Special chemicals - Import export

Zeolite is a microporous aluminosilicate substance that can be found in nature but can also be industrially produced. The industrially important zeolite compounds are synthetically produced. Silica and alumina are the two main basic materials used in Zeolite production. Its chemical formula is represented as Ca4.5Na3[(AlO2)12(SiO2)]. X H2O.

Polyvinyl alcohol has quality adhesive and emulsifying properties. It has high flexibility and tensile strength. It is insoluble and resists organic solvents, grease, and oil. It has strongaroma and high oxygen barrier properties. Most of these properties are dependent on humidity levels with high levels reducing its tensile strength.

Styrene Monomer – SM has the appearance of a colourless, oily liquid but aged samples may appear yellowish. It has a sweet, floral odour but high concentrations may have a less pleasing odour. It is insoluble in water but soluble in alcohol and most organic solvents.

Lithium Chloride is a chemical compound whose chemical formula is represented as LiCl. It is a typical ionic compound with some covalent properties. It is soluble in water, hydrazine, butanol, selenium (IV) oxychloride, propanol, methyl formamide, and polar solvents generally. It is hygroscopic. It has the appearance of a white, sharp solid in powdered form. It is a non-flammable chemical. It is prepared by the treatment of lithium carbonate with hydrochloric acid.

Lithium Carbonate is a special use chemical used in the steel industry. It serves as a moulding powder when casting steels. It is also usable in the health industry for the treatment of specific diseases. Likewise, the chemical finds application in the glass-making industry. You can extract lithium from a brine pool (underground). Lithium Carbonate is a natural chemical in lakes and seas. The chemical formula is Li2CO3.

Lithium Hydroxide Monohydrate, an inorganic compound, has its chemical formula represented as LiOH.H2O. It is a very useful chemical that is produced industrially from lithium carbonate (Li2CO3) in a metathesis reaction with Calcium hydroxide. An alternative route of industrial production involves the intermediacy of lithium sulfate. Its main byproducts are gypsum and sodium sulfate which have considerable market value. It is the weakest known alkali metal hydroxide but is classified as a strong base.

Ethylene Glycol Monovinyl Ether or 2 – Vinyloxyethanol has a colorless transparent appearance. It comes in a liquid form with a strong pungent odour and has a density level of 0.982 g/mL.

Ethylene Glycol Monobutyl Ether is a butyl ether of ethylene glycol. It is an organic compound. It is commonly obtained by either; the ethoxylation reaction of butanol and ethylene oxide in the presence of a catalyst or the etherification of butanol with 2-chloroethanol. Its chemical formula is represented as C4H9OC2H4OH.

Bromacil is an organic compound that is commercially available as a herbicide. Its chemical formula is represented as C9H13BrN2O2. It is one of a group of compounds ascribed as substituted uracils. It’s a pesticide that works by interfering with photosynthesis and spreading throughout the plant via the root zone.

Adipic Acid is an organic compound. It is classified as a dicarboxylic acid, and it is the most important dicarboxylic acid. It is a very useful chemical compound that is industrially produced from a mixture of cyclohexanone and cyclohexanol called ketone alcohol oil (KA Oil). This oil is oxidised with nitric acid to obtain adipic acid through a multistep pathway. Its chemical formula is C6H10O4.

Tyrolit divides the floor grinding process into three parts: rough grinding, pre-polishing, and polishing. In the first two steps, material is removed, and in the third phase, the floor gets its final finish. After each stage, chemical agents are used to densify, seal, or finish the floor. Customers receive these chemicals directly from Tyrolit. In rough grinding, material is removed based on the desired final appearance. Tyrolit offers metal bond grinding shoes with different grains. Cracks and pores are repaired with a special chemical filler. In pre-polishing, the floor is ground with ceramic/resin bonded tools to level it. A densifier compacts and hardens the surface, reducing water absorption. In the final polishing phase, the floor is sealed with a "sealer" to protect against liquids, grease, and dirt. Tyrolit's floor grinding chemicals transform drab substrates into robust, resilient floors with a long-lasting and appealing appearance.

Taylor made packaging, transport or storage containers for every kind of bulk goods and every transport route from a volume of 200 litres up to a volume of 3,000 litres, are provided by the use of Pactainer®. Concerning such Flexible Intermediate Container (FIBC) which are subject to constant innovations, EMPAC belongs to today’s trendsetter in this business. Pactainer® are according to the requirements of their field of application made of flat or circular woven fabric, provided with a PP-coating or with PE-inner lining and produced as a single-use, returnable container or with a permission for the transport of dangerous goods. They are produced with different forms of tops and bottoms and filling and discharge spouts. Our range of products contains 1-loop, 2-loop and 4-loop Pactainer®. For special fields of application, we can offer various custom-built models as well as automatic Big Bags. Fields of application: Chemical raw material and end products Special chemicals Granules Fertilizer Raw material for the food industry Beverage concentrate Stones and raw material and supplies for construction Flyash API pharmaceutical substances Main industries: Products for the agriculture industry, construction industry, chemicals, pharmaceuticals, terrestrial and garden products, drinks and instant beverages, wood products and synthetic material, cosmetics, food, disposal of waste, other pet supplies, cleaning agents, components for further processing and refinement

Load capacity: 15 kN test load EN 124. Material: Frame and cover sections in extruded aluminium. Stainless steel screws. Features: Odour and waterproof access cover in high-quality finish. Only 5 cm installation depth. Particularly suitable for situations where greater installation depths are not possible. The shallow trough results in a weight reduction when filled - so less effort is required to lift the cover. An unrestricted height of 14 mm is available for laying slabs, tiles or parquet flooring etc. Two chemical-resistant special seals. The cover is reinforced with a clamped steel mesh reinforcement. The Lift-Off opening system: Every HAGODECK Type BVA-SL slim Alu comes with a set of lifting keys and precise installation instructions. The HAGO advantage: Jammed covers are lifted by simply turning in the golden lifting key. Recommended applications: For indoor access shafts, for which a pleasant appearance is required. Also, in places where floor finishes may require...

Plastic blasting abrasives type WIWOX® KS have been specially developed for optimum, chemically neutral surface treatment and all gentle cleaning – especially for plastic and light metal. They are mainly used for paint stripping, roughening, matting, deburring and cleaning. Plastic blasting abrasives produce consistently high quality and do not cause any damage to the work piece to be treated.

Zirconium is a silver-grey, shiny heavy metal. In its pure form it is easy to work, corrosion resistant even at high temperatures and has a very low neutron capture cross section. In addition, zirconium offers good stability against structural damage caused by neutron irradiation and against cavitation by coolant flows. The metal is mainly used pure or alloyed with 1.2-1.7% tin, for corrosion resistant pipes, fittings and valves in the chemical industry. This special alloy is called Zircaloy. Zirconium plays an important role in reactor construction. It is used for fuel element claddings and holders, for the pressure vessel lining, and for all structural components that come into contact with neutrons. In the rocket and jet aircraft industry zirconium is used for the manufacture of combustion chambers and feed lines. In electron and X-ray tubes zirconium is used as getter material.

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Keiper’s series of UNITRANS conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

KEIPER conveyor belts are made of fully synthetic polyester or blended fabrics and can be adapted for a specific purpose by means of different designs as well as appropriate coatings and surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitable for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

We consider your individual requirements and build customised batching plants for you. Batching plants are an important component in the system processes for the delivery, storage, dosing and mixing of raw materials and form the basis for a high-quality end product. In addition to the storage of raw materials, this also includes the processing of individual components or the finished product. IFA Technology offers you turnkey and customised complete plants in various designs, which are specially manufactured for the chemical and building materials industries. We design batch plants as tower plants that make predominant use of gravity transport or as series plants with belt transport.

Viton = Special rubber resistant to chemicals and high temperatures temperatures.

The panel PCs and monitors of the MMT8000 & MMD8000 series fulfil the strict hygiene regulations of food, chemical and pharmaceutical industries. In addition, the devices are certified by the Fraunhofer IPA and are therefore also suitable for cleanrooms. The ideal solution for users who not only have to fulfil the highest standards of hygiene, but also wants performance and user-friendliness. High-performance processors and a capacitive multi touch screen enable smooth visualisation of processes in the production of food, beverages, pharmaceuticals and chemical products. The special feature is the closed stainless steel housing according to the HYGIENE COMFORT DESIGN, which can withstand cleaning with high-pressure cleaners.

This textile based blanket was designed and formulated for extremly sharp dot reproduction on wide range of sgeetfed presses. It is sutable for all kinds of inks and paper/carton stocks and it gives long service life. PROPERTIES New compressible layer coupled with textile carcass improves durability, gives excellent shock absorption and rapid recovery. Resists solvent penetration, reduces the risk of delamination. Unique fabric treatment ensures consistently low setting and optimal laydown. Gives added protection against water and chemical penetration. Specially formulated surface compound ensures optimal ink transfer and enables extra sharp dot reproduction. APPLICATION Sheetfed Packaging Continues F. Conventional * The information on this technical data sheet is based on our general experience.

This textile-based blanket was designed and formulated for extremely sharp dot reproduction and excellent paper feed on a wide range of heatset web presses. It is suitable for all kinds of coated papers for web applications. It also assures a long life service. PROPERTIES New middle compressible layer coupled with textile carcass improves durability, gives excellent shock absorption and rapid recovery. Resists solvent penetration, reduces the risk of delamination. Unique fabric treatment ensures consistent low setting and optimal laydown. Gives additional protection against water and chemical penetration. Specially formulated surface compound ensures optimal ink transfer and enables extra sharp dot reproduction. APPLICATION Heatset Continues F. Conventional * The information on this technical data sheet is based on our general experience.

Transferring liquids without making a mess? It’s possible thanks to the Double Action drum pumps! The pumps are made of polypropylene and polyethylene and are resistant to a wide range of chemicals. They are specially made to transfer acids, alkaline and chlorinated liquids, and liquid food products. The pumps have an innovative, patented double action: pumping occurs on every stroke, when the pump is raised and also when it’s lowered. The supplied adapter connectors are waterproof and do not leak Pumps from the base of the can, bottle, container, and extracts all liquid from it With anti-pump safety system to ensure user safety Less risk of injury: thanks to the height of the pumps, you no longer need to bend down or move containers to dispense liquid

The CHEM gear pump series was developed especially for the requirements of the chemical industry. The series is used for pumping and transferring low to medium viscosity media. The CHEM series is extremely flexible in its design and areas of application. Technical details: — Suction pressures from vacuum up to 15 bar and suction pressures with magnetic coupling up to 25 bar — Delivery volume 1.28 cc/rev to 12,000 cc/rev — Temperatures up to 300 degrees — As special pumps for the chemical industry according to customer specifications — Viscosities up to 1.000.000 mPas

BS Shockpad is a specialized polyethylene foam material, chemically cross-linked for enhanced performance. Through a combination of heat expansion and the addition of chemical inflators and cross-linking agents during extrusion, this foam material achieves advanced chemical and mechanical properties. Compared to physically cross-linked polyethylene foam, the cell structure of BS Shockpad is larger, resulting in a slightly less smooth surface. It is widely used in applications that require sound, heat, humidity insulation, and shock protection.

PE covering hoods and PE liner sacks (e.g, for EURO, CHEMICAL and SPECIAL pallets and larger containers) Width: between 1000 and 3000 mm Length: between 500 and 4000 mm Thickness: between 0.03 and 0.25 mm The most extensive standard range of PE products from North Rhine Westphalia

The Dexnyl PEEK shrink tube provides a protective layer for sensitive or critical components as an alternative to traditional materials. PEEK shrink tubes are particularly effective in environments where extreme heat or cold, high pressure, or chemicals, water, or dielectric interference endangers wires and electrical components. BIEGLO can offer PEEK shrink tubing with a diameter of 0.965mm to 9.957mm. PEEK is a thermoplastic polymer that is commonly used instead of metal or other types of plastics. PEEK has a temperature resistance of up to 240 ° C and a special resistance to chemicals.