Bands - Import export

Special anchor bands for tutored in vineyards, olive groves, fruit trees and general purpose. Very high elongation. They are presented in boxes of each size, or in two large bags or the same amount in small bags.

High-quality apron in TC material - combination of cotton and polyester-. In a wide range of bright tones, with double front pocket and adjustable neck straps. Fitting under the knee. TC. 20% Cotton/ 80% Polyester

Fun classic classic whistle design in a wide range of bright tones with matching color neckband.

Events, synthetic fiber bracelet for adult in a wide range of bright tones. With adhesive closure, waterproof and presented in 10 pieces die-cut sheet with individual numbering. One Size. Adult. Safety Catch Tyvek® Material

EN AW-6016 (Al Si1,2Mg0,4) - EN 485 T4 EN 485 EN AW-6016 (Al Si1,2Mg0,4) - EN 485 T6 EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 O EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 T4 EN 485 EN AW-6082 (Al Si1MgMn) - EN 485 T6 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 O EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T6 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T76 EN 485 EN AW-7075 (Al Zn5,5MgCu) - EN 485 T73 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 O/H111 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 H18 EN 485 EN AW-8011A (Al FeSi(A)) - EN 485 H24 EN 485 FINISHES: Under a commercial agreement We are able to supply aluminium that can be anodised or is anodised We also offer the following material cleaning options (depending on the alloy): Wash Chemical degreasing

EN AW-5005 (Al Mg1(B) EN AW-5052 (Al Mg2,5) EN AW-5083 (Al Mg4,5Mn0,7) EN AW-5086 (Al Mg4) EN AW-5182 (Al Mg4,5Mn0,4) EN AW-5657 (Al 99,85 Mg1(A) EN AW-5754 (Al Mg3) / EN 485 series

EN AW-3003 (Al Mn1Cu) - EN 485 0/H111 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H14 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H16 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H18 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H24 EN 485 EN AW-3003 (Al Mn1Cu) - EN 485 H26 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H111 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H14 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H22 EN 485 EN AW-3005 (Al Mn1Mg0,5) - EN 485 H24 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H111 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H18 EN 485 EN AW-3105 (Al Mn0,5Mg0,5) - EN 485 H24 EN 485"

AW-2017A (Al Cu4MgSi(A)) - EN 485 O EN 485 AW-2017A (Al Cu4MgSi(A)) - EN 485 T4 EN 485 AW-2024 (Al Cu4Mg1) - EN 485 O EN 485 AW-2024 (Al Cu4Mg1) - EN 485 T4 EN 485

EN AW-1050A (Al 99,5) - EN 485 0/H111 EN 485 EN AW-1050A (Al 99,5) - EN 485 H14 EN 485 EN AW-1050A (Al 99,5) - EN 485 H16 EN 485 EN AW-1050A (Al 99,5) - EN 485 H18 EN 485 EN AW-1050A (Al 99,5) - EN 485 H22 EN 485 EN AW-1050A (Al 99,5) - EN 485 H24 EN 485 EN AW-1050A (Al 99,5) - EN 485 H26 EN 485 EN AW-1070 (Al 99,7) - EN 485 0/H111 EN 485 EN AW-1070 (Al 99,7) - EN 485 H18 EN 485 EN AW-1070 (Al 99,7) - EN 485 H22 EN 485 EN AW-1070 (Al 99,7) - EN 485 H24 EN 485 EN AW-1200 (Al 99,0) - EN 485 0/H111 EN 485 EN AW-1200 (Al 99,0) - EN 485 H14 EN 485 EN AW-1200 (Al 99,0) - EN 485 H18 EN 485 EN AW-1200 (Al 99,0) - EN 485 H19 EN 485 EN AW-1200 (Al 99,0) - EN 485 H24 EN 485 FINISHES: Under a commercial agreement We are able to supply aluminium that can be anodised or is anodised We also offer the following material cleaning options (depending on the alloy): Wash Chemical degreasing

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Electrolytic s/EN 14436 and Hot dip s/EN 13148

EFFECTS AND ADVANTAGESMaintain, with flexibility orfirmness the 2 wrists. COMPOSITIONFoam, antelina, velour. Magnetic closure DIMENSIONS Universal size MANTENTEINANCE They do not need an Spécialemaintenance. It just washes itperiodically by hand or machine,with a temperature maximum of40ºC. Dry in horizontal positionwithout expose at directs sourcesof heat (stoves, heaters, etc.).

EFFECTS AND ADVANTAGESMaintain, with flexibility orfirmness the 2 wrists. COMPOSITIONCotton and polyester Ironclip DIMENSIONS Universal size MANTENTEINANCE They do not need an Spécialemaintenance. It just washes itperiodically by hand or machine,with a temperature maximum of40ºC. Dry in horizontal positionwithout expose at directs sourcesof heat (stoves, heaters, etc.).

EFFECTS AND ADVANTAGESAdaptable to the contour of the foot. It contains therein a pad of medical Extra soft silicone. It helps reduce calluses while relaxing the metatarsal area.COMPOSITION60% Lycra, 40% silicone. MAINTENANCENever apply the product on an open wound and watch the foot during use. Wash with mild soap and water. Allow to air dry. Do not bring heat sources.

Contains a large assortment of: jewelry, bracelets, earrings, necklaces, rings - Tweezers, clips, pigtails, headbands, pigtails set, buckles, headbands, bands ... Minimum order 1 pallet with 20000 units. Assorted pallet with jewelry and hair accessories at only € 0.08 the best price and the best quality Only new product. Contact us for larger quantity orders. All merchandise is new. More than 500 different models. Our lots sell out quickly, if you are interested do not think about it. WE DO NOT RESERVE - WE DO NOT ACCEPT RETURNS.