged Nuts DIN 928, DIN 929, DIN 934, DIN 936 Hexagonal Nuts DIN EN 14218 Flanged Nuts With such a diverse range of nut types available, we are confident that you will find the perfect solution for your specific needs. Place Your Nut Order If you are interested in purchasing our nut products, we encourage you to get in touch with our sales team. You can easily place your order by sending an email to sales@steeling.net.

The incremental encoders series REV ensure high performances in terms of reading accuracy and signal stability. The aluminium housing offers an excellent protection against environmental agents and makes them suitable for applications in harsh environments. They can be supplied with round clamping or sychro flange, or square flange.

The small size encoders series RE40 feature great accuracy, compact size and stoutness. The incremental encoder RE40 can be supplied with different mechanical flanges: the type RE40 has 6 fixing holes on diameter 30 mm, while the encoder E40V has a front fixing screw, and the series RE40Q is provided with a square flange of mm 43×43. The types RE40M and RE40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (RE40 or RE41). The aluminium housing, with axial or radial cable gland, grants IP65 protection degree against environmental agents.

Compact sized encoders series REC fit to any application where short body dimensions are required – the case length only measures 38 mm. REC encoders are available with different mechanical versions: with round flange and servo copling (type REC520/REC540), square flange (REC620) or hollow shaft, with (REC450) or without elastic support(REC440). The case is out of strong aluminium and connections are ensured by the connector type M12, or optionally by cable. The encoder with M12 connector output is UL Listed for the canadian and US markets. The pulses per revolution number ranges from 2 to 12500.

The encoders series MEM can be supplied in single or in multiturn version, with high resolution values: up to 13 bits info/revolution (corresponding to 8192 info/rev.) x 15 bits rev. (corresponding to 32768 rev.), in binary or Gray code. The multiturn encoders provide the SSI serial output signal, while the singleturn type offer two output options: SSI or push pull parallel signal. Several mechanical versions are available to satisfy all application requirements: round flange, square flange, hollow shaft, with different options for the shaft diameter and connection position and type.

Elap encoders MEM-Bus EtherNet/IP can be easily integrated in any EtherNet/IP net, as they comply with all EtherNet/IP interface requirements, according to directives IEC61784-1. The encoder features the encoder profile 22H according to CIP™ protocol specifications.The encoders are ODVA conformant certified, including CIP Sync certification.MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments. MEM-Bus EtherNet/IP are UL certified for the Canadian and United States market.

Absolute encoders MEM-BUS EtherCAT comply with Profile CANopen over EtherCAT (CoE), Cia DS-406. They avail on EtherCAT conformance certification and are UL Listed for the canadian and US market. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged with servo coupling, and with hollow shaft to couple directly to a motor shaft; all the types offer different options for the shaft/hole diameter. The electrical connection is by 3 M12 connectors. Reduced cabling and easy configuration – each slave is addressed automatically – simplify the installing operations. The stout aluminium case ensures a high protection degree, so that it is possible to apply MEM-Bus encoders in severe industrial environments.

The small size encoders series E40 feature great accuracy and compact size. The incremental encoder E40 can be supplied with different mechanical flanges: the type E40 has 6 fixing holes on diameter 30 mm, while the type 40A has 4 holes on diameter 25.4 mm; the encoder E40V has a front fixing screw, and the series E40Q is provided with a square flange of mm 43×43. The types E40M and E40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (E40 or E41). The series standard case is out of ABS plastics, with axial or radial cable or connector outlet; series RE40 with aluminium housing and IP65 radial cablepress outlet is also available.

Elap absolute encoders series MEM-Bus comply with the Encoder Profile Specifications V4.1 version 3.162 related to Profidrives. They fulfil the requirements of the Application Classes 3 and 4,that is they provide all functions for scaling factor, preset, rotational direction, positioning and speed values, diagnostic. MEM-Bus encoders support the RT Real Time and IRT Isochronous Real Time transmission mode, thus ensuring fast, accurate and safe data transfer. Besides standard telegrams 81, 82, 83, 84 Elap encoders support the user telegram 860, featuring Profibus telegram, a peculiarity which simplifies the encoder handling, as well as the possible migration from Profinet devices. MEM-Bus encoders are supplied in multiturn version with 29 bit resolution (8192 steps/revolution x 65536 revolutions). Different mechanical versions are available to satisfy all application requirements: square flanged, round flanged, with solid or hollow shaft.

Housing units of ASK offer you various possibilities of applications. Discover the different series of ASK bearing units: pillow blocks, two-bolt flanges, square flanges, take-up units, cartridges, flange cartridges. Find out about the different materials. We are pleased to assist you.

304 stainless steel tank STOBPTR2500 model Rounded bottom conical roof Circular door diameter 400 mm flush with the bottom of the shell Top hatch diameter 400 mm centered Total emptying with 100x100 square flange and 40 Mâcon stainless steel ball valve Partial drain with 100x100 square flange and 40 Mâcon stainless steel ball valve 3 adjustable stainless steel feet 400 mm high Level valve with stainless steel protection 3/8 "tasting tap Clock thermometer Cooling belt height 500 mm Probe socket 400 mm from the bottom of the shell Manufacturer's plate

304 stainless steel tank Model STOBP2500 Total capacity 2623 litres Curved bottom Conical roof Circular door diameter 400 mm flush with the bottom of the shell Upper door diameter 400 mm centred Total drain with 100x100 square flange and 40 MÂCON stainless steel ball valve Partial drain with square flange 100x100 and stainless steel ball valve 40 MÂCON 3 adjustable stainless steel feet, height 400 mm Level tap with stainless steel protection Taster tap DIN 15 Ladder support bar Manufacturer's plate

304 stainless steel tank STOBPTR1700 model Rounded bottom conical roof Circular door diameter 400 mm flush with the bottom of the shell Top hatch diameter 400 mm centered Total emptying with 100x100 square flange and 40 Mâcon stainless steel ball valve Partial drain with 100x100 square flange and 40 Mâcon stainless steel ball valve 3 adjustable stainless steel feet 400 mm high Level valve with stainless steel protection 3/8 "tasting tap Clock thermometer Cooling belt height 500 mm Probe socket 400 mm from the bottom of the shell Manufacturer's plate

Flat inclined bottom slope 4% Stainless steel DIN 15 tasting tap Level valve diameter 20 with stainless steel protection Partial drain with 100x100 square flange and 40 Macon outlet valve Total drain with square flange 100x100 and valve outlet 40 Macon Rectangular door 420 x 530 mm positioned at the bottom of the ferrule NEW MODEL with 5 adjustable stainless steel feet (H. 625 mm) Complete air kit with pump and pressure gauge 316L stainless steel floating hat Gallows Lifting winch Clock thermometer Probe socket Stainless steel ladder support bar Vacuum lifting rings Cooling coil with 5 turns on the shell H. 710 mm Cooling coil with 2 turns on the shell H. 300 mm

Model SPABP 1600 Full floating hat INOX 316L Swivel stem Circular door diameter 400 mm positioned flush with the bottom of the shell Partial and total emptying with square flange 100 x 100 with stainless steel ball valves on 40 macon outlet flange, full bore Stainless steel DIN 15 tasting tap 3 adjustable stainless steel feet H. 400 mm Pump and pressure gauge Level valve 20 mm diameter with stainless steel protection Stainless steel ladder support bar Gallows Clock thermometer Cooling belt H 500 mm probe socket Diameter 1200 mm Height (without stem) 1900 mm Total height (with stem) 2410 mm

Complete floating cap STAINLESS STEEL 316L Swivel arm Circular door diameter 400 mm positioned flush with the bottom of the shell Partial and complete emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 mâcon, full passage Stainless steel tasting tap DIN 15 3 adjustable stainless steel feet H. 400 mm Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 1900 mm Total height (with bracket) 2410 mm

TECHNICAL SPECIFICATIONS - Reference : 004661 - Model : SPAIP5000SER - Effective capacity : 4880 Litres - 304 stainless steel wine rack - Flat bottom with 4% slope - DIN 15 stainless steel tasting tap - Level tap diameter 20 with stainless steel protection - Partial drain with 100x100 square flange and MACON 40 outlet valve - Total drain with 100x100 square flange and MACON 40 outlet valve - Rectangular door 420 x 530 mm positioned at bottom of shell - 3 adjustable stainless steel feet (500 mm high) - Air kit complete with pump and pressure gauge - Air float complete in 316L stainless steel - Gallows - Lifting winch - Clock thermometer - Probe socket - Stainless steel ladder support bar - Vacuum lifting rings - Cooling coil with 4 turns on shell H. 560 mm - Cooling coil with 2 turns on shell H. 300 mm DIMENSIONS - Height 3700 mm (with jib) - Height 3000 mm (without bracket) - Outside diameter: 1666 mm - Inside diameter: 1600 mm

304 stainless steel tank Model SPABP2800 Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Stem Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm

Model SPABP2800 304 stainless steel tank Full floating cap INOX 316L Swivel stem with stainless steel handle Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage Round door Diameter 400 positioned flush with the shell bottom DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2900 mm Total height (with stem) 3410 mm

Brushed exterior finish Interior mirror polished finish Upper hatch Ø 400 mm + 2 turns around the door H. 300 mm Probe socket Positioned flush with the ferrule bottom Stainless steel DIN15 tasting tap Ø 20 level valve with stainless steel protection Stainless steel ladder support bar Vacuum lifting rings Clock thermometer Clear draft and total emptying with stainless steel ball valves on 100x100 square flange Exit 40 MACON

304 stainless steel tank Model SPABP2150 Full floating cap INOX 316L Swivel stem Circular door Diameter 400 mm positioned flush with the shell bottom Honeycomb cooling belt H. 500 mm on the ferrule Clock thermometer and thermowell Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm

304 stainless steel tank Model SPABP2150 Full floating cap INOX 316L Swivel stem Circular door Diameter 400 mm positioned flush with the shell bottom Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 macon, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910mm

Model SPABP2150 Full floating cap INOX 316L Swivel stem Partial emptying and total emptying with square flange 100 x 100 with stainless steel ball valves on flange outlet 40 MACON, full passage DIN 15 stainless steel tasting tap 3 stainless steel feet H. 400 mm adjustable Pump and pressure gauge Level tap diameter 20 mm with stainless steel protection Stainless steel ladder support bar Diameter 1200 mm Height (without stem) 2400 mm Total height (with stem) 2910 mm>

TECHNICAL CHARACTERISTICS - Model : STOIP SER 2500 SPEC - Effective capacity : 2547 litres - Brushed exterior finish - Mirror-polished interior finish - Top door Ø 400 mm - Cooling coil: 4 turns H. 560 mm + 2 turns around the door H.300 mm - Socket for probe - 3 adjustable stainless steel feet H: 500 mm - Rectangular door: 420 x 530 mm - Positioned flush with the bottom of the shell - Stainless steel taster tap DIN15 - Level tap Ø 20 with stainless steel protection - Stainless steel ladder support bar - Vacuum lifting rings - Thermometer with clock - Clearance and total emptying with stainless steel ball valves on 100x100 square flange - Outlet 40 MACON DIMENSIONS - Diameter: 1400 mm - Height : 2445 mm

304 stainless steel tank SPAIP SER 2300 model 304 stainless steel wine keeper Flat bottom with 4% slope Bottom thickness 2.0 mm ferrule 1.5 mm 316L stainless steel floating hat Complete pneumatic system 6419 Swivel crane with stainless steel handle Floating hat lifting winch 3 stainless steel feet H. 500 mm adjustable + 80 mm adjustable Rectangular door 420x530 mm positioned flush with the bottom of the ferrule Swivel crane with stainless steel handle Cooling coil with 4 rings on the ferrule 2 additional cooling rings on the door Thermowell for probe positioned at the back of the tank Clock thermometer with thermowell Stainless steel DIN 15 tasting tap Level valve Diameter 20 with stainless steel protection clear draft and total drainage with square flange 100 x 100 + ball valve on flange outlet 40 MACON Lifting rings Stainless steel ladder support bars Diameter 1400 mm Height (shell) 1500 mm Height (total) 2600 mm (with stem)