Pvc doors - Import export

Multi-channel grooving – regardless of the copying system – with the help of supports. Pneumatic clamps. Cremone with 3 drill, bits for steel reinforcement in PVC. 5mm copy milling cutter. Profile support. OPTIONAL Single-phase system. 8mm copy milling cutter. Refrigeration system.

Advancement of the hydropneumatic disc. Protective housing with safety sensor. Cutting speed regulation. Cut at any desired angle between -45° and +45°. Cut right and left at fixed angles 0°, 15°, 22.5°, 30°, 45°. Movable miter that increases cutting capacity. Vertical and horizontal pneumatic clamps. Ø 420 mm cutting disc. Refrigeration system. OPTIONS Single-phase system. Dust extraction system

Hydropneumatic cutting process. Safe cutting with double spring system and disc guard. Vertical and horizontal pneumatic clamps. Shock resistant cast iron bushing. Cut at any angle between -45º and +45º. Cutting speed adjustment according to the profile. Cut with fixed angle of 0o, 15o, 22.5o, 30o, 45o to the right and left. Ø 400 mm disc. Cooling system. OPTIONAL Roller road. Single-phase system.

Length TTRM 1500 = 4050 mm Height TTRM 1500 = 2450 mm Width TTRM 1500 = 1260 mm Horizontal Cut TTRM1500 = 3000 mm Vertical Cut TTRM 1500 =1500 mm Length TTRM 2100 = 5050 mm Height TTRM 2100 = 3100 mm Width TTRM 2100 = 1460 mm Horizontal Cut TTRM 2100 = 4000 mm Vertical Cut TTRM 2100 = 2100 mm Cutting depth 90 mm Disc diameter 350 mm Voltage 230 / 400V – 50 Hz Power 3CV RPM 3000 OPTIONAL Support rollers Probe system for alucobom. Vertical digital display. Horizontal digital display.

MONOBLOCK WORK BASE. Monobloc cutting table construction system without screws or adjustments. MILLS AND CUTS IN THE SAME OPERATION. The TTRM-3x is the only one on the market capable of cutting and milling in the same operation, so the savings in downtime are substantial. IN THE TTRM-3X THE DISCS ARE NOT CHANGED FOR MILLING OR CUTTING. The cutting and milling head internally incorporates the two cutting and milling discs, therefore, no adjustments need to be made between operation changes. ERGONOMIC CONTROL PANEL WITH SELECTOR FOR CUTTING, MILLING OR BOTH SIMULTANEOUSLY. By turning a selector on the control panel, the operation to be carried out is selected without adjustments, without downtime. THE FEELING DISC VERY CLOSE TO THE MILLING DISC. (the distance between the feeler disc and the cutting disc is reduced to achieve simultaneous folding slots of less than 15mm, useful for making curvatures in the panel, etc.) DISTANCE FROM CUTTING DISC TO VARIABLE MILLING DISC.

X axis (Longitudinal) 2000 mm Y axis (Horizontal) 4000 mm Z axis (Vertical) – without milling 300 mm POSITIONING DISTANCES X axis (Longitudinal) 108m/dK Y axis (Horizontal) 108m/dK Z axis (Vertical) 10.5m/dK SPINDLE 7.5/9kW fan cooled spindle Maximum power 24000 rpm Maximum rotation speed ISO 30 Tool holders Electric fan TOOLS MAGAZINE Automatic umbrella type tool magazine system Maximum number of tools 10 Maximum disc diameter that can be loaded into the magazine system 150 mm Maximum dimensions of tools that can be loaded in the magazine system 140 mm Diameter / 120 mm Length Number of angled heads that can be loaded into the magazine system 2 OPERATIONAL AREA Vacuum table system with automatic zoning Vacuum table tube dimensions 269 mm * 2000 mm Number of externally controlled vacuum modules 7 X axis reference support 1 And axis reference support 4 Automatic tool length measurement Possibility of operation in two stations

X axis (Longitudinal) 2000 mm Y axis (Horizontal) LEPUS II 4000 mm – LEPUS II L 7000 mm Z axis (Vertical) – without milling 200 mm POSITIONING DISTANCES X axis (Longitudinal) 55 m /dK Y axis (Horizontal) 55 m /dK Z axis (Vertical) 15 m /dK SPINDLE Spindle cooled by 4 fans Maximum power 2.2 kW Maximum rotation speed 18000 rpm ER20 tool holder CONTROL UNIT CNC control Remote network connection, data transfer via Ethernet and USB. OPERATIONAL AREA Dust and chip aspiration system Suction areas in independent spaces Externally controlled vacuum tables LAPUS II 6 – LAPUS II L 8 Automatic tool length measurement Possibility of doing double station processing X axis reference support Y axis reference support LEPUS II 4 – LEPUS II L 9 Metal fences closed on three sides that prevent access to the work area

The PLC 3000 Folder is the ideal solution for those looking to fold aluminum sheet efficiently and accurately. With its ergonomic design and robust construction, this folder delivers exceptional performance in every operation. Thanks to its manual design, the PLC 3000 Folder gives the operator complete control over the folding process. Its ease of maneuver allows quick and precise adjustments, guaranteeing bends with constant and uniform radii on the 1.2 mm aluminum sheet. The PLC 3000 Folder is equipped with features that improve its performance and facilitate its use. Its sheet metal clamping system ensures a firm and stable fixation during folding, preventing slipping and ensuring consistent results. In addition, it has adjustable length stops, which allows folding with precise and repeatable measurements. These stops facilitate serial work and speed up the production process, saving time and increasing efficiency.

Manual override Folds composite panels quickly and efficiently, reducing downtime. Continuous and equal folds, the design of the folder guarantees uniform pressure along the entire length of the fold, regardless of its dimensions. Manufactured in 4 or 5 meters in length. It can be manufactured to the size desired by the client upon request.

The M100 copier is a necessary tool for every carpentry professional looking for quality results in their work. It has an adjustable cutting guide and a powerful motor, thanks to which you can make detailed and precise copies in wood and other materials. In addition, thanks to its compact and robust design, it is easy to transport and resistant to wear. Technical characteristics: Motor power: 1.1 kW Motor rotation speed: 12,000 RPM Maximum milling height: 100 mm Maximum milling length: 280 mm Weight: 90kg

The EDGE CNC Contouring Center is a compact controlled horizontal center capable of PVC profile milling and splicing. PVC profiles can be coated in white or standard or even coated with aluminum, copper, wood, acrylic, fabric, fiberglass, etc... The rotation speed of the axes can be adjusted from 500 to 24000 rpm through a variable frequency inverter. The control allows interpolation managed by numerical control of the X and Y axes. The movement of the X and Y axes is produced through brushless motors and recirculating ball screws, the Z axis uses a brushless motor on a helical rack. The machine is completed with four double-acting pneumatic jaws to block the piece.

Cooling by manual pump and manual treaders. Start the engine through the button on the left handle. Table dimensions 450 x 230 mm. Longitudinal travel 230 mm. Transverse travel 110 mm. Vertical displacement 145 mm. 0.50 Hp motor. Cutting speed 9600 rpm. Milling cutter handle diameter 8 mm. PACKAGING AND DIMENSIONS 630 x 830 x 1730 (120 Kg). Standard wooden cage packaging.

Automatic spray cooling and pneumatic tampers. Start the engine through the button on the left handle. Table dimensions 500 x 280 mm. Longitudinal travel 260 mm. Transverse travel 140 mm. Vertical displacement 150 mm. 1.00 Hp engine. Cutting speed 9000 rpm. OPTIONS Swivel cabinet/base. PACKAGING AND DIMENSIONS 1004 x 680 x 1930 (150 Kg). Standard wooden cage packaging.

Semi-automatic machine to make housings for locks, hinges, cylinders, etc. in aluminum or PVC carpentry. With electronic variator for iron milling. Milling is carried out using a template (with two copiers) or with transverse, longitudinal and vertical stops. Cooling is automatic by spraying. The head has a stop device at the desired height to perform milling. Table dimensions 500 x 280 mm. Longitudinal travel 260 mm. Transverse travel 140 mm. Vertical displacement 150 mm. 1.00 Hp engine. Cutting speed 2000-7000 rpm. Milling cutter handle diameter 10 (other diameters optional) mm. OPTIONS Swivel cabinet/base. PACKAGING AND DIMENSIONS 1004 x 680 x 1930 (150 Kg). Standard wooden cage packaging.

1. The 106CF pantograph is equipped with a vertical unit and a horizontal punching unit. 2. The vertical group, by copying the appropriate interchangeable jigs, can quickly and accurately mill slots/holes in both aluminum and PVC. 3. The horizontal group allows three simultaneous holes to be inserted to insert the handle into the PVC profiles.

High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels that operate with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for container opening. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.

High power centrifugal fans up to 4400 m3/h. Visual fill indicator. Continuous duty cycle with no maintenance requirement. Structure completely made of steel. Anti-return wheels what will they say with the parking brake. Class M polyester filter. Container capacity: 160 Lt. Quick release for opening the container. Filter agitation with integrated pneumatic motor (OPT). Silencer to reduce the vacuum noise level in accordance with standards. OPTIONAL Remote control. Set of pvc bags to collect chips. Cleaning set to clean the machine after work. Antistatic set. Additional deposit from 500 to 1000 Lt. Filter protection with added cyclonic pre-filter. Lifting kit to avoid the implementation of any force by the operator during the container emptying process.

Tank (liters) 270 liters Aspirated Air (liters/min) 653 liters minute Power (HP/KW) 5.5 hp – 4 kw Head Rotation Speed ​​(rpm) 1,400 rpm Power (V/phase/Hz) 400/3/50 Sound level dB(A) dB (WA) 77 – 97 dB Pressure (bar) 11 bar Dimensions (mm) 1,575 x 680 x 1,150 Weight (Kg) 167 kilos

Dew point +5ºC 750 liters Dew point +3ºC 600 liters Working pressure 7 bar Inlet air temperature 35ºC Ambient air temperature 25ºC Connection ¾” M Power supply (V/phase/Hz) 230/1/50 Pressure (bar) 16 bar Dimensions (mm) 350 x 500 x 450 Weight (Kg) 19 kilos

Optimal maneuverability, compactness and suction efficiency guarantee constant performance during the use phases. The standard pneumatic turbine filter shake guarantees perfect and efficient filtration. 2.2 kW engine. Suction mouth diameter (x2) 120 mm. Suction capacity 1500 m3/min. Storage capacity 172 l. Weight 140 Kg. 5 meters of flexible tube included. PACKAGING AND DIMENSIONS Hard cardboard packaging.

Optimal maneuverability, compactness and suction efficiency guarantee constant performance during the use phases. The standard pneumatic turbine filter shake guarantees perfect and efficient filtration. 3 kW motor. Suction mouth diameter (x2) 160 mm. Suction capacity 2500 m3/h. Storage capacity 160 m3. Optional cleaning kit. PACKAGING AND DIMENSIONS 2070 x 980 x 845 mm (135 Kg). Hard cardboard packaging.

Hydropneumatic movement Automatic return to the starting point of the operation. Centering system to ensure profiles sit correctly at 45° miter Pneumatic clamps Pneumatic bur changing system.

CHARACTERISTICS Cleaning of the lower, upper and outer sides of the profile thanks to 2 independent cleaning units 250 profile memory capacity Touch control panel Thanks to the special program of Özçelik Makina, you can easily and quickly write the profile program for cleaning, in an easy and intuitive way Cleaning speed and axial speeds set by the operator External drive using CNC controlled drive

1. CNC polishing machine equipped with two reversible blades for white and coating and with a blade for cleaning profiles of various shapes with movement in two controlled axes. 2. Automatic insertion and positioning of the profile thanks to the centering device that acts on the proximity sensors, guaranteeing precision and accuracy. 3. Maximum dimensions of the workable profile equal to a maximum of 190 mm in height and a minimum of 35 mm 4. Intuitive 4” Touch Screen panel with the possibility of memorizing up to 99 work programs. 5. Freely programmable in all processing phases. Programming is carried out through buttons for the movement of the axes in the machine and subsequent transcription into an Excel sheet. 6. Upon request, programming can be carried out by Ital-Plastick technical staff.

1. PA2CNC – Automatic CNC spoke polishing machine equipped with 9 tools for complete cleaning of the welded corner, capable of working profiles of any shape (linear, internal, external radius, etc.), with a maximum height of 200 mm and minimum 35mm . The integrated tools are: a) four reversible blades for cleaning the flat part with one side dedicated to the trenching finish and the other to the smooth pass; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing, such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Programming is carried out in self-learning and the resulting program is transformed into ISO language (upon request, the machine can be equipped with an ISO interpreter).

1. PA2CNC EASY II CNC automatic cleaning machine equipped with 7 tools for complete cleaning of the welded corner capable of working profiles of any shape (linear, internal radius, external, etc.), with a maximum height of 185 mm and a minimum of 35mm. The integrated tools are: a) two reversible blades for cleaning the flat part with one side dedicated to finishing with trenches and the other to rinsing; b) radial blade to clean the rounded part; c) an upper and a lower vertical milling/drilling unit for different types of processing such as joint channeling or particular finishes depending on the shape of the profile; d) Ø250 blade with movement in two axes; e) hook for cleaning the anchoring area of ​​the glass ball. 2. Automatic dimensional self-recognition of the profile to be machined and positioning with automatic centering of the square to be cleaned.

The GARNET ECO PLUS Machining Center is the perfect solution for your machining needs. With its robust and high-quality design, this equipment will allow you to obtain the best results in your production processes. Its state-of-the-art computer numerical control (CNC) system guarantees maximum precision in the machining of your parts, which translates into a significant improvement in the quality of your products. The GARNET ECO PLUS Machining Center also stands out for its ease of use. Thanks to its intuitive interface, you can program your machining processes simply and quickly. In addition, its compact and ergonomic design will allow you to save space in your workshop.

ULISSE is the ideal machine for an industrial sector with increasing demands. A 4-axis CNC that includes a large work area, the largest available in this sector, with a size of 700 x 300 mm. Available in standard 4, 7 and 9 meter versions, ULISSE can be extended up to 11 and 13.5 meters in length. In all lengths it can be made in the version with or without cabin with single or double work area. Special versions of this machine have been created for machining fiberglass, steel and all materials that can be machined with end mills. The tools are cooled with emulsified oil by means of pumps placed on the mobile carriage, but on request it can also be done by means of a water-oil group with a recycling pump. The Ulisse machining center is an industrial machine that offers high efficiency and precision. It is designed for CNC machining parts in a wide variety of materials, such as metal, plastic and wood.

Available in versions of 4, 7, 9, 11 and 13 meters also with double clamping and with supports for angular heads suitable for specific processes. Your basic tool changer includes 15 positions, but can be expanded to 30 upon request. The 300 x 640 mm machining section allows a wide range of operations to meet any need. Among its most notable features, PEGASO includes: a 400mm blade and a tool blade that can be combined with the 500mm accessory blade unit. PEGASO is perfect for facades, building profiles, automotive industry, lighting technology, railway sector and all light industries in general. The Pegaso machining center is a high-power, high-precision machine designed for CNC machining parts in various materials, such as metal, plastic and wood.