Smd technology - Import export

IST AG offers wireless RTD Platinum SMD sensors for automatic PCB assembly processes with wrap-around contacts on both ends. We offer different SMD technologies for different applications and temperature ranges, e.g. SAC305-tinned wrap-around contacts for the normal PCB assembly process, high temperature solder wrap-around contacts for high temperature applications up to +250 °C or Ni/Au wrap-around contacts for special requirements or wire bonding applications. The SMD sensors are available with various accuracies of up to IEC 60751 F0.15 (IST AG reference class A) and in different dimensions (0805/1206) with other dimensions upon request. SMD sensors are characterized by excellent long-term stability, fast response time and low self-heating.

IST AG offers wireless RTD Platinum SMD sensors for automatic PCB assembly processes with wrap-around contacts on both ends. We offer different SMD technologies for different applications and temperature ranges, e.g. SAC305-tinned wrap-around contacts for the normal PCB assembly process, high temperature solder wrap-around contacts for high temperature applications up to +250 °C or Ni/Au wrap-around contacts for special requirements or wire bonding applications. The SMD sensors are available with various accuracies of up to IEC 60751 F0.15 (IST AG reference class A) and in different dimensions (0805/1206) with other dimensions upon request. SMD sensors are characterized by excellent long-term stability, fast response time and low self-heating.

IST AG offers wireless RTD Platinum SMD sensors for automatic PCB assembly processes with wrap-around contacts on both ends. We offer different SMD technologies for different applications and temperature ranges, e.g. SAC305-tinned wrap-around contacts for the normal PCB assembly process, high temperature solder wrap-around contacts for high temperature applications up to +250 °C or Ni/Au wrap-around contacts for special requirements or wire bonding applications. The SMD sensors are available with various accuracies of up to IEC 60751 F0.15 (IST AG reference class A) and in different dimensions (0805/1206) with other dimensions upon request. SMD sensors are characterized by excellent long-term stability, fast response time and low self-heating.

Headlamps are among the most useful tools everyone should have. The uttermost priority in the Ronix is producing high-quality tools with longer service life, and for sure, to suit the needs of a wide range of users. In this regard, the Ronix LUMEN headlamp series offers compact and wide beam tools useful for different applications. Ronix Headlamp 160LM uses LED bulbs with SMD technology to guarantee the maximum brightness and longer lifetime. Besides, this powerful headlamp is ideal for middle-range activities with its 150 meters illumination range. The resistant metal body of Ronix RH-4282 headlamp is the other advantage of this tool to its peers

A lightweight, handy spotlight for everyone with every need. No matter what you do and where you go, you will need one of these spotlights to deal with the darkness. Ronix RH-4230 LED Flashlight is an excellent and professional spotlight with a flashlight and SOS light functions. This tool comes in handy in many places and situations, such as houses, gardens, facilities, factories, outdoor camping, and hiking. RH-4230 has an ultra-long illumination range of up to 500 meters. Its High-efficiency LEDs with two brightness settings help you adjust the brightness according to your needs and save battery life. This spotlight is equipped with SMD technology for maximum brightness and a longer lifetime. An SOS mode is applied to flash red in times of emergencies. There are lots more features that this LED flashlight offers to the customers.

The CEL-T series LED high bay offers a light output of 140 lm/W. The aluminium design and manufacture of its structure achieve the best cooling capacity. Its specifications and the use of SMD LED technology through the use of specialised optics offer safety and comfort in businesses, maintaining a 70% light level and with a five-year warranty.

Double the light in shelving areas and corridors The high bay linear led LEN T series is a dimerizable linear led with optics capable of increasing the 100 lux (2) of a conventional luminaire 120° in 2501ux (3) in the aisles between shelves. SMD LED technology and specialized lenses redirect the beam of light to the useful area of the corridors and they confer a much higher efficiency, luminous comfort and uniformity. It has several fixing options: hanging, articulated or fixed. NF2L757DR Japanese technology with high efficiency and durability. The High bay linear LED are designed for installation in logistics centers and shops, they generate a rectangular lighting pattern that fits perfectly in the transit area.

Designed for replacement at gas stations The PRG series projector is a LED projector with built-in frame designed to be embedded in the canopies of gas stations. His design and the PCB gives you the best light uniformity and possible thermal dissipation. The implementation of SMD LED technology through the use of lenses specialized provide light comfort far superior to the LED design conventional. Osram Duris S5 german technology of high efficiency and durability. Do not adapt a conventional LED projector to an awning, the PRG LED projector for service station shelters has accessories specifically designed to be integrated and completely fixed to this type of ceiling. Improve the security of your installation.

With cast aluminum body, powder coating and spray lacquer electrostatic anti-aging. This anodized aluminum reflector is protected by a tempered glass which gives it great resistance to corrosion. This luminaire is perfectly designed to be installed vertically and horizontally in 60mm diameter rods. The Inventronics driver offers high reliability to medium and long term, remote management possible. The Solbis® LED road luminaire offers high-performance light efficiency of up to 135lm / W thanks to the Nichia SMD LED technology of its lenses. All lenses certify an IK08 protection, providing the Solbis® LED street light with great safety and robustness throughout the whole.

An attractive, efficient and quality design The PRM7 series projector has been designed to obtain a superior thermal performance, the dimensions of the PCB gives you the best uniformityand low glare, with a large operating margin between temperature environment and chip connection (Tj), all with IP 66 protection. The implementation of 130lm / W SMD LED technology through the use of specialized lenses, provides superior light efficiency. NF2L757DR Japanese technology of high efficiency and sustainability. The angle of inclination can be adjusted with great precision, it is sufficient to slightly loosen the central bolt and change the inclination with an interval of ± 90 °, it is not necessary to remove the bolt because it offers a high degree of safety during installation.

The high bay LED linear series LEN D1, is an LED that allows us to increase the 100Iux of a conventional luminaire of 120° in 2501ux in the aisles between shelves. SMD LED technology and specialized lenses redirect the light beam to the useful area, give it an efficiency, comfort luminance and very superior uniformity. Its Mean Well ELG driver can be controlled through the DALI protocol. The hood has the data bus for this connection. NF2L757DR Japanese technology with high efficiency and durability. The selection of an adequate optics according to the height and width of the corridors, in combination with the presence detection system, will reduce the energy consumption where it is not necessary. Detection of presence up to 15 meters high.

Guarantee of light comfort and durability The PTF series LED tubular display is a luminaire with a steel body stainless, designed to withstand demanding environments, with a high level of tightness and an IP69K rating, an K08 protection level It works in environments with water, dust, moisture and corrosion. It implements SMD LED technology, wich through its specialized lens, allows you confers high light comfort and a uniformity far superior to the desig conventional LED. It is a lasting lighting in fermentation zones and cleaning, farms, livestock and food processing.

PRF Series An attractive, efficient and quality The PRF7 series projector has been designed for performance superior thermal, the dimensions of the PCB gives you the best uniformity and low glare, with a large operating margin between temperatura environment and chip connection (Tj), all with IP 66 protection. The implementation of 130lm/W SMD LED technology through the use of specialized lenses, provides superior light efficiency. NF2L757DR japanese technology of high efficiency and durability. The angle of inclination can be ajusted with great precision, you only need to loosen a bit the central bolt and change the inclination with a range of ± 90°, since you do not have to remove the bolt it provides a high degree of safety during installation.

Minimalist design, efficient and clean The LDS series LED linear high bay is the perfect solution to form a efficient linkable linear lighting system in supermarkets, large or medium stores, etc. Through which we will obtain a outstanding performance. The LED modules, the power line and control is integrated in the luminaire, facilitating its installation. Made of aluminum alloy. Implements SMD LED technology by using specialized lenses, they allow you to fully illuminate the aisle and shelves, only shelves on both sides or on one side only. NF2L757DR japanese technology of high efficiency and durability. In the LDS LED linear luminaire the LED modules, the power line and the control are integrated in the luminaire, facilitating its installation.

The projector series PRE is an economical projector with an ultra-thin design and superior thermal performance. This projector is the solution to all your outdoor lighting needs thanks to its IP66 and IK08 protections. Our innovative optics system will serve to cover any area you want to illuminate very evenly. The implementation of SMD LED technology through the use of lenses Specialized provide superior light efficiency. NF2W757GRT-V3 Japanese technology of high efficiency and durability. The new LED projector serie PRE has been specially designed to ensure excellent performance on sports courts and advertising spaces. With more industrial design, the PRE Series LED projector maintains the same levels of safety, durability and warranty as PRM Series LED projectors, at a lower cost.

Ultrathin design, clean and durable The CDS series LED Design & Food high bay is the most attractive solution for use in food processing environments open to the public and other areas, where a design luminaire or certification is required according to NSF standards. Its optical closures has the requirement 'without glass' for food areas. Made by alloy alumium, with a very defined and quality finish, its angle down without grooves and its stainless Steel screws that are not exposed to corrosión, ensure that no residue will remain after washing. NF2L757DR Japanese technology of high efficiency and sustainability. The CDS-T LED high bay adopts SMD LED technology through the use of specialized lenses with IK10 protection. All of them meet the requirement of “Without glass”, a necessary safety element in food processing.

Corridor lamp that does not leave you without light. The linear high bay LED LEN-Y, is a linear lamp that in most critical moments acts as an emergency light. It uses optics that focus the 100lux (2) of a conventional 120º to 250lux (3) luminaire between shelves. The SMD LED technology and specialized lenses redirect the light beam towards the useful zone of the corridors and confer a great comfort of light. 1) Emergency module operation indicator. 2) Push button to enable the emegency function. NF2L757DR Japanese technology with high efficiency and durability. Led linear lighting, specifically designed for aisle area between shelves: it provides greater energy savings and also a higher level of brightness, because we vectorize the light beam thanks to the use of specialized optics.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position ring, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a displacement signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a digital measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to a measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.

The displacement transducers operate according to the principle of run time measurement between two points of a magnetostrictive waveguide. One point is determined by a moveable position magnet, whose distance from the null point corresponds to the section to be measured. The run time of an emitted impulse is directly proportionate to this section. Conversion to an analogue measuring signal takes place in the downstream electronics. The waveguide is housed in a pressure-resistant stainless steel tube or extruded profile. To the rear of this is a die-cast aluminium housing containing the electronics in SMD technology. Electrical connection is implemented via a circular connector. In the rod version, the position magnet is located in a ring, which is guided over the rod without contact. In the profile version, it is located either in a slider, which is linked to the moving part of the machine via a ball joint, or it moves as a liftable position magnet, without wear, over the profile.