Results for
PASCHAL-WERK G. MAIER GMBH
Germany
With its robust but lightweight steel frame, the e-deck can be used anywhere a crane cannot reach. All of our e-deck formwork is compatible with our Modular universal formwork. That means that connections and transitions between wall and slab or beams can be created without difficulty.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
The flexible slab formwork is ideally suited for ceilings in residential and industrial construction due to the optimal adaptation to any floor plan, the possibility of using any slab thicknesses and the lightweight individual parts. With only three main components, the formwork system also impresses with optimised material deployment.
Request for a quoteSEMIN
France
TECHNICAL DEFINITION Levelling filler for vertical substrates and for use on ceilings for poured concrete or pre-cast slabs. Ideal for the preparation of pre-cast slabs, formwork concrete and for the renovation of textured finishes or fibreglass with a paint finish. TECHNICAL CHARACTERISTICS • Dry extract : 75% • Density : 1.86 • VOC content : less than 1g/l COMPOSITION AND APPEARANCE Water, calcium carbonate, dispersant, bactericide, fungicide, cellulosic fibres, polyacrylates, clays, acrylic dispersant. AMOUNT REQUIRED From 2 to 4 kg for the first coat. From 1.5 to 2 kg for the second coat. APPLICATION SEMIN AIRLESS EXTREM filler is sprayed using the Airless pump or rotor machine/Flat spray stator in 2 coats. The first coat must be levelled using a 60 cm blade or levelled with a straight edge. After drying, the second coat must be smoothed using a blade.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Our slab edge formwork is made up of three components: bracket, hook headed bolt connection and stop. In addition to slab edges, with and without overhangs, the slab edge formwork (bracket) can also be used for forming floor slabs.
Request for a quotePASCHAL-WERK G. MAIER GMBH
Germany
Reliable lateral protection according to safety standard EN 13374 - For a variety of applications (wall formwork, slab formwork, window and door openings, concrete slabs and exposed slab edges and upper wall edges) - Quick, easy assembly - According to safety standard EN 13374 - Use with a protection fence or wooden planks is possible A key element is the railing post lateral protection, which can be used for a range of applications when combined with various connecting parts. Thanks to the flexible application of the lateral protection system, you will save on investment and storage costs.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PETER EISENREICH GMBH
Germany
"installation into existing concrete components # slab stop-end formworks #fall protection holders # push-pull props, supports etc.# solution to ""for gotten"" formwork sleeves "
Request for a quoteKBC DIFFUSION
France
KBC, the formwork specialist, offers you innovative, efficient, light and fast slab formwork.
Request for a quotePROMSTROIKONTRAKT
Russia
PSK-TOP shoring towers are ideal for mobile work with slab formwork (with a standard tower load of at least 40 kN, i.e. up to 160 kN per tower) or for supporting already finished monolithic structures. System – collapsible, multi-purpose, inventory, steel. •PSK-Top can be used for big heights and high loads: safe load transfer to the ground •Shoring Tower PSK-TOP consists of only 5 elements. In some cases, PSK-Top Stacking Tower can work without diagonals, then only 4 elements are enough. •Easy and simple assembly without bolts or pins – without any tools at all. The stacking frame weighs less than 7 kg which facilitates ergonomic and fast assembly. •Due to accessories preparation will not be carried out and the tower can be installed by a single worker, time and labour force are saved. •After installation towers can be transported by crane. •The system is ideal or use in complex structures, including bridges and stadiums.
Request for a quotePROMSTROIKONTRAKT
Russia
The slabs formwork on the desk helps to speed up the working process. Thanks to universal elements it can be used for different requirements at the construction site. The main components of the system are props. The main technical features of telescopic props: •working ranges height along allow tying-in to projects of any complexity •tower load carrying capacity can vary from 1 up to 3 tons •foundation nut is made of wrought iron recommended by European institutions for use at high shock loads in construction Shuttering telescopic props are designed to support horizontal shuttering liners when casting bridgings and use as temporary supports for fixing the horizontal elements during mounting and dismantling of various structures. Set of different height along supporting telescopic props allows performing in situ concrete works at any heights of up to 5.3 m.
Request for a quotePROMSTROIKONTRAKT
Russia
Universal deck form PSK-CUP combines the functions of deck form and scaffolding. The deck form PSK-CUP corresponds to the space frame which forms the rigid frame without joints which does not require additional stabilization by diagonal connections in most cases. It is assembled from the tubular members: vertical and horizontal, lower threaded lifting jacks and upper threaded uniforks, connection elements, it may be completed with fixation elements. Vertical elements are the basic bearing components of the framework on vertical plane. There are six basic dimension. They are joined with the help of connection elements according to the principle “tube-in-tube”. In every 500 mm the vertical elements have welded cup connections – “lower cup” produced from the high-quality steel, with the attached mobile cups – “upper cup” produced from ductile casting. They provide support for horizontal elements. The horizontal elements provide the framework rigidity.
Request for a quoteINTERFAMA
Italy
EVODECK this system is suitable for all types of ceiling such as: solid concrete, floor slab (paneled surfaces), mixed floor (concrete and masonry) and lightweight slabs. The drop head permits early stripping already after 2 to 5 days and most of the formwork equipment can be reused right away in the next concrete operation.
Request for a quoteINTERFAMA
Italy
Velox is the girder slab formwork for all kinds of layouts. Meeting individual requirements regarding the concrete finish is no problem because it is suitable for a variety of surfaces, such as massive concrete, paneled surfaces, hollow stone floor and as well as for styrofoam slab. Two VELOX design versions are available for use and both versions can be assembled and dismantled easily and safely by 2 people only.
Request for a quoteResults for
Slab formwork - Import exportNumber of results
13 ProductsCountries
Company type