Results for
SPIROL
Germany
In addition to SPIROL Standard Metric Slotted Spring Pins, SPIROL offers a line of ISO 8752 Slotted Pins to meet market demand for these pins. SPIROL offers Slotted Spring Pins manufactured to the ISO 8752 specification in diameters ranging from 2mm to 12mm in both high carbon steel and austenitic stainless steel in plain finish. ISO 8752 Slotted Pins are not available with supplemental coatings such as zinc plating or passivation due to their propensity to interlock during the finishing process.
Request for a quoteSPIROL
Germany
SPIROL Standard Slotted Spring Pins SPIROL Standard Slotted Spring Pins have a slot width narrower than the wall thickness and thus do not nest or interlock. This feature, combined with a smaller expanded (pre-insertion) diameter, results in a number of advantages for SPIROL Standard Slotted Pins compared to ISO 8752 pins including: • Lower insertion force and smoother insertion. • Rounder pins, which in turn results in better conformance of the pin to the hole wall and eliminates the edge of the slot damaging the hole during insertion. • Lower stress in the spine of the installed pin. This results in longer pin life in shock or fatigue applications. • Ability to use automatic vibratory feeding of pins for installation without interlocking. • Plating of pins for additional corrosion resistance or appearance without “touch marks” or the bonding of nested pins. Please visit www.SPIROL.com to learn more!
Request for a quoteSPIROL
Germany
SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid vapors, chlorides, sodium and calcium brines, hypochlorite solutions, phosphoric acid, and the sulfite liquors and sulfurous acids used in the paper and pulp industry. This alloy is also austenitic, non-magnetic and non-hardenable using conventional methods. 316 stainless steel has better mechanical properties at elevated temperatures than 302/304 and offers excellent mechanical integrity at subzero temperatures. Typical applications for SPIROL's 316 Stainless Steel Coiled Pins include the following: marine, processing equipment, industrial, oil and gas and medical.
Request for a quoteSPIROL
Germany
SPIROL's Series 600 Superflex Coiled Pin has a loosely wrapped outer coil and a diameter at 90° to the seam equal to the hole size to provide a low insertion force and enhanced flexibility after insertion. The Superflex Pin eliminates insertion problems associated with hardened holes with sharp edges. A Superflex Coiled Pin is not distorted during insertion and maintains its straightness. One example of a great application for the Superflex Pin is when the pin is inserted into a shaft with both ends exposed for engagement into a slotted clutch component.
Request for a quoteSPIROL
Germany
The Series 500 Extra Light Duty Coiled Pins were specifically designed for use in soft or fragile materials. The 1½ coil formation ensures that the radial force exerted against the hole wall does not exceed the strength of the hole material to prevent deformation. These pins are also an economical solution where pin strength is not a major design consideration. Typical applications for Series 500 Extra Light Duty Pins include: hinge pins in plastic or ceramic assemblies, alignment pins, and fastening applications where the hole is close to an edge of an assembly component.
Request for a quoteSPIROL
Germany
You can rely on SPIROL to be a design partner that helps solve unique problems. Because we supply many customers with similar products in similar industries, we are able to meet most needs with our standard products at no additional cost. When the solution falls outside the normal requirements, we have the expertise and engineering personnel to solve those problems. By working with SPIROL in the design stage of your project, we will develop a solution that lowers your overall product cost, improves product quality, increases the robustness of your manufacturing process, and gets you to market faster. There are a number of common special Coiled Spring Pins that SPIROL has designed over the years to meet specific performance requirements. This includes making Coiled Pins from special materials such as 316 stainless steel, beryllium copper, and Inconel, or designing Coiled Pins to meet unique application requirements resulting in custom diameters, custom lengths, special features, etc.
Request for a quoteSPIROL
Germany
SPIROL's Series 102 Coiled Spring Pins were designed specifically for use in automotive transmission assemblies. These transmission pins are available in standard and heavy duty to enable the designer to choose the optimum combination of strength, flexibility and diameter to suit different host materials and application requirements. All Series 102 transmission pins are 100% dimensionally controlled for consistency during assembly. Additional advantages include: • Absorbs shock and vibration • Non-interlocking • Symmetrical • Easy, trouble free assembly • Ideal for automatic installation • Global supply
Request for a quoteSPIROL
Germany
While Coiled Spring Pins are extremely versatile self-retaining fasteners that can be used for many different functions, SPIROL has designed several series of Coiled Pins to meet the nuances and performance requirements of some particular niche applications. These Coiled Spring Pins are variations of our standard product either manufactured from special material, have a special finish or undergo specific processing to meet performance, corrosion, compatibility and assembly requirements for the specific application. These pre-designed application-specific series of Coiled Pins help companies shorten the design cycle to confidently launch their product quickly to their market with a pinning solution that has been tested and proven within their assembly.
Request for a quoteSPIROL
Germany
SPIROL invented the Coiled Spring Pin in 1948. Truly an engineered fasteners, the Coiled Pin is available in three duties, light, standard and heavy, to enable the designer to choose from the optimum combination of strength, flexibility and diameter to suit different host materials and application requirements. Their shock absorbing design dampens forces and vibration to prevent hole damage and prolong assembly life. Light Duty Coiled Spring Pins are generally recommended for soft, brittle or thin materials such as plastics, aluminium, die castings, ceramics, and where holes are located close to an edge of the assembly. In situations not subjected to significant loads, such as when used purely for alignment or as an axle, light duty Coiled Pins are often used because of easy installation resulting from lower insertion force.
Request for a quoteSPIROL
Germany
SPIROL’s heavy duty & fatigue resistant Coiled Spring Pins are available in diameters ranging from 1.5mm (.062") up to 20mm (.750"). Standard materials include high carbon steel, 302/304 nickel (austenitic) stainless steel, and 420 chrome (martensitic) stainless steel. Diameters larger than 12mm (.500") are available in 6150 alloy steel. SPIROL invented the Coiled Spring Pin in 1948. Coiled Pins are available in light duty, standard duty and heavy duty to match the required strength and flexibility for each application. A pin too strong for the applied load will not flex and may damage the hole. A pin that is too flexible may fatigue prematurely within the assembly. The Coiled Pin with the optimal balance of strength, flexibility and diameter will result in the prolonged useful life of the assembly.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Spirol coiled spring pins are coupling elements manufactured from rolled steel. They have a spiral shape and 2 1/4 coil cross-section, which gives them considerable radial flexibiliyt. This flexibility, together with the absence of the axial shear common to normal spring pins, enables them to perform at a superior level in the presence of shocks and vibrations between coupled elements. Coiled spring pins are available in three duties, light duty, standard duty and heavy duty, to provide a variety of combinations of strength, flexibility and diameters to accommodate different host materials and applications. Available in Carbon Steel (C67S HV420-545), Nickel Stainless Steel (AISI 304 hardened HV120). And also in Chrome Stainless Steel (AISI 420 HV460-560) upon request. LIGHT duty: ISO 8751, DIN 7343, UNI 6875 Wherever space allows, use Standard Duty Coiled pins. They have the optimum combination of strength and flexibility for use in nonferrous and mild steel assemblies.
Request for a quoteSPIROL
Germany
The Coiled Spring Pin was invented by SPIROL in 1948. SPIROL offers Coiled Pins in three duties, light, standard and heavy, to provide a variety of combinations of strength, flexibility and diameters to accommodate different host materials and applications. Standard duty (sometimes called "medium" duty) Coiled Spring Pins are generally recommended for use in nonferrous and mild steel assemblies and provide the optimum combination of strength and flexibility in these materials. Standard duty Coiled Pins are also preferred in hardened components when there is enough space to accommodate the larger diameter to withstand the applied force because of their ability to absorb shock and vibration. SPIROL's standard duty Coiled Spring Pins are offered in both metric (conforms to ISO 8750 and ASME B18.8.3M) and inch (conforms to ASME B18.8.2) sizes.
Request for a quoteACTON S.A.
France
Thick Series Spring Pins - E (Goup Elast E) Stainless Steel A1 - ISO 8752
Request for a quoteIGUS® GMBH
Germany
igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm Most important features: Very low weight High tensile forces Combinable with rod end bearings of the dimensional series E vibration dampening Noise dampening Available for left-hand and right-hand threads igubal® clevis joints are solid polymer made of igumid G according to DIN 71752, which can be combined with the rod end bearings of the dimensional series E as counterpiece. They consist of clevis joint, pin and circlip, or alternatively with spring loaded pin. igubal® spherical bearings application examples When to use it? When high stiffening is required When freedom from corrosion is desired When lubrication should not be used When you want to save weight When maintenance-free dry operation is desired When the easiest installation should be implemented When combinations with pneumatic cylinders and gas struts should be implemented When not to use? When temperatures above +200°C prevail When dimensions over 20 mm are needed igubal® clevis joint, mm With and without pin and circlip igubal® clevis joint, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joints with spring loaded pins, mm igubal® clevis joint combination, mm Complete knee joints consisting of clevis joint and rod end bearing igubal® clevis joint combination, mm igubal® spring loaded pin, mm igubal® spring loaded pin, mm igubal® pin, mm GBM/GSR Pin and circlip igubal® pin, mm GBM/GSR igubal® clevis joint, detectable, mm igubal® clevis joint, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® clevis joints with spring loaded pins, detectable, mm igubal® spring loaded pin, detectable, mm igubal® spring loaded pin, detectable, mm
Request for a quoteSPIROL
Germany
SPIROL's Series 880 Coiled Spring Pin was designed specifically for use as the hinge pin for PC board card lock and ejector clip mechanisms. The quality of the hinge is unsurpassed by other fastening methods due to the low insertion force and compression of the pin during and after installation. As with all Coiled Spring Pins, the Series 880 hinge pin for PC board card locks and ejector clips is self-retaining, and thus no secondary processes are required for retention. The Coiled Pin's uniform radial spring force results in a controlled hinge movement that remains consistent throughout the life of the assembly.
Request for a quoteSPIROL
Germany
The Series 550 Cosmetic Coiled Pin was designed specifically for cosmetic cases to ensure the perfect balance of strength and flexibility. The 1-1/2 coil construction ensures that the Cosmetic Coiled Pin exerts sufficient radial force to achieve the long-term desired swing torque while protecting the plastic from excessive stresses. The use of SPIROL Series 550 Cosmetic Coiled Pin will simplify your design and manufacturing process. Uniform radial spring force results in controlled hinge movement and a hinge quality that remains consistent over time. Controlled hinge movement is achieved with wider tolerances and lower moulding costs than when a Solid Pin or cut wire is used. Finally, low insertion force and compression of the pin during installation minimises hinge stress and scrap. The net result is the prolonged useful life of the assembly.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SPIROL
Germany
SPIROL's Series 100 Key Fob Coiled Spring Pins were designed specifically to secure the key to the fob. The advantages of these high-performance automotive key fob security pins are as follows: Increased productivity, easy and trouble-free assembly, and simplified logistics.
Request for a quoteFEINMETALL GMBH
Germany
Large variety of contact probes (pogo pins) for contacting PCBs even at difficult contacting conditions, different sizes, tip styles and spring forces available.
Request for a quoteNORELEM FRANCE
France
These spring plungers are chiefly used as ejectors and spring stops in machine construction. The thrust pin is actuated in the axial direction. Drawing reference: 1) grub screw glued in
Request for a quoteNORELEM FRANCE
France
Sleeve steel grade 5.8. Thrust pin POM. Spring grade D steel wire.
Request for a quoteNORELEM FRANCE
France
Sleeve 1.4305. Thrust pin 1.4034. Spring 1.4310. Version: Bright. Thrust pin hardened.
Request for a quoteNORELEM FRANCE
France
Hardened to 780 ±40 HV 10 and ground. Without leadin groove. Note All bushes have the bore size marked on the upper face, e.g. 10. Diameters D1 over 15 mm increase in size by 0.5 mm. Dowels or coiled spring pins together with DIN 1731 flathead screws can be used in place of the stop pin.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Extremely robust against oscillations and vibrations due to the Ø 32mm clamping shaft. The probe pin (without spring) is fixed with a magnetic tip on the surface of the measuring object. This allows the change in position of the target to be detected with high accuracy. Perfect for position detection of machine axes.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.
Request for a quoteResults for
Spring pins - Import exportNumber of results
57 ProductsCountries
Category