Spring 4 - Import export

This snap uses a spring socket and a post attached stud. it has a gentle action and is suitable for light weight fabrics. the spring is enclosed, which portects it from damage and allows it to maintain its’ snap action over the life of the garment. Spring Snaps use a SplitRing Socket. Our Spring Snaps come in a variety of colors and finishes. These Snaps are ideal when applying to thinner or more delicate materials.

Spring isolators can be used for source and sender vibration isolation. The springs are manufactured of a special spring steel wire and KTL coated. Every spring isolator can be provided with an additional damping cushion of stainless-steel. Elemente with a frequency range between 3-4 Hz can be provided with a viscous damping, too. Spring isolators with a natural frequency range of 3-5 or 4-6 Hz are especially made for higher forces. They can be expanded in size and load-capacity without any difficulty. Spring isolators of RG+ are available for four different natural frequency ranges: Spring isolators with a natural frequency of 3-4 Hz Spring isolators with a natural frequency of 5-6 Hz Spring isolators with a natural frequency of 7-9 Hz Spring isolators with a natural frequency of 3-5 or 4-6 Hz

plunger Ø 35 mm, stroke 10 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 20 mm, stroke 8 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 20 mm, stroke 8 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 16 mm, stroke 6 mm off-position extended contact by spring force pipe thread G1/4 max. 500 bar, as per data sheet B1.921

plunger Ø 35 mm, stroke 10 mm off-position retracted contact with air pressure, with return spring pipe thread G1/4 max. 500 bar, as per data sheet B1.921

Mıhla Firing Pin Assembly and Spring Spare Set Kit MHL101-4 : Firing Pin MHL101-5 : Trigger Ball Spring MHL101-6 : Firing Pin Retainer MHL101-8 : Roll Pin MHL101-9S-OTCS : Ignition Spring MHL5X-11 : Reset Spring

This product, produced with the mission of organic park equipment, is a natural solution to meet the need for the spring rocker, with room for 4 kids. If you want to increase the rustic atmosphere in your playgrounds, you can choose this product. Or you can add this product to a customized hybrid project.

Spring Wall units are ideal for installations with limited space or rehabilitation clinics requiring a sturdy anchor point for cords or springs. Exercises with this wall-mounted equipment can be performed while standing, kneeling, sitting, lying on your back or on your stomach. It is used with mats for floor exercises or with traditional mats. MATERIAL Solid oak wood with 10 positions for different work intensities DIMENSIONS Depth: 2cm; Width: 56 cm; Height: 184 cm WEIGHT 22 KG EQUIPMENT : Wooden skewer with springs Fixed wooden bar Non-slip push bar, adjustable to 6 heights, with a safety strap. 4 red springs (strong), 4 green springs (medium) Spring handle pack The Wall Unit is wall-mounted Pilates equipment designed to maximize the use of space. This metal frame features adjustable bars, springs, straps and handles, providing a variety of exercises to strengthen muscles, improve flexibility and stabilize the core.

Solid steel frame. Auto lubricating : never needs oil. 4 springs to adjust pressure. Wall mounted.

Technical data Dimensions (L/W/H) 228/118/176 cm Total weight 512 kg Equipment 8-step adjustable inclination of the backrest for indication-dependent positioning (10 steps) Ideal entry thanks to clearance between foot plate and seat cushion (with kink division of the foot plate) Stepless one-handed adjustment of both shoulder pads to upper body via pneumatic spring 4-step adjustable foot plate with adjustment aid Variable setting of the start position from the training position Low-noise and low-wear linear guide of the carriage Protective enclosure Training card on the device Reproducible scaled positioning aids Optionally up to 250 kg user weight Options User weight up to 250 kg Total weight block 200 kg (20 x 10 kg) SmartPanel SmartPanel with cockpit Isometric force measurement Fine adjustment 4 x 1 kg Fine adjustment 4 x 2 kg Stepless movement restriction Wobble board Foot plate Colour change Special border colour Special stitching in the padding Special padding embroidery...

Pjp contact form ภ4mm male banana black co1060n- Diameter 4 mm- 36 A / 60 Vdc- Type banana insulated unbreakable screw from the front- Contact by 4 springs on body Brass Nickel- Connection

Filter holding frames are made of Ltype steel bars welded together to the rectangular frame shape and consisting of zinc coated carbon steel resp. stainless steel. With adjustable tension springs the frames are perfectly suited for installation of all commercially available pocket filters, compact filters or for filter combination systems. The header frames of the filters are going to be formclosed fixed inside to our holding frame at 4 edges by help of 4 tension springs. With 2 detents and 2 spring centre points the filters inside the holding frame can be safely bend, at height of 25 mm and 50 mm ( 1 and 2 inch ). From the filter holding frames a complete filter wall can be easily & fast established by simple screwing together. On request stainless steel versions are available.

Individually manufactured for you - special designs without length limitation This sealing type is mostly used in tank construction, where they seal the gap between the tank wall and the longitudinal separator plate. Correct use of the baffle seal can significantly reduce power losses in heat exchangers. The sealing effect is achieved by 4 spring lamellas each, which are mounted fan-like in the support profile.

This is a 4 pc of metal spring clamps, with rubber handles and ends