Filter elements - Import export

We are producing replacement filter elements according to ISO 8573-1. Alternative filters are tested by IUTA. Discover our range of replacement filters: ABAC, AGRE, AIRFILTER ENGINEERING, ALMIG, ALUP, ATLAS COPCO, ATS, BALMA, BEA, BEKO, BOGE, CECCATO, CHAUMECA, CHICAGO PNEUMATIC, CKD, COMPAIR, CTA, DELTECH, DOMNICK HUNTER, DONALDSON, EKOMAK, FIAC, FINITE, FUSHENG, HANKISON, HIROSS, HITACHI, INGERSOLL RAND, KAESER, KNOCKS, KOBELCO, KSI, MARK, MATTEI, MAUGUIERE, MIKROPOR, OMI, ORION, PNEUMATECH, PREVOST, PUSKA, SCHNEIDER, SMC, SPX NGF, SULLAIR, WALKER, WORTHINGTON CREYSSENSAC, ZANDER, ZONDER.

SPF stainless steel sterile filter housings are specially designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with appropriate filter element. SPF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is filter head on the bottom and filter bowl on the top. Fluid group 1 on request.

HPF process filters are designed for high pressure applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with 9 different grades of filter elements. HPF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is bowl on the top and filter head on the bottom. Fluid group 1 on request.

AAFs filters are designed for applications in paint industry. Quantity of substances that could cause impairments in paint wetting applications or cause defects in paint work have been reduced to a minimum. To meet the required compressed air quality appropriate “paint compatible” filter element must be installed into filter housing.

AAF HT series - Aluminium high temperature compressed air filters are designed for very high efficient removal of solid particles, water and oil aerosols, from compressed air systems in high-temperature applications. To be able to achieve the required compressed air quality, an appropriate filter element (BHT, N25HT, N5HT, XRHT, XMHT, XSHT) must be installed into the filter housing.

WFIT welded stainless steel filters with threaded connections are designed for protection of the downstream compressed air system and equipment against defects and other failures. They are used for filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing.Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

WHFIT process filter housings are designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. WHFIT process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is filter head on top and filter bowl on bottom. Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Fluid group 1 on request.

PF process filters are designed for applications in process industry, where the risk for corrosion of compressed air system components is very high. Required compressed air quality according to standard ISO 8571-1 can be achieved with 9 different grades of filter elements. PF process filter housing can be used in variety of applications. For applications not listed please contact us or your local distributor. For any other technical gas please contact us or your local distributor. For oil removal, coalescing filter element must be installed and flow direction inside-out must be provided. General arrangement is bowl on the top and filter head on the bottom. Fluid group 1 on request.

Pressure drop indicator PDI 16 is designed to indicate pressure drop across the filter element in compressed air system. It detects when the filter cartridge is clogged and should be replaced. PDI 16 is typically installed on the head of the filter housing. PDI 16 can be used in variety of applications.

Magnetic differential manometer MDM 40 is designed to indicate pressure drop across the filter element in compressed air system. For any other technical gas please contact us or your local distributor. It detects when the filter cartridge is clogged and should be replaced. MDM 40 is typically installed on the head of the filter housing. MDM40 can be used in variety of applications.

HF filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from compressed air systems. To meet the required compressed air quality appropriate filter element (B, P, R, M, S, A) must be installed into filter housing. Optional external condensate drains should be used for efficient condensate draining from filter housing.

Magnetic differential manometer MDH400 is designed to indicate pressure drop across the filter element in compressed air system. It detects when the filter cartridge is clogged and should be replaced. MDH400 is usually installed on the head of the filter housing. Double dials on manometer allows readout values from both sides of the differential manometer. Thanks to resistance stainless steel housing is also suitable for demanding applications.

M-VAC filters are designed for medical vacuum applications. Medical vacuum filters are optimized for high efficient removal of bacterial and other contamination (solids and liquids) from the suction side of vacuum pumps preventing damage to the pump and the potential biological infection of the surrounding environment. Removed liquids are collected in a transparent flask which can be removed for sterilisation. The efficiency of the installed filter elements exceeds the 0,005 % penetration specified in HTM 2022 for infectious disease units, when tested in accordance with BS 3928.

CHP carbon steel high pressure filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from high pressure compressed air systems up to 420 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drain should be used for efficient condensate draining from filter housing.

IHP stainless steel high pressure filters are designed for high efficient removal of solid particles, water, oil aerosols, hydrocarbons and other vapours from compressed air systems up to 420 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (N5, N25, M, S and A). Optional external condensate drain should be used for efficient condensate draining from filter housing.

WFIW welded stainless steel filter housings have been specifically developed for filtration of compressed air as well as many other gases (for list of suitable gasses please contact us or your local dealer) where the risk for corrosion is very high or where stainless steel housing is required. To meet the required gas quality appropriate filter element must be installed into filter housing. Fluid group 1 on request.

WFIF welded stainless steel filter housings with flange connections are designed filtration of compressed air as well as many other gasses where the risk for corrosion is very high or where stainless steel housing is required. Required compressed air quality according to standard ISO 8571-1 can be achieved with 8 different grades of filter elements (PI, PIW, PN, PP, PR, PM, PS and PA). Fluid group 1 on request. Optional external condensate drains should be used for efficient condensate draining from filter housing.

B-AIR™ point of use filter set is designed for high efficient preparation of top quality breathing air. On request B-AIR™ filter set can be supplied with wall mounting brackets, pressure regulator and quick couplings. WARNING! Breathing air filter set B-AIR is not declared as CO₂ and CO removal filter. Despite that B-AIR comprises filter element which can reduce CO content.

X-DRY 300-1050 modular adsorption dryers are designed for continuous separation of water vapour from compressed air thus reducing dew point. Operation of dryer requires two columns operated alternately. Adsorption takes place under pressure in first column while second column regenerates with a portion of already dried compressed air at ambient pressure. A dryer consists of two columns, filled with desiccant beads, controller with LCD display, valves, manometers, support construction and suitable filter housings with the required filter element. Proven robust design enables efficient and reliable operation, fast installation and simple maintenance.

BF HP filters are designed for protection of the downstream compressed air system and equipment against defects and other failures in high pressure applications. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 25 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

BF filters are designed for protection of the downstream compressed air system and equipment against defects and other failures. Due to their robust welded carbon steel construction, are used for installation in heavy industrial applications with high air flows.They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 6 different grades of filter elements (B, P, R, M, S and A). Optional external condensate drains should be used for efficient condensate draining from filter housing. Fluid group 1 on request.

AAF compressed air filters are designed for the protection of the downstream compressed air system and equipment with lower airflows against defects and other failures. They ensure high efficient removal of solid particles, water, oil aerosols, hydrocarbons, odour and vapours from compressed air systems up to 16 bar. Required compressed air quality according to standard ISO 8571-1 can be achieved with 5 different grades of filter elements (P, R, M, S and A). Optional internal and external condensate drains should be used for efficient condensate draining from the filter housing.< /br> <b>Features</b> <ul> <li>A wider range of different models for different flow rates, including larger 2” and 3” sizes. </li> <li>Convenient design for assembly of several filters and for wall mounting</li> <li>AVELOCK antivibration element lock system<li> <li>Needle felt drainage layer instead of foam for improved thermal resistance<li> <li>X2-COAT internal anti-corrosion protection<li> </ul>