Heaters - Import export

Portable diesel heaters for heating closed spaces The portable diesel hot air heaters with smoke outlet, are ideal for heating indoor spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments have flue gas outlet and are suitable for any type of premises. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Electric heaters for any type of premises RP PROFESSIONAL electric heaters or heaters are robust and with the best components to obtain a fast, efficient and durable electric heating system. All models include, as standard, an ambient thermostat to start and stop the equipment once the desired temperature has been reached in the room and in this way optimize energy consumption. The 30 kW model can be applied to an external room thermostat with 10m of cable in case you want to control the room temperature at a point away from the equipment. Constructive details - Armored electrical resistance AISI 321 of high thermal exchange - Built-in room thermostat - Power selector - 1.5m electrical connection cable - Manual reset safety thermostat - Front protection grid - Channel up to 6m (except RP 33 M model) - Possibility of stacking several teams

Portable diesel heaters for heating open or properly ventilated spaces The portable diesel hot air heaters without smoke outlet are ideal for heating premises where there is proper ventilation or in open spaces. The equipment is totally portable and incorporates a fuel tank to obtain a correct autonomy of operation. The equipment incorporates a burner that provides a flame inside the combustion chamber that travels inside to obtain the greatest heat exchange. A fan providing air inside the equipment and when passing through the hot zones increases its temperature and is driven inside the room to be heated. These equipments do not have flue gas outlet and are only suitable for ventilated premises or open premises, therefore, their use in closed premises is totally prohibited. The equipment can be controlled with an ambient thermostat that is responsible for starting or stopping the equipment depending on the desired temperature.

Heating of mechanical and automotive workshops with hot air equipment with diesel operation The hot air generators with diesel operation of the VE series are the perfect solution for the heating of small mechanical or automotive workshops. The equipment will quickly and efficiently provide hot air to obtain a comfortable comfort temperature in a very short time. The team has a 35-liter fuel tank for a range of about 3-4 days. A powerful and silent fan provides the hot air necessary for heating premises of up to 150-175m2. The room thermostat incorporated in the equipment will be in charge of starting or stopping the equipment depending on the desired temperature and in this way the energy consumption of the equipment will be optimized. The installation is as simple as installing a smoke outlet to evacuate combustion gases outside the room to be heated and a single-phase electrical connection socket.

Hot air fan heaters with water coil (20 to 106 kW) - ATR The hot air heaters with hot water coil are ideal for heating all types of commercial, industrial or agricultural premises where a flow of hot air is required to heat different areas of the premises to be heated. The hot water must be produced by a diesel, gas or biomass boiler. The hot water, by means of a circulation pump, passes through the interior of the heating coil of the air heater and the heat transfer is carried out by the air fan of the air heater. The fan can be axial or centrifugal, the axial type is used for direct dissolution and the centrifugal fan allows a network of ducts to be applied in addition to having a greater reach.

Hot air heaters with gas operation from 23 to 34 kW The K gas hot air heaters are units that work completely autonomously, that is, they do not need heat dissipative elements, which reduces acquisition and installation costs. Its operation can be methane gas or propane gas and its operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air into adjacent areas where the equipment has been installed. - Combustion efficiency greater than 90%.

EFFECTS AND ADVANTAGES He prevents the user from falling down of the bed COMPOSITION 100%Polypropylene Magnetic clousure DIMENSIONS 75125cm MAINTENANCEThe articles don’t need an Spéciale maintenance. It just washes it periodically by hand or machine, with a temperature maximum of 40ºC. Dry in horizontal position without expose at directs sources of heat (stoves, heaters, etc.).

Industrial heating with hot air generators with pellet operation from 43 to 300 kW The hot air generators with pellet operation are fully automatic equipment used for heating industrial, agricultural and livestock premises. Its use is increasingly frequent thanks to its rapid depreciation and neutral CO2 emissions that contribute to the preservation of the environment. The equipment has a basic equipment designed for the use of granulated fuels, an automatic burner that allows the use of granulated fuel such as pellets, olive bone or almond shells. It also has an automatic ash extraction system to keep the combustion chamber in perfect condition and a smoke extractor to ensure proper depression in the combustion chamber. The equipment can be supplied with a fuel tank of 190 or 400 liters capacity with the possibility of applying larger storage systems such as canvas or work silos. The diffusion of the air can be with rotating nozzles or through air ducts.

Industrial wall mount heater with diesel operation The GS wall-mounted industrial heaters are units that operate completely autonomously, that is, they do not need heat dissipating elements, which reduces acquisition and installation costs. Its diesel operation is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated. The main advantages over other heating systems are: - They do not take up space on the floor. - Reduction of acquisition and installation costs. - Very fast heating system. - Air diffusion can be direct or a network of ducts can be applied to channel the air in adjoining areas where the equipment has been installed. - Efficiency of combustion of 92%.

The electric heating with infrared radiant panels of wave laga are a clean solution, without noise, without emission of light, economic and very comfortable to use n its design and manufacture, the utmost attention has been paid to obtain an aesthetic and effective equipment. The heat radiated from the panel surface is absorbed by people, walls, floors and furniture. Infrared heating does not cause air movement, which will make the air clean and no noise is emitted. Its high heat generation and excellent distribution allow the equipment to be used with less energy than other traditional heating methods. Radiant heat is very good for people′s health, it can change the body′s microcirculation, the cellular organization under the skin produces resonance, cleanses the microcirculation barrier, adjusts and balances the nervous system, promotes metabolism and increases physical power of the body.

Hot air heating with portable equipment with butane gas or propane gas for open or properly ventilated premises Hot air heaters with butane or propane gas operation are a really effective system for heating open or properly ventilated spaces. The equipment has a gas-operated burner, which provides an internal flame responsible for heating a small combustion chamber. The air driven by the fan passes through the combustion chamber and the hot air provided in this exchange is used to increase the temperature of the room to be heated.

Domestic heating with hot air boiler with diesel operation Hot air boilers with diesel operation are a fast and efficient system for heating domestic and commercial premises. The equipment has a soundproofed interior of the diesel burner so that its operation is as quiet as possible. It also incorporates a 3-speed fan to adjust the air flow according to the heating needs of the room to be heated. For its operation, a fuel tank, a smoke outlet and a single-phase connection socket are required. The diffusion of the hot air can be direct or with a network of ducts to direct the hot air to the different rooms to be heated.

Our modules to increase the air temperature incorporate a combustion chamber and heat exchanger with high thermal performance, it has an insulated exterior paneling and a temperature control panel to order the start and stop of the burner and the fan. Our modules to increase the temperature are designed to be applied in drying process facilities where it is required to increase the temperature of the air driven by an external air fan. Depending on the air flow, the thermal increase can range from 20ºC to 60ºC. The air flow treated by the equipment can range from 2,150 m3/h to 18,000 m3/h depending on the selected model. The fuel used by the burner can be diesel, natural gas or propane gas.

The ECO POL industrial wood stoves are designed for fast and efficient heating of all types of industrial, agricultural and livestock premises. The equipment incorporates a large combustion home where firewood or woody waste is introduced, once the combustion is carried out, the gases come into contact with a heat exchanger where heat transfer occurs with the air driven by a fan. The hot air is diffused in the room to be heated, obtaining a very fast and efficient heating system. With our industrial wood stoves, you will obtain a fast and efficient heating system, taking advantage of the woody waste produced in the manufacturing tasks (wooden pallets, wooden boxes, cardboard boxes, etc.). We have two models that provide a heat output of 50 and 100 kW that allow heating of 300 to 600 m2.

Industrial warm air heater with diesel or gas operation from 26 to 500 kW The MM hot air generators are indirect heating type equipment (the hot air does not mix with the combustion gases) and they work completely autonomously. They do not need additional elements for heat dissipation, a fact that reduces acquisition, installation and maintenance costs. Its operation is based on the heating of a certain air flow, through the combustion of diesel, natural gas or propane gas. Said flow is aspirated and driven by the fans that the equipment incorporates and that comply with the ERP 2020 regulations. The main advantages over other heating systems are: - Reduction of acquisition and installation costs - Very fast heating system - Air diffusion can be direct or a duct network can be applied - 90% combustion efficiency

High temperature heater for pest control and drying processes Our high temperature electric heater model KILL MANN is an equipment designed and manufactured for pest control and drying processes where hot air at high temperature is required. The electric heater can be placed inside or outside the space that we want to disinsect or dry. The hot air will be directed towards the room repairing the heat evenly in all the corners where the insects can be found. Heat sensitive material should be removed from the room as the temperatures reached can damage them. The insects will die at a temperature of 48 °C for 150 minutes but if we increase the temperature to 55 °C for 60 minutes it will cause the elimination of the pest in all its stages (egg, larva, chrysalis, fully developed insect) by destroying the proteins from the body, a decisive factor in successfully eliminating the pest.

Today the preparation of metallic samples is undertaken in many and varied ways - depending on the hardness of the metal -. Many times however it is necessary to previously heat the sample to soften the metal and thus facilitate afterwards the processing of the sample, whether by crushing or punching. The EQH-3.0 Induction Heater has been especially designed for heating lollipops and bars to soften them in a minute.