Stripping - Import export

CuSn6-R350 CuSn6-H080 CuSn6-R420 CuSn6-H125 CuSn6-R500 CuSn6-H160 CuSn6-R560 CuSn6-H180 CuSn6-R640 CuSn6-H200 CuSn6-R720 CuSn6-H220

EN AW-1050A (Al 99,5) - EN 485 0/H111 EN 485 EN AW-1050A (Al 99,5) - EN 485 H14 EN 485 EN AW-1050A (Al 99,5) - EN 485 H16 EN 485 EN AW-1050A (Al 99,5) - EN 485 H18 EN 485 EN AW-1050A (Al 99,5) - EN 485 H22 EN 485 EN AW-1050A (Al 99,5) - EN 485 H24 EN 485 EN AW-1050A (Al 99,5) - EN 485 H26 EN 485 EN AW-1070 (Al 99,7) - EN 485 0/H111 EN 485 EN AW-1070 (Al 99,7) - EN 485 H18 EN 485 EN AW-1070 (Al 99,7) - EN 485 H22 EN 485 EN AW-1070 (Al 99,7) - EN 485 H24 EN 485 EN AW-1200 (Al 99,0) - EN 485 0/H111 EN 485 EN AW-1200 (Al 99,0) - EN 485 H14 EN 485 EN AW-1200 (Al 99,0) - EN 485 H18 EN 485 EN AW-1200 (Al 99,0) - EN 485 H19 EN 485 EN AW-1200 (Al 99,0) - EN 485 H24 EN 485 FINISHES: Under a commercial agreement We are able to supply aluminium that can be anodised or is anodised We also offer the following material cleaning options (depending on the alloy): Wash Chemical degreasing

EN AW-5005 (Al Mg1(B) EN AW-5052 (Al Mg2,5) EN AW-5083 (Al Mg4,5Mn0,7) EN AW-5086 (Al Mg4) EN AW-5182 (Al Mg4,5Mn0,4) EN AW-5657 (Al 99,85 Mg1(A) EN AW-5754 (Al Mg3) / EN 485 series

EN AW-6016 (Al Si1,2Mg0,4) - EN 485 T4 EN 485 EN AW-6016 (Al Si1,2Mg0,4) - EN 485 T6 EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 O EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 T4 EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 T6 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 O EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T6 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T76 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T73 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 O/H111 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 H18 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 H24 EN 485 FINISHES: Under a commercial agreement We are able to supply aluminium that can be anodised or is anodised We also offer the following material cleaning options (depending on the alloy): Wash Chemical degreasing

EN AW-3003 (Al Mn1Cu) - EN 485 0/H111 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H14 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H16 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H18 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H24 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H26 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H111 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H14 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H22 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H24 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H111 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H18 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H24 EN 485"

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

FINISHES: SURFACE QUALITY PROPERTIES OF THE COATINGS GALVANISED STEEL according to EN 10142 Check our website for coating mass, coating finish, surface quality and protection surface treatment. If the customer does not require the surfaces to be oiled and/or chemically passivated, this must be clearly indicated when requesting the quote and placing the order. THICKNESS TOLERANCES Thickness tolerances according to EN 10143 for nominal widths. WIDTH TOLERANCES Tolerances on wide strips obtained by longitudinal cutting of a width of less than 600 mm.According to Standard EN 10143 of: w < 125; 125 w < 250; 250 w < 400; 400 w < 600. Other, closer dimensional tolerances under a commercial agreement. SAG TOLERANCES Edge curve tolerances under commercial agreement

SURFACE FINISH. APPROVED FINISHES EN 10202 Bright, Fine stone, Stone, Silver, Matt COATING. PRECISE VALUES FOR TIN COATINGS EN 10202 HICKNESS TOLERANCES Thickness tolerances and edge reduction according to EN 10202 The thickness of the material must meet the following requirements: a) Deviation from the agreed thickness, measured on the centre line of the strip, must not exceed ± 5%. b) Deviation from the agreed thickness, measured at any point at a distance of no less than 6 mm from the sheared edge, must be between +5% and -8%. WIDTH TOLERANCES Other, closer dimensional tolerances are possible under a commercial agreement. EDGE CAMBER TOLERANCES Tolerances for edge bending under commercial agreement.

TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

"TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

CuSn3Zn9-R430 CuSn3Zn9-H140 CuSn3Zn9-R510 CuSn3Zn9-H160 CuSn3Zn9-R580 CuSn3Zn9-H180 CuSn3Zn9-R660 CuSn3Zn9-H200

CuSn4-R290 CuSn4-H070 CuSn4-R390 CuSn4-H115 CuSn4-R480 CuSn4-H150 CuSn4-R540 CuSn4-H170 CuSn4-R610 CuSn4-H190

CuZn39Pb2-R360 CuZn39Pb2-H090 CuZn39Pb2-R420 CuZn39Pb2-H120 CuZn39Pb2-R490 CuZn39Pb2-H150 CuZn39Pb2-R560 CuZn39Pb2-H175

CuZn38Pb2-R340 CuZn38Pb2-H075 CuZn38Pb2-R400 CuZn38Pb2-H110 CuZn38Pb2-R470 CuZn38Pb2-H140 CuZn38Pb2-R640 CuZn38Pb2-H165

CuZn37-R300 CuZn37-H055 CuZn37-R350 CuZn37-H095 CuZn37-R410 CuZn37-H120 CuZn37-R480 CuZn37-H150 CuZn37-R550 CuZn37-H170

CuZn30-R350 CuZn30-H095 CuZn30-R410 CuZn30-H120 CuZn30-R480 CuZn30-H150 CuZn30-R550 CuZn30-H170 CuZn30-R630 CuZn30-H190

CuZn15-R260 CuZn15-H055 CuZn15-R300 CuZn15-H085 CuZn15-R350 CuZn15-H105 CuZn15-R410 CuZn15-H125 CuZn15-R480 CuZn15-H150 CuZn15-R550 CuZn15-H170

CuZn10-R240 CuZn10-H050 CuZn10-R280 CuZn10-H080 CuZn10-R360

THICKNESS TOLERANCES: According to the EN 10140:2006 Standard. Specified thickness tolerances for cold rolled strip and strip obtained strapping wide precision rolling w. WIDTH TOLERANCES: Width tolerances according to the EN 10140 Standard for nominal widths Other, closer dimensional tolerances are possible under a commercial agreement LENGTH TOLERANCES: According to the EN1040 Standard. Other tolerances are possible under a commercial agreement EDGE CAMBER TOLERANCES: Edge curve tolerances according to the EN 10140 Standard Other edge curve tolerances possible under a commercial agreement RIPPLE - LONGITUDINAL FLATNESS The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm over 1000 mm. Any other flatness

CuSn8-R370 CuSn8-H90 CuSn8-R450 CuSn8-H135 CuSn8-R540 CuSn8-H170 CuSn8-R600 CuSn8-H190 CuSn8-R660 CuSn8-H210 CuSn8-R740 CuSn8-H230

THICKNESS TOLERANCES: According to the EN 10140:2006 Standard. Specified thickness tolerances for cold rolled strip and strip obtained strapping wide precision rolling w. WIDTH TOLERANCES: Width tolerances according to the EN 10140 Standard for nominal widths Other, closer dimensional tolerances are possible under a commercial agreement LENGTH TOLERANCES: According to the EN1040 Standard. Other tolerances are possible under a commercial agreement EDGE CAMBER TOLERANCES: Edge curve tolerances according to the EN 10140 Standard Other edge curve tolerances possible under a commercial agreement RIPPLE - LONGITUDINAL FLATNESS The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm over 1000 mm. Any other flatness requirement must be agreed when placing the order.

TYPE OF PROCESS ROUTE AND SURFACE FINISH OF PLATES AND COILS EN 10088-2: 2H, 2D, 2B, 2R, 2G, 2J, 1D, 2E, 2K. Tinned or nickel plated strips can be supplied under a commercial agreement. The quality of the surface of a strip is characterised by the following approximate average surface roughness values: Ra < 0.3 µm for tensile strength levels of +C1150 and above. Ra < 0.5 µm for tensile strength levels ranging from +C700 to +C1000.

AW-2017A (Al Cu4MgSi(A)) - EN 485 O EN 485 AW-2017A (Al Cu4MgSi(A)) - EN 485 T4 EN 485 AW-2024 (Al Cu4Mg1) - EN 485 O EN 485 AW-2024 (Al Cu4Mg1) - EN 485 T4 EN 485

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148