Smoothing tools - Import export

TECHNICAL DEFINITION Cement-based powder filler with fibres for treating damaged exterior substrates. The filler is multi-purpose: can be used to fill, repair and rectify wall surfaces, with a smooth finish. SUITABLE SUBSTRATES All types of substrates : cement, concrete, concrete blocks, stones, brick, old paintwork, old tiling. COVERINGS Once the filler is completely dry, can be covered with all types of coatings and paintwork. Do not directly cover with solvent-borne paint. TECHNICAL FEATURES • Setting time: 30 to 40 minutes • Adhesion: complies with EN 16566 • AFNOR NFT 36.005 classification: Family IV class 4c MIXING PROPORTIONS • 6 to 6.5 litres of water per 15 kg bag • 2 to 2.2 litres of water per 5 kg bag • 0.4 - 0.43l of water for 1 kg • 2 volumes of water for 5 volumes of powder APPLICATION Application with a plastering spatula, knife, smoothing trowel. Clean tools with water. COVERAGE Approximately 1 kg per m²/mm of thickness.

ar feeder for special profiles wanted ? To extend the MULTI 3000 to the bar feeder for special profiles, the Uni-erector can be mounted optionally. It enables the erection of rectangular profiles and special profiles for further transport to connected machine tools. Thus a smooth reloading process is possible. By simply setting a parameter, the erector can be selected or deselected. This enables a quick changeover from round material to a special profile. By deactivating it, the bar loader can load round or hexagonal material as normal. While with activated parameter the bar feeder will load the special or rectangular profile while the reloader is erecting. The use of square material is also optionally possible. The erector consists of two opposite rollers. To erect the material, these rollers move together during reloading. When the bar is threaded into the machine tool, the rollers open again. The distance between the rollers can be easily adjusted.

ECOROLL's OMEGA system combines skiving and roller burnishing for machining hydraulic cylinders and cylinder liners. While the OMEGA skiving head cuts the cylinder's inner surface to the exact size and form required, the roller head burnishes it. The simultaneous skiving and burnishing process has almost completely replaced honing as the alternative machining process, since it is much more economic and faster. Thanks to its modular design, customized tools can be configured based on pipe quality and machining length. Sometimes for various reasons, tubes have to be skived and burnished separately or both processes have to be carried out one after the other. Therefore, all SK skiving heads can be delivered also as separate tools. SK skiving heads are then used in conjunction with GZ roller burnishing tools. In the first pass the SK skiving head peels the cylinder, and in the second pass the GZ tool burnishes it smooth.

The 26mm RipCap® is an easy-to-use ring pull cap, suitable for use on a wide variety of beverages in bottles with a standard crown cap mouth. RipCap® closures offer a safe and convenient alternative to standard crown caps. -The RipCap's shell and ring can be decorated with own design. It differentiates product packaging with an innovative opening experience, audibly and visually. -The RipCap® offers excellent product protection. It is highly tamper-evident in a one-piece closure. Also, it is safe to use, it will not corrode or contaminate contents. -RipCap® ring pull caps are easy to open: place a finger through the ring, then pull out, up and off, in a single smooth flowing action. No tools required. -Utilising specially tempered aluminium, and selected sealing and lining systems, the RipCap® closure is suitable for carbonated and still products. It can withstand normal forces encountered with pasteurisation, hot fill and sterilisation processes.

The RipCap® 42mm closure is an easy-to-use, wide mouth ring pull cap suitable for use on a wide variety of beverages. It offers a safe and convenient alternative to standard bottle caps. RipCap® differentiates product packs with an innovative opening experience, audibly and visually. The shell and ring pull can be branded with own design. The wide mouthed smooth container finish offers a high level of drinkability. RipCap® ring pull caps offer excellent product protection. It is highly tamper-evident in a one-piece closure. Will not corrode or contaminate contents. The RipCap® is easy to open; place a finger through the ring, then pull out, up and off, in a single smooth flowing action. No tools required! Utilising specially tempered aluminium, and selected sealing and lining systems, the wide mouth RipCap® closure is suitable for carbonated and still products, and can withstand normal forces encountered with pasteurisation, hot fill and sterilisation processes.

Thread standard: Metric, ISO DIN 13 Type: Round die Application: For brass Material of product: HSS Spiral entry: yes For materials: Brass (short and long chipping) Tensile strength up to: Standard: DIN 223 Tolerance: ISO-6g Special geometry for brass. Lapped for sharp cutting edges, smooth surface and increased tool life time. Round dies are cylindrical and are used for making external threads in one operation. They have - depending on the size - three or more cutting edges inside. The holes between the cutting edges receive the chips, roll them and discharge them. Dies are used to cut screws, nuts and threaded rods in everyday use. The die holder is used to cut the threads by hand and with the special die holders you can also attach the round die to a tailstock or to a drill. The dies can usually be used on both sides and have a perfect cut. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads.