Results for
APD MAQMASTER
Spain
Advancement of the hydropneumatic disc. Protective housing with safety sensor. Cutting speed regulation. Cut at any desired angle between -45° and +45°. Cut right and left at fixed angles 0°, 15°, 22.5°, 30°, 45°. Movable miter that increases cutting capacity. Vertical and horizontal pneumatic clamps. Ø 420 mm cutting disc. Refrigeration system. OPTIONS Single-phase system. Dust extraction system
Request for a quoteAPD MAQMASTER
Spain
Hydropneumatic cutting process. Safe cutting with double spring system and disc guard. Vertical and horizontal pneumatic clamps. Shock resistant cast iron bushing. Cut at any angle between -45º and +45º. Cutting speed adjustment according to the profile. Cut with fixed angle of 0o, 15o, 22.5o, 30o, 45o to the right and left. Ø 400 mm disc. Cooling system. OPTIONAL Roller road. Single-phase system.
Request for a quoteAPD MAQMASTER
Spain
Length TTRM 1500 = 4050 mm Height TTRM 1500 = 2450 mm Width TTRM 1500 = 1260 mm Horizontal Cut TTRM1500 = 3000 mm Vertical Cut TTRM 1500 =1500 mm Length TTRM 2100 = 5050 mm Height TTRM 2100 = 3100 mm Width TTRM 2100 = 1460 mm Horizontal Cut TTRM 2100 = 4000 mm Vertical Cut TTRM 2100 = 2100 mm Cutting depth 90 mm Disc diameter 350 mm Voltage 230 / 400V – 50 Hz Power 3CV RPM 3000 OPTIONAL Support rollers Probe system for alucobom. Vertical digital display. Horizontal digital display.
Request for a quoteAPD MAQMASTER
Spain
MONOBLOCK WORK BASE. Monobloc cutting table construction system without screws or adjustments. MILLS AND CUTS IN THE SAME OPERATION. The TTRM-3x is the only one on the market capable of cutting and milling in the same operation, so the savings in downtime are substantial. IN THE TTRM-3X THE DISCS ARE NOT CHANGED FOR MILLING OR CUTTING. The cutting and milling head internally incorporates the two cutting and milling discs, therefore, no adjustments need to be made between operation changes. ERGONOMIC CONTROL PANEL WITH SELECTOR FOR CUTTING, MILLING OR BOTH SIMULTANEOUSLY. By turning a selector on the control panel, the operation to be carried out is selected without adjustments, without downtime. THE FEELING DISC VERY CLOSE TO THE MILLING DISC. (the distance between the feeler disc and the cutting disc is reduced to achieve simultaneous folding slots of less than 15mm, useful for making curvatures in the panel, etc.) DISTANCE FROM CUTTING DISC TO VARIABLE MILLING DISC.
Request for a quoteAPD MAQMASTER
Spain
X axis (Longitudinal) 2000 mm Y axis (Horizontal) 4000 mm Z axis (Vertical) – without milling 300 mm POSITIONING DISTANCES X axis (Longitudinal) 108m/dK Y axis (Horizontal) 108m/dK Z axis (Vertical) 10.5m/dK SPINDLE 7.5/9kW fan cooled spindle Maximum power 24000 rpm Maximum rotation speed ISO 30 Tool holders Electric fan TOOLS MAGAZINE Automatic umbrella type tool magazine system Maximum number of tools 10 Maximum disc diameter that can be loaded into the magazine system 150 mm Maximum dimensions of tools that can be loaded in the magazine system 140 mm Diameter / 120 mm Length Number of angled heads that can be loaded into the magazine system 2 OPERATIONAL AREA Vacuum table system with automatic zoning Vacuum table tube dimensions 269 mm * 2000 mm Number of externally controlled vacuum modules 7 X axis reference support 1 And axis reference support 4 Automatic tool length measurement Possibility of operation in two stations
Request for a quoteAPD MAQMASTER
Spain
X axis (Longitudinal) 2000 mm Y axis (Horizontal) LEPUS II 4000 mm – LEPUS II L 7000 mm Z axis (Vertical) – without milling 200 mm POSITIONING DISTANCES X axis (Longitudinal) 55 m /dK Y axis (Horizontal) 55 m /dK Z axis (Vertical) 15 m /dK SPINDLE Spindle cooled by 4 fans Maximum power 2.2 kW Maximum rotation speed 18000 rpm ER20 tool holder CONTROL UNIT CNC control Remote network connection, data transfer via Ethernet and USB. OPERATIONAL AREA Dust and chip aspiration system Suction areas in independent spaces Externally controlled vacuum tables LAPUS II 6 – LAPUS II L 8 Automatic tool length measurement Possibility of doing double station processing X axis reference support Y axis reference support LEPUS II 4 – LEPUS II L 9 Metal fences closed on three sides that prevent access to the work area
Request for a quoteAPD MAQMASTER
Spain
The PLC 3000 Folder is the ideal solution for those looking to fold aluminum sheet efficiently and accurately. With its ergonomic design and robust construction, this folder delivers exceptional performance in every operation. Thanks to its manual design, the PLC 3000 Folder gives the operator complete control over the folding process. Its ease of maneuver allows quick and precise adjustments, guaranteeing bends with constant and uniform radii on the 1.2 mm aluminum sheet. The PLC 3000 Folder is equipped with features that improve its performance and facilitate its use. Its sheet metal clamping system ensures a firm and stable fixation during folding, preventing slipping and ensuring consistent results. In addition, it has adjustable length stops, which allows folding with precise and repeatable measurements. These stops facilitate serial work and speed up the production process, saving time and increasing efficiency.
Request for a quoteAPD MAQMASTER
Spain
Manual override Folds composite panels quickly and efficiently, reducing downtime. Continuous and equal folds, the design of the folder guarantees uniform pressure along the entire length of the fold, regardless of its dimensions. Manufactured in 4 or 5 meters in length. It can be manufactured to the size desired by the client upon request.
Request for a quoteAPD MAQMASTER
Spain
It has a fixed 8-position tool changer and a carriage to which another tool changer can be attached, always with 8 positions. Thanks to its numerous versions, 1500×3000, 1650×4000, 1650×6000, 2000x 4000 and 2000×8000, the PWI has found various applications in the industrial sector, for example in plastics, aluminum and agglomerates in general. Special versions can be supplied for milling and threading steel profiles and/or bars. PWI offers a wide Z to hold i supports and to hold particular profiles. In its complete version with clamps, it allows alternating compounds and profiles, in order to optimize the machine for different applications in a single work environment. This machine is usually chosen for its versatility and speed, with an interpolation of up to 40 m/min. In this case, CADCAM ITALMAC provides this version of CNC with all the DXF and geometric figure import tools, so that the PWI is recognizable compared to other similar machines.
Request for a quoteAPD MAQMASTER
Spain
Vertical CNC woodworking machines with closed table. Vertical CNC machines with three, four and five controlled axes equipped with a fixed Bakelite work table. Suitable for any type of processing, recommended for those who work a lot of panels, since the closed top technology allows both suction cup and nesting operations
Request for a quoteAPD MAQMASTER
Spain
Three, four and five controlled axis configurations Bakelite work surface Extreme versatility to adapt to different materials such as PVC and plexiglass Working ranges: 3500×1600 – 2000 mm, 5000×1600 – 2000 mm, 6000×1600 – 2000 mm Work areas divided into 6/8/10 vacuum zones, automatically activated by the software according to the dimensions of the processed panels Benefits: Speed and precision in CNC machining of aluminum panels Greater comfort and productivity for operators Significant space savings compared to horizontal machines Versatility to work with a wide range of materials
Request for a quoteAPD MAQMASTER
Spain
Fixed Bakelite work table: Robust and resistant, ideal for demanding jobs. Closed table technology: Allows both suction cup and nesting operations, optimizing your workflow. Controlled axes: Three, four or five axes for greater precision and flexibility in your projects. Suitable for any type of processing: Perfect for cutting, milling, drilling and much more. Ideal for working with panels Horizontal CNC machines with a closed table are especially recommended for those working with wooden panels, as the closed top technology allows for safe and precise clamping using suction cups or sockets.
Request for a quoteAPD MAQMASTER
Spain
Special aluminum alloy body honed with long-lasting electrostatic paint. Special legs to avoid vibration. Great versatility and easy handling. Upper front template with double copy. The pocketing of any figure can be through without needing to change the machining face. Engine power: 1.5 HP 220/380 V Spindle speed: 15,350 rpm Fresolin diameters: d=5mm D=8mm Milling capacity: 255 x 110 x 130 mm. (X AND Z) Fresolin Ø 5 mm. (1 piece) Service keys Lubrication system Measurement stop equipment OPTIONAL Special copy template
Request for a quoteAPD MAQMASTER
Spain
Copying equipment for high production. Vertical and horizontal pneumatic clamps. It consists of 3 motors that can be activated according to the machining needs. Works on 3 faces of the profile in the same cycle without having to rotate the piece. 5 mm Fresolin. Oversized profile supports arm on both sides. OPTIONS Special copy templates. Single-phase system. 8 mm Fresolin.
Request for a quoteAPD MAQMASTER
Spain
Multi-channel grooving – regardless of the copying system – with the help of supports. Pneumatic clamps. Cremone with 3 drill, bits for steel reinforcement in PVC. 5mm copy milling cutter. Profile support. OPTIONAL Single-phase system. 8mm copy milling cutter. Refrigeration system.
Request for a quoteAPD MAQMASTER
Spain
copy system Drainage system with independent motors Triple bit cremone system Includes profile support. Options Milling for 8 mm Single phase system Milled cooling system
Request for a quoteAPD MAQMASTER
Spain
The EM100 Trimming Machine is an industrial machine designed for the perfect finishing of wooden pieces. With this retesting machine you can obtain a precise and clean cut on all your pieces, which will increase the speed of work and allow you to achieve quality finishes. The EM100 has a high-speed circular saw that guarantees a clean and precise cut. In addition, its depth adjustment system will allow you to regulate the depth of the cut according to your needs. It also has a guide stop for a more precise and safe cut. Technical characteristics: Motor power: 2.2 kW Maximum blade diameter: 350mm Blade speed: 4800 rpm Tilt angle: 0° – 45° Maximum cutting height: 100mm Maximum cutting width: 300 mm Weight: 250kg
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
APD MAQMASTER
Spain
Are you looking for an efficient and easy-to-use tool to make accurate copies in woodworking? The M400 copier is the solution. This copier is equipped with a powerful motor and an adjustable cutting guide, allowing you to achieve professional-quality results effortlessly. In addition, it offers a compact and robust design that makes it a durable and wear-resistant machine. Technical characteristics: Motor power: 1.1 kW Motor rotation speed: 12,000 RPM Maximum milling height: 100 mm Maximum milling length: 280 mm Weight: 110kg
Request for a quoteAPD MAQMASTER
Spain
The EDGE CNC Contouring Center is a compact controlled horizontal center capable of PVC profile milling and splicing. PVC profiles can be coated in white or standard or even coated with aluminum, copper, wood, acrylic, fabric, fiberglass, etc... The rotation speed of the axes can be adjusted from 500 to 24000 rpm through a variable frequency inverter. The control allows interpolation managed by numerical control of the X and Y axes. The movement of the X and Y axes is produced through brushless motors and recirculating ball screws, the Z axis uses a brushless motor on a helical rack. The machine is completed with four double-acting pneumatic jaws to block the piece.
Request for a quoteAPD MAQMASTER
Spain
1. Advanced industrial 3-axis CNC profile machining systems. 2. Suitable for processing aluminum, PVC and other light metal materials; 3. The machine completes precise milling, drilling, slotting and other multifunctional functions in one go. 4. Work table with pneumatic positioning -90°/0°/+90°. Optional 45 degree milling function is available. 5. Adopts high-precision ball screws to ensure smooth movement, high-precision positioning and processing. 6. The operating platform of the system: Linux platform. English, Chinese, Thai, Korean and Vietnamese languages are available. 7. The latest version of the system: 4G 4-core memory, fast and smooth operation. 8. Additional one meter support table for special processing of long profiles. 9,400 mm high safety lid for safe operation.
Request for a quoteAPD MAQMASTER
Spain
Cooling by manual pump and manual treaders. Start the engine through the button on the left handle. Table dimensions 450 x 230 mm. Longitudinal travel 230 mm. Transverse travel 110 mm. Vertical displacement 145 mm. Motor 0.50 Hp. Cutting speed 9600 rpm. Milling cutter handle diameter 8 mm. PACKAGING AND DIMENSIONS 630 x 830 x 1730 (120 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
Cooling by manual pump and manual treaders. Start the engine through the button on the left handle. Table dimensions 450 x 230 mm. Longitudinal travel 230 mm. Transverse travel 110 mm. Vertical displacement 145 mm. 0.50 Hp motor. Cutting speed 9600 rpm. Milling cutter handle diameter 8 mm. PACKAGING AND DIMENSIONS 630 x 830 x 1730 (120 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
Automatic spray cooling and pneumatic tampers. Start the engine through the button on the left handle. Table dimensions 500 x 280 mm. Longitudinal travel 260 mm. Transverse travel 140 mm. Vertical displacement 150 mm. 1.00 Hp engine. Cutting speed 9000 rpm. OPTIONS Swivel cabinet/base. PACKAGING AND DIMENSIONS 1004 x 680 x 1930 (150 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
Semi-automatic machine to make housings for locks, hinges, cylinders, etc. in aluminum or PVC carpentry. With electronic variator for iron milling. Milling is carried out using a template (with two copiers) or with transverse, longitudinal and vertical stops. Cooling is automatic by spraying. The head has a stop device at the desired height to perform milling. Table dimensions 500 x 280 mm. Longitudinal travel 260 mm. Transverse travel 140 mm. Vertical displacement 150 mm. 1.00 Hp engine. Cutting speed 2000-7000 rpm. Milling cutter handle diameter 10 (other diameters optional) mm. OPTIONS Swivel cabinet/base. PACKAGING AND DIMENSIONS 1004 x 680 x 1930 (150 Kg). Standard wooden cage packaging.
Request for a quoteAPD MAQMASTER
Spain
1. The 106CF pantograph is equipped with a vertical unit and a horizontal punching unit. 2. The vertical group, by copying the appropriate interchangeable jigs, can quickly and accurately mill slots/holes in both aluminum and PVC. 3. The horizontal group allows three simultaneous holes to be inserted to insert the handle into the PVC profiles.
Request for a quoteAPD MAQMASTER
Spain
Equipped with very thick metal blades so that the accumulation of chips does not damage or interfere with the vacuum work. There is the possibility of being activated and deactivated from the parent machine as long as it has this function.
Request for a quoteAPD MAQMASTER
Spain
High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels that operate with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for container opening. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.
Request for a quoteAPD MAQMASTER
Spain
High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels what will they say with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for opening the container. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.
Request for a quoteAPD MAQMASTER
Spain
Ideal for collecting steel shaves, dust, aluminum and plastic material. Optimal maneuverability, compactness and suction efficiency guarantee constant performance during the use phases. In addition, the standard pneumatic turbine filter shaking guarantees perfect and efficient filtering. 2 HP motor. Sound level 64 db. Suction mouth diameter 1×100 mm. Suction capacity 1200 m3/h. Storage capacity 100 l. Optional cleaning kit. PACKAGING AND DIMENSIONS 1810 x 830 x 750 mm (95 Kg). Hard cardboard packaging.
Request for a quoteResults for
Pvc window - door - Import exportNumber of results
92 ProductsCompany type