Spray lubrication - Import export

Eckardt Umformtechnik GmbH Contact-free lubrication Flexible & clean application Our spray systems apply oils and release agents fully contact-free. Making use of this method you guarantee the medium is applied cleanly and evenly, which allows you to act flexibly if not all areas of a material are to be lubricated uniformly. One huge advantage of our spray systems is their extremely fast changeover times to use different grades of oils. Oil/release agent storage; manual and fully automatic control and monitoring of the spray process. We offer our customers a wide range of options. Features & benefits • Minimum setup times when changing spray medium • Different spray nozzles available • Suitable for all fluid media and numerous oil grades Individual solutions for all application purposes EOS systems are perfectly designed to meet the needs of industry to apply oils and release agents. They are solidly built and exceptionally easy to maintain; they reliably and precisely control

For lubricating machine elements under high loads (also under water influence) Lubrication of chains, joints and guides Lubrication of rolling and friction bearings Lubrication of toothed gearings, fittings, hinges and locks Advantages and benefits NSF H1 registered MOSH/MOAH-free The optimal additives allow good resistance to oxidation and ageing for long operating and durability Resistant to cold and hot water, steam and alkaline and acidic disinfectants and cleaning agents

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation

Lubrication wherever good penetration capacity is the only possibility for relubrication, for example at joints, hinges, linkages, levers and guides Lubrication of machine elements subjected to moisture, for example at conveying systems, packaging machines, automatic filling machines, etc. Chains in a dusty environment Advantages and benefits Light-coloured High lubrication effect due to optimum product formula Good creep properties, thus easy penetration even in narrow, hard-to-reach lubricating points Good lubricating and pressure absorption capacity Excellent corrosion protection Good wear protection, also in comparison to higher-viscosity oils without solid lubricants Broad range of uses in all maintenance sectors

Lubrication of chains, hinges, joints, ejector pins, clamping and drying frames or slideways at temperatures up to 250°C or under influence of water, for example conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Outstanding oxidation properties Resistant to water and steam Good creep properties Outstanding adhesion and lubrication effect with no tendency to drip No formation of hard residues Extreme wear protection through Moₓ-Active Resistant to ultraviolet radiation Also available as spray version OKS 3541 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Stir/shake well before use. Apply OKS 354 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3541 on evenly. Allow excess to drip off and wait for lubricant to penetrate

Precise Fogless spray lubrication even with highviscosity lubricants. Powerful pumps and sophisticated accessories make almost any lube application possible.

Good old technology for wellknown processes Roller Lubricators are popular despite minimizer spray solutions. GSW supports you with a preselected range of products and we help with practical advice based on our experience. On top of that, we offer a “highend” solution with our hybrid Lubricators that feature a combination of external spray and roller lubrication.

HybridTechnology — just for automobiles? CompuSpray is the LubricationHybrid featuring a perfect addition to the PressSpray Technology, this system will allow selective spray lubrication while fully boxed in a stainless steel housing. Special brushes evenly spread the pulseactivated lube on the strop and prohibit any mist from exiting the system. Excess lube is collected and drained back into the reservoir. 45° angled entry or exit strip guide, made of stainless steel; to support threading if CompuSpray is mounted right after the Feeder GSW offers integration into its electrical controls system for intelligent choice of individual nozzles. this way, a minimal and exactly defined lubrication according to the feeding pattern is possible. The programming and visualization becomes part of the main PLC – for an unbeatable priceperformance ratio!

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Electronic positioning of the cutting units on any angle within 22,5° and 135°. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 700x. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 609. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged...

Double mitre saw with a fixed unit on the left and the other one movable. Manual positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm, 5000 mm, 6000 mm. It is equipped with the system EC 601. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged to connect a motorised belt conveyor.

Universally applicable Largely biodegradable Silicone-free CO2 propellant Water-displacing Provides a protective coating Saltwater-resistant Super Lube is suitable for many materials and material compounds, such as iron, wood, non-ferrous metals, synthetics, leather, etc. Get your car ready in time for winter: Super Lube prevents car locks and doors from freezing. Super Lube – 17 products in one can: Aluminium cleaner and care product, greaser and lubricant for antennae, interior room spray, adhesive lubricant, high pressure lubricant, fan belt spray, contact and electro protection agent, assembly compound, MOS-2 lubricating and dissolving spray, rust and dirt remover, acid-resistant lubricant and terminal grease, locks and cylinder locks lubricant and line grease lubricant with PTFE, silicone spray, white greases and compounds, chain spray, Bowden cable spray. Fields of application The automotive industry, construction machinery, agricultural...

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water OKS 370 is suitable for use with the OKS Airspray system Also available as spray version OKS 371 Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Lubrication of valve seals, collars, O-rings, drives, piston rods and guides Lubrication of slides, slat-band and roller chains Lubrication of cutting knives as well as of needles and lifters of knitting machines Dismantling of rusted-in parts and removal of oil and greasy soiling Advantages and benefits NSF H1 registered Highly effective due to good creep properties Broad range of uses Displaces water Duolabel Clean the surfaces for optimal effect. Apply OKS 370 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system locations to be lubricated. Spray on evenly OKS 371 spray. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on the basis of the service conditions. Caution: Only mix with suitable lubricants.

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip Also available as spray version OKS 3521 For optimum effect, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 352 with a brush, drip oiler or by immersion or using a suitable automatic lubrication system to locations to be lubricated. Spray OKS 3521 on evenly. Allow excess to drip off and wait for lubricant to penetrate before resuming operation. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

High-Performance automatic circular saw for aluminium and non-ferrous heavy metal Fully automatic operation Use of TCT or solid carbide blades ø 250 mm Motor 7,5KW, 400 V, 50 Hz, infinitely adjustable Blade feeder hydropneumatic Material feeder with ball screw spindle and servo motor 2-axis NC control Simatic S7-300 with 7“ touch screen Cutting range: height up to 60 mm, width up to 140 mm Manual safety cover 2x Ø 100 mm swarf extraction connector Blade feeder pneumatic hydraulic controled vertical top to down Manual blade feed adjustment to optimize the feed length Pneumatic clamps horizontal left and right of the blade Diagnosis of errors, trouble shooting Pneumatic clamps vertical left of the blade Mist spray blade lubrication (filling level controlled) 1 l tank Parts slide (Option: conveying belt) Material feeder from 2 – 650 mm with ball screw spindle and servo motor Multiple material feed possible up to 3250 mm cutting length Vertical and horizontal clamps Reducer of...

For highest contact pressure and high circumferential speed, e.g. for rotary kilns, ball mills, rotary barrel mixers, ball mills, rope winches or friction presses also for guiding elements, slide bars, heavy transport chains and closed wire ropes Lubrication of rotating assemblies of convertors, cranes, crushers and dredges with spray or central lubricating systems Lubrication of heavily loaded gear couplings Advantages and benefits Most suitable for reliable supply of open gears, even at high circumferential speed Very efficient through EP additives in association with a specific combination of solid lubricants and adhesive additives Reliable protection of tooth flanks, even at high temperatures and with extended relubrication time Good pressure resistance of the lubricating film, excellent wear protection The film is not embrittling and aging. Without bitumen, solvent, does not contain heavy metals

— Superior electrical insulation and heat dissipation capability — Compact package with high force output — beam design for excellent structural integrity and strength High speed and high precision High-rigidity direct drive coupled with closed-loop control system enables precision control to attain high speed operations with excellent precision performances. In addition, the ironless linear motors are stable and smooth when operated at low speeds. Simple mechanical structure Multiple forcers, each operated individually, can be installed on a single magnetic way to form a simple overall structure that can be readily assembled. For high cleanness requirement applications The linear motor series offer solutions to dirt buildup and lubricant spray mist problems associated with conventional transmission structures containing gear gaps and ball screws. Hence this series is ideal for applications in dust-free environments.

The HCS MULTI-FLUID is a series of carbide circular saw manufactured by Eisele. The key highlights of the HCS MULTI-FLUID series include a firm base frame that is welded, a bigger scope of cutting, an arbitrary saw blade that is accessible to ensure maximum cutting scope that can reach up to 180 mm . The machine has a sturdy and robust base frame on which the combined sawing unit and material feed unit are mounted. This structure combined with a very robust machine design ensures a smooth sawing process with excellent cutting results and a long service-life of the saw blade. The Multi-Fluid system is excellent for high-alloy stainless steels and tool steels, nickelbasedalloys like Inconel and Hastelloy as well as titanium alloys. Depending on the requirements, the following cooling/lubrication components can be combined in a most effective way: — Coolant nozzles for wet processing — Micro-spraying device for minimum quantity lubrication — Cooling vortex tube for dry cutting

General purposed, lubricant spray with fast infusion, high holding on the surfaces. Widely used in industrial areas as a general lubricant as well as at homes where lubrication needed.

Grease Ultra Multifunctional grease for general use. This spray is suitable for lubricating machine components that are difficult to access (not for use in the food sector). Benefits: Multifunctional. Good resistance to water and pressure. Broad temperature range (-20°C to 140°C). Click here to see the technical specifications and norms of this spray.

Mobile, compact and multifunctional. Whether as manual spraying equipment or on a fully automatic spraying system, the compact supply tank with its 45 litre stainless steel tank is suitable for all tasks. Equipped as standard with a pneumatic lifting device, handling is particularly easy. By using proven components, the sprayer is perfectly suited for long-term use. The device is suitable for spraying lubricants or coatings with a high solid content. To change the container or clean it, the complete container cover with all attachments is lifted pneumatically.

Mobile, compact and multifunctional. Whether as manual spraying equipment or as compact solution for experiments. The compact pressure vessels with up to 18 litres useful volume are suitable for all tasks. The particularly easy handling makes these containers a popular entry-level solution. By using proven components, the spray unit is perfectly suited for long-term use. The pressure tanks with a self-developed circulation system are also suitable for spraying lubricants or coatings with solid content. For particularly easy transport, all pressure vessels can be equipped with a chassis.

Mobile, compact and multifunctional. Whether as manual spraying equipment or on a fully automatic robot spraying system, the compact supply tank with its 45 litre stainless steel tank is suitable for all tasks. Equipped as standard with a pneumatic lifting device, handling is particularly easy. By using proven components, the sprayer is perfectly suited for continuous operation. The device is suitable for spraying lubricants or coatings with a high solid content. To change the tank or clean it, the complete tank cover with all attachments is lifted pneumatically.

Secial spray nozzle for forging lubricants and casting lubricants. Maintenance free and large-sized to reduce the risk of clogging. The special feature of the EJ86 nozzel familiy is that the spray angle at the nozzle head can be varied by simply adjusting the nozzle head. Due to these variations, this spray head is suitable for many applications.

Features Full cone spray pattern with a round impact area and uniform distribution. Features smallest spray capacity among full cone spray nozzles. Unique design developed from new engineering concept to produce fine atomization by impinging two inflows inside vortex chamber. Ceramic orifice and closer provide excellent wear-resistance. Applications Spraying: Oils, lubricants, glues, etchants Cleaning: Galvanizing, gas Cooling: Machinery, gas

Features Flat spray pattern with a mountain-shaped spray distribution having gradually tapered edges. Tapered edges overlap to provide uniformity of spray distribution in multiple-nozzle arrangements. Applications Cleaning: Automotive, containers, films, felts, filters, screens, bottles, crushed stones, earth and sand, metal parts, machines, steel plates and pieces Spraying: Etchants, oils, lubricants, glues, solutions, insecticides, herbicides Cooling: Gas, smokes, heat exchangers, tanks, steels, roofs Water screen: Fire protection, heat protection, dust suppression, deodorization