Smoothed pipes - Import export

Air-water / air-air heat exchanger as smooth tube heat exchanger up to 1,000 ° C Smooth tube heat exchanger as an air / water heat exchanger In the case of air-water heat exchangers (also called gas-water heat exchangers), a temperature exchange takes place between a gas (usually air) and a liquid. As a rule, the liquid medium flows inside the pipes, while the gaseous medium flows around the pipes outside the pipes. Smooth tube heat exchangers can cover various areas of application: heating, cooling and condensing as well as heat recovery. Smooth tube heat exchanger as air-to-air heat exchanger Smooth tube heat exchangers are also often used as air-to-air heat exchangers. In this application, a gas (e.g. exhaust air or exhaust gases) flows inside the pipes and a gas (e.g. fresh air) outside the pipes around the pipes.

NSPV PVC Inspection Tee Conduit Fittings Features: AS/NZS 2053.2:2001 standard; T Shaped, 3 Way for connecting three pipes; Smooth interior finish for reduced friction and material buildup.

Properties Rapid and flexible solution for temporary placement of the vibrator Sturdy and simple construction Simple connection, together with a vibrator to a compressed air supply Field of application Any place where short term vibrating needs to be carried out On silos, transport container or pipes A smooth, neat and not too curved surface improves the grip of vacuum mountings

Installation of new PE-100 RC pipes as a pipe string (long pipe) Pipe installation via a starting manhole from 1 m diameter Installation length up to 150 m New pipes OD 192, 242 and OD 292 Tight in pipe means only minimal cross-section loss and small annular space without filling The hydraulic capacity of the new pipe can be in-creased by using pipes with smooth interior lining House connections can be connected without the need for trenches

PipeStrand® S2300 is made for fabricators that want to reduce material cost, while increasing the performance of their filament wound products. Designed to increase production efficiency, while providing excellent hydrothermal stability under pressurized conditions. OUTSTANDING MECHANICAL PROPERTIES Excellent properties in both amine and anhydride curing systems; improved axial tensile strength, interlaminate shear strength and burst stress for high performance filament wound epoxy applications. REDUCE COST Designed for use in filament winding, in both epoxy amine and anhydride curing systems — giving flexibility with one glass input and higher glass loading. GREAT STRAND WETOUT Excellent processing range, fast wetting and smooth pipe surface. LONG SERVICE LIFE Excellent hydrothermo stability and strength retention under pressurized conditions, leading to long service life for installed pipe.

Two methods are used to bend pipes at a certain angle, hot and cold. We provide cold-bending pipe services. Products made of plastic metals and alloys lend themselves well to this technology. Bending pipes by this method is possible only if their diameter does not exceed 100 mm. This type of machining is done manually or through special bending machines. When bending round pipes, it is essential to avoid dents that decrease their inner diameter. The pipes should have smooth bends along a certain radius and a circular shape in the bend areas. Our pipe bending machines allow you to get a quality bend in a few rolls.

Rolled aluminum is in demand and is applicable in production, construction and in everyday life, chemical laboratories, medical institutions. An important quality of aluminum is its weight and resistance to aggressive environments. Aluminum, if used correctly, will be an excellent durable material; it is processed mechanically on special equipment. The following types of rolled metal products are made C652from it aluminum sheet GOST 21631 (corrugated), corner, channel, Tavr, I beam, circle, pipe, wire, as well as from aluminum alloys produce various foundry products for production and household needs. Aluminum section metal products are produced by hot rolled (hot rolled) and cold rolled (cold rolled) methods, general and technical. application. Aluminum alloys Primary aluminum index A, with a max aluminum content of 99.5%; Aluminum technical AD with a high content of Fe and Ci from it are made aluminum sheets smooth, corrugated, pipes, packages, corner;

Cable chambers for power and telecommunication networks are plastic chambers, intended for nodes of power cables, optic fibre cables and other cables. Advantages of PE cable chambers: long life (manufacturer guarantees material life expectancy of 50 years), water tightness, simple transport, simple manual handling, quick and simple installation, quick and simple adjusting of installation height, option of various combinations of inlet and outlet connections along the chamber body, quick and easy installation of connections along the chamber body, simple addition of new, additional connections, possibility of installation of a cast iron cover or PE cover. Possibility of connection of various types of protective pipes: PVC smooth and corrugated pipes, PE smooth and corrugated pipes, PP smooth and corrugated pipes. Possibility of connection of various dimensions of protective pipes: standard connections from ø32 to ø200, other dimensions at the request of the client.

Refra cold water tanks with an operating pressure of 6 to 10 bar are used to increase the amount of liquid in the refrigeration systems and can be produced as system component or a completely separate product. The water tank with possible 300-3000 liters capacity will help to keep a constant cooling cycle, thus stabilizing unit operation and avoiding poor water temperature control. Cold water tanks can also be used for water flow separation. A built-in separation plate or a blast pipe ensures smooth operation of the unit and maintains consistent water temperature in the system. This feature gives the opportunity to regulate the volume of liquid, used for different circuits. The tank is made of carbon S235JR or 304/316L stainless steel, externally insulated with an additional layer of ArmaFlex and lined with a high-quality blue dermatine fabric. Both vertical and horizontal tank positioning is possible together with threaded, flanged or victaulic joints.

Telecommunication pipe – cable conduits made of PE-HD on drums or in coils Z.I.S. cable conduits made of PE-HD, manufactured acc. to DIN 16874 with external supervision by MPA, Darmstadt or DIN 16876 Standard design: Material: PE-HD according to DIN requirements Colour: black Inner surface: inside grooves, to reach max. pulling-in and blowing-in length Delivery type: on rental drums or in coils Labelling: to DIN requirements Possible designs: Material: PE80/PE100 acc. to DIN 8074/8075 Coloured: coextruded stripes Outer surface: coloured co-extruded or solid dyed Inner surface: smooth Type: composite pipes – side by side, parallel, loose wound on reel Delivery type: one-way-drums Individual length: on drums or in coils Labelling: acc. to customer specifications SDR types: SDR 33 – SDR 11

Fernco's range of saddles for smooth PVC pipes are a more flexible option than pipe junctions when connecting lateral (or branch) pipes into main drain pipelines.

The exclusive MASTER 3 sound-insulating drain system from SANHA consists of high-quality three-layer pipes and modern fittings. The drain pipes are constructed with three perfectly matched layers that work together to meet all the demands that a drain system is subjected to in the construction of a modern house, apartment and industrial building. Each layer optimises the properties of the pipe: The smooth inner layer prevents encrustations and is partly responsible for the good sound insulation properties. The solid middle layer is extremely robust and the brown outer layer provides excellent impact resistance even at low temperatures. The sealing ring consists of styrene-butadiene rubber (SBR).

The Helicoid monotube heat exchanger, operating by means of counterflowing cooling or heating fluids, has an exceptionally high heat exchange coefficient, due to the special corrugated profile of the two concentric stainless steel pipes. This considerably reduces the exchange surface compared with conventional smooth pipe heat exchangers. A wide range of original applications are available. This is the only tubular heat exchanger for the homogeneous cooling or heating of grape mash (with or without stalks), fruit pulp and other products containing suspended solids or fibres (up to 25-30%). It is therefore ideal for: • in-line chilling of white grape mash at 15°C, to prevent fermentation before pressing • instantaneous chilling of black grape mash at 25°C • black grape mash fermentation control by means of by-pass circulation. Made entirely in AISI 304 stainless steel Supplied on request with effective insulation by injected expanded polyurethane and a stainless steel cover

pipes (aluminium) - ends cleanly deburred - supplied in trade length of 6 m Ø (mm) FR.038.015.AL 38 x 1.5 FR.040.015.AL 40 x 1.5 FR.045.015.AL 45 x 1.5 FR.050.015.AL 50 x 1.5 FR.050.020.AL 50 x 2.0 FR.054.020.AL 54 x 2.0 FR.060.015.AL 60 x 1.5 FR.060.020.AL 60 x 2.0 FR.065.020.AL 65 x 2.0 FR.070.020.AL 70 x 2.0 FR.076.025.AL 76 x 2.5 FR.080.020.AL 80 x 2.0 FR.090.020.AL 90 x 2.0 FR.100.020.AL 100 x 2.0 FR.108.030.AL 108 x 3.0 FR.114.030.AL 114 x 3.0 pipes (stainless steel) - longitudinal seam-welded pipes - smoothed inner seam - ends cleanly deburred - supplied in trade length of 6 m Ø (mm) FR.038.015.CR 38 x 1.5 FR.040.015.CR 40 x 1.5 FR.045.015.CR 44.5 x 1.5 FR.050.015.CR 50 x 1.5 FR.054.020.CR 54 x 2.0 FR.060.015.CR 60.3 x 1.5 FR.060.020.CR 60 x 2.0 FR.063.015.CR 63.5 x 1.5 FR.065.015.CR 65 x 1.5 FR.070.020.CR 70 x 2.0 FR.076.020.CR 76.1 x 2.0 FR.080.015.CR 80 x 1.5 FR.080.020.CR 80 x 2.0 FR.084.020.CR 84 x 2.0 FR.085.020.CR 85 x 2.0 FR.089.020.CR 88.9 x 2.0 FR.100.015.CR...