Results for
VINCO
Spain
composition : X10CrNi18-8 (NS / HS) According to EN 10270-3302 and AISI 302 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.
Request for a quoteVINCO
Spain
APPLICATION: Wire for alloy and non-alloy steel spring for use with severe dynamic stresses, such as prings for valves. According to EN 10270-2 and ASTM A 877
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
CHEMICAL COMPOSITION (HEAT ANALYSIS OF MARTENSITIC AND PRECIPITATION-HARDENED STAINLESS STEEL, FERRITIC STAINLESS STEEL AND AUSTENITIC STAINLESS STEEL) ACCORDING TO EN 10088-3
Request for a quoteVINCO
Spain
composition : X1NiCrMoCu25-20-5 According to EN 10270-7904L and AISI 904L The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.
Request for a quoteVINCO
Spain
composition : X5CrNi18-10 (NS / HS) According to EN 10270-6304 and AISI 304 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.
Request for a quoteVINCO
Spain
composition : X7CrNiAl17-7 According to EN 10270-5631 and AISI 631 The surface of the stainless steel wire must be smooth and, insofar as is possible, free of scratches, pitting and other surface defects that may make the wire unusable. The alternating torsion test is one method that makes it possible to detect surface discontinuities. If the wire is to be used for manufacturing springs that are used for high stresses, the special surface quality requirements and tests can be agreed on the customer's instruction when the quote is requested or the order is placed. SURFACE QUALITY EN 10088-3 Minor surface irregularities that are inherent to the manufacturing process are permitted. When necessary, it is possible to agree on more specific surface quality requirements when placing the order, based on the EN 10221 Standard.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VINCO
Spain
For final diameters between 1.50 mm and 8.00 mm and for the VD-type wires, the wire can be trimmed or straightened (shaved). According to EN 10270-2 and ASTM A 401
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are chiefly subjected to low static stress. According to EN 10270-1 and ASTM A 227
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high static stresses or, rarely, dynamic stresses.
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to high static stresses or moderately dynamic stresses.
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression or torsion springs that are subjected to medium-high dynamic stresses. Also for wire shapes that require severe bending. According to EN 10270-1 and ASTM A 227
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Tension, compression and torsion springs that are mainly submitted to high static strains and to medium levels of dynamic strains. EN 10270-1 ASTM A 228
Request for a quoteVINCO
Spain
APPLICATION OF HARD DRAWN STEEL WIRE Compression springs, extension springs,and torsion springs for high and dynamic stresses. According to DIN 17223:1964-1
Request for a quoteVINCO
Spain
APPLICATION: Suitable for static applications. According to EN 10270-2 and ASTM A 229
Request for a quoteVINCO
Spain
APPLICATION: Suitable for static applications. According to EN 10270-2
Request for a quoteVINCO
Spain
For final diameters between 1.50 mm and 8.00 mm and for the VD-type wires, the wire can be trimmed or straightened (shaved). According to EN 10270-2 and ASTM A 1000-5 Grade A
Request for a quoteVINCO
Spain
APPLICATION: Steel wire for spring with medium factigue levels, such as that required for alloy and non-alloy steel clutch springs According to EN 10270-2 and ASTM 2 A 1000-5 Grade D
Request for a quoteVINCO
Spain
APPLICATION: Wire for alloy and non-alloy steel spring for use with severe dynamic stresses, such as prings for valves. According to EN 10270-2
Request for a quoteResults for
Wires and cables- steel - Import exportNumber of results
32 ProductsCompany type