Single-phase electric motors - Import export

CM 520 - Portable electric lift, load capacity: 140 kg up to 3 m 130 kg at 4 m 90 kg at 4.9 m Low weight portable device - only 38 kg Immediate use on site Put into action without any tools Only 2 elements: the mast and the plate With 4 individually adjustable feet Use on stairs or sloping ground Special foot kinematics for working close to the wall (UPTER system) 230 V single-phase electric motor Variable speed at will Integrated torque limiter Manual use possible in the event of a power outage using the supplied crank or screwdriver on batteries

BD 400 is the universal portable electric lift for raising heavy loads safely. Thanks to its unique construction, lifting loads as close as possible to a wall is also possible It is the lifting device suitable for all construction sites or workshops Thanks to its very small footprint and low weight, it can be easily transported for immediate use. Mast with aluminum anti-twist rails Only 2 elements: the elevator and the lifting accessory Immediate use on site, activated in a few seconds without tools 230 V single-phase electric motor with speed variator Possible use in the event of a power outage using the crank provided (or battery-powered screwdriver) Integrated torque limiter, cuts off lifting in case of overload Easy transport on site thanks to transport wheels Stabilizer with adjustable length wheels By design, the feet are placed in front of or behind the mast (for facade work)

"2 CONDENSATORS SINGLE-PHASE MOTORS (OUR CODE: MML) - with centrifugal coupler or electronic relay - Motors available in 230V - 1500 or 3000t/min - Aluminium frame - Multiposition - IP55 protection - Shape B3-B5-B14 -B35-B34 - Stored between 0,37 and 3,7kW"

"SINGLE-PHASE MOTORS 1 CONDENSATOR (OUR CODE : MMY) - Motors available in 230V - 1500 or 3000t/min - Aluminium frame - Multiposition - IP55 protection - Shape B3-B5-B14 -B35-B34 - Stored between 0,37 and 3,7kW"

A precise 90° saw cut is a basic requirement for orbital weld preparation. Robust saws for all wall thicknesses Powerful drive motor Uniform and easy feed control by means of handwheel Different chamfering blades mountable Right-angled saw cut 4, 5 or 6 clamping jaws made of stainless steel as well as reducing jaws Due to concentric clamping no deformation with thin-walled pipes Also for cutting off pipe bends Quick-release fastener for easy changing of saw blades Chip removal during cutting by means of integrated brush Convenient adjustment of plunge depth by means of feed wheel Technical Data: Size range in mm: OD 6 – 220mm Size range in inch: 0.236″ – 8.661″ Wall thickness: 1 – 8mm Electric drive: Single-phase AC motor Mains voltage (input): 200/220VAC (50/60Hz) Power: 1000W / 4.5A Protection class: II Speed control: 6-step control Weight: 47 - 77kg Package includes: Tube saw with electric drive One saw blade One bottle of saw blade lubricating oil

It is an easily adjustable and useful machine. Work efficiency is high. Our warehouses are produced from polyethylene against the harmful effects of pesticides. In gasoline models, HONDA GX160 model gasoline engine is used. In the electric model, a single-phase electric motor is used. The water filter can be cleaned easily. Thanks to the regulator, the pressure can be adjusted according to demand. In this way, spraying can be done at the desired flow rate. There are level indicators on both sides of the tank. It can be easily connected to the tractor with the trailer tongue with pull type wheel jack system.

Osmak Rulo manufactures 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 meters standard size loading conveyor belts with special damping system, also desired lengths are available upon request.The bands are manufactured with properties that can work back and forth. The upper and lower band lifting system, braking and a geared motor is used. 380 volt or 220 Volt (single phase) electrical motors used on Osmak Conveyor belts. Conveyor belt width 600 mm the standard production. However, the width of the band can be narrower or wider upon request. Please do not hesitate to contact us for more information. Custom design orders are welcome with technical drawing.

With BPS internal drain system EN - These series of professional high pressure pumps are the suitable solution, with high quality and safety standard, for all requirements to build professional misting systems with flow rates ranging from 1 up to 6 l/min with single phase electric motor. High quality components like ceramic pistons, brass head, long lasting professional seals, assure smooth operation and a long-lasting reliability. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation. QES units are the best solution for applications where noise is a matter of disturb. BPS internal drain system avoids to waste water during drain cycles.

With new SSC safety system EN - These series of professional high pressure pumps are the suitable solution with high quality and safety standards to build professional misting and humidification systems with flow rates ranging from1 up to 6 l/min with single phase electric motor. All the components used in Arctic series include high quality and best materials assuring trouble less operation and long durability. Our built-in digital timer offers full control of the efficiency of the fogging system by direct adjustment of the frequency of mist spray. A built-in humidity and temperature controller grants a complete control on environment conditions and a quick and simple installation of humidification systems. QES electrical motors assure the full efficiency with lowest power consumption and low noise operation. SSC safety features avoid accidental flooding by stopping the pump in the event of leakages.

Outdoor cooling made easy EN - These series of household high pressure pumps are the suitable solution with high quality and safety standard for all requirements to build professional misting systems with flow rates ranging from 0.5 up to 0.9 l/minwith single phase electric motor. High quality components like ceramic pistons, aluminum head, long lasting professional seals, assure smooth operation and a long-lasting reliability. Our built-in digital timer offers full control of the efficiency of the misting system by direct adjustment of the frequency of mist spray increasing the advantages on water and energy consumption with savings up to 70%if compared to standard systems. This pump is suitable for small and medium outdoor cooling systems thanks to the special programming of the built-in timer that allows you to set work and pause cycles in seconds. Its automatic drain solenoid valve allows a perfect drain of the pipeline and assures optimal anti-drip system performances.

"The high voltage motors can be made of cast iron or welded steel (lighter solution). HIGH VOLTAGE MOTORS WITH CAGE: - Three-phase motors with cast iron cage - High voltage motors between 3 and 13.8kV - Power from 160kW to 10MW - IP55 or IP23 protection - Efficiency IE3/IE4 (tomorrow IE5) - Standard or custom sizes are available for sale - 2-4-6 poles stocked motors up to 1,2MW, IC411 cooling - Customized motors according to your specifications or to replace an existing motor will be delivered to you - Cooling mode IC411-IC416-IC511-IC611-IC616-ICW81 - Ball or sleeve bearings"

2-phase stepper motors Our 2-phase stepper motors are reliable and low-cost drives with a long service life. They are available in different sizes and types of power output, are continuously developed and are thus suitable for a variety of applications. AC servo motors The AC servo motors meet the highest demands regarding dynamics and accuracy and are used if dynamic, exact positioning or smooth running characteristics are required. The different types of power output and sizes cover the most diverse requirements. The benefits at a glance Highly dynamic High efficiency Long service life

CATEGORY : MAGNET ALTERNATOR, WIND TURBINE, WATER TURBINE 20,000 W PM ALTERNATOR 500 RPM - SUITABLE FOR WIND-WATER TURBINES --- PRODUCT INFORMATION Voltage: 220V/380V Hz : 50Hz Revolution : 500 Required torque at full power: 382 NM Weight :70 kg Working efficiency: 89% Desired load at full capacity: 26 HP --- PRODUCT FEATURES - High performance neodymium magnets - Maintenance-free and long-lasting operation feature with low cycle advantage - 20 years working life - High efficiency - Ability to work 24/7 without overheating

Submersible motors from oddesse are used as pump drive for applications with special requirements, such as in mining, utilisation of geothermal energy as well as in offshore and marine technology. EXECUTIONS - Three-phase asynchronous motors for 50 or 60 Hz and voltages up to 1,000 V - Water-filled motors with rewindable stators, dynamically balanced and with high resistance to thermal stress High-quality thrust bearings that operate in both rotation directions and possess a high load-bearing capacity - Water-lubricated radial bearings for a horizontal and vertical motor application - Windings for temperatures up to 80° C of the pumped medium available - Speed regulation between 30 and 60 Hz via frequency converter possible - High-quality materials for application in service, industrial and seawater PERFORMANCE RANGE (AT 50 HZ) Up to 45 kW/60 HP with 6" motors Up to 132 kW/175 HP with 8" motors Up to 220 kW/300 HP with 10" motors Up to 400 kW/550 HP with 12" motors

Advantages High-resistance: IP 55 motors with aluminum frame High efficiency: IE2 and IE3 class on direct on-line and inverters, NEMA Premium. Compact: Space-saving. General applications Available on short delivery.