Shrink film - Import export

Well-protected and clean packaged goods reach their destination trouble-free. Dürrbeck shrink film offers the ideal transport protection and is suitable for bulky items, as well as packaging single products, delicate food or books, flyers or bundled items. This variety of uses is all thanks to shrink film’s most important quality: its ability to snugly wrap any product precisely and securely.

A heat-shrink film that protects packaged products from various environmental damages. The film softens and shrinks when exposed to heat; the rapidly cooling material then provides good transverse and longitudinal strength to the product. It can be produced as a tube or flat film to meet customer requirements, and can be used also not only for manual heat shrinking but on lines with a heat tunnel for automated packaging.

Shrink film is characterised by low sealing temperature, high tensile strength and very high transparency. Production range from 50 to 2500 mm in width. Thickness from 0.020 to 0.300 mm, made in three- layer co-extrusion technology. The hoods perform insulating functions. It is an ideal solution for the protection of materials, susceptible to all weather conditions such as moisture, dust or mud. Standard hoods – two side folds “Y” type hoods – one upper fold

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

The transport and storage of large corrosion-sensitive merchandise in the open air calls for special protective measures. The multifunctional VALENO CAMPO film developed by EXCOR possesses all the properties necessary, combining as it does corrosion protection with the barrier properties of a coextrusion shrink film. VALENO CAMPO comprises an inner layer with EXCOR VCI corrosion protection, a central barrier layer to prevent water vapour from penetrating and an outer layer providing UV stabilisation. After all, you can never be too safe.

For protecting and preserving your goods, tubular film packing of Gordopack is your best option. Our tubular protective films secure various objects and packed food items during transportation, storage or handling due to their very different designs and numerous fields of application. Ranging from furniture to food or news magazines, product packaging ensures that all goods reach the customer without damage or contamination. Product can range from HDPE/ MDPE/ LDPE/ PCR with straight-cut edges, perforated on roll, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

For protecting and preserving your goods, flat film packing of Gordopack is your best option. Our flat film of our company covers the needs of a wide range of applications in private households, but also in industry and trade. The flat films are suitable for manual or automated packaging of goods as well as for covering and protecting various goods. The assortment of flat films ranges from asparagus foils, flow packaging films to top sheets. According to our customers' wishes, we also equip the flat films with technical additives and colours Product can range from HDPE/ MDPE/ LDPE/ PCR with straight-cut edges, perforated on roll, needled, with antistatic agent, UV-stabilizer/absorber, symbol marking, Corona treatment and in various colours.

Gas hand tool for thermo shrinking Hornet, high power (until 90 Kw), but very light and handy with practical handle with fast lever gas and electronic ignition. The high power and ease of use allow a fast shrinking of plastic films of each thickness and the realization of packaging even large. Raptor it's available with power of 70 Kw and 90 Kw. The main areas of application are: Packing : Welding / retraction of packaging also large Boating : Realisation of coverages in plastic film for boat storage Building : Welding and retraction of plastic film for protective scaffolding Environment : Welding of plastic film for coating for containment tanks

MODULAR LINE SEMIAUTOMATIC ANGULAR PACKAGING MACHINES Semi-automatic, angular machines offer maximum packaging flexibility, and a quality product at a competitive price. MODULAR 50S and MODULAR 70, which have recently been updated and revised, can be used to package products using any material, producing highly attractive results. MODULAR LINE uses an electronically controlled sealing system and the very latest safety devices. The lines can be used in automatic or semi-automatic mode, and the operating programs can be customised in order to simplify the packaging process and maximise productivity. MODULAR 50S and MODULAR 70 can also be used with the TUNNEL.

L-SEALERS BSF SERIES The manuals bench L-sealers BSF series are very simple and practical. Allow to obtain the envelopes perfectly sealed, using standard fold film. They are suitable for use in laundries and textile sector in general and in the paper industry, but are also helpful in the food industry for the packaging of the bread. Sealing bar with manual operation. The choice of the machine must take into account that: the dimensions of the box (height + depth) must not exceed the maximum width of the reel mounted on the machine (depending on the model) also considering that there must always be at least 50 mm of waste. To confirm that the machine is suitable, we always advise you to contact us and report the measurements of the boxes to be packaged.

TF 6540 FA SHRINK WRAPPER MACHINE WITH PNEUMATIC PUSHER TF 6540 FA semiautomatic sleeve sealing machine with pneumatic pusher suitable for shrink packing both single object and combined. Shrink packing machine is used in many industrial sectors such as printing, pharmacy, floor, beverage, beer etc. and it’s suitable for all kinds of shrink films such as PVC, POF, PP, PE etc The machine is equipped with motorized reel holder and stabilizer plate for light parcels. After the process of sealing & cutting, the products enter the shrink tunnel BS 5540 M automatically.

Skinpack packing machine at semiautomatic cycle to package objects of either small, medium or large size, between cardboard and transparent plastic film. The skinpack package allow immediate display of the product, possibility of both advertising in colour on the cardboard surfaces, practicality of the packaging, which can be hung in showcases. Safety protection with sensors. The cardboard support can be replaced with a sheet of bubble wrap (bubble polyethylene). CE-approved machine with low voltage controls, electrical panel with Siemens PLC, safety module (Pilz), safety protection on the work area with safety sensor (the movement of the frame descent only occurs with closed protection, the movement of ascent is driven by a dual control). The packaging machine mod. FP-390 has a limited energy consumption as the resistors are activated only at the time of packaging (on the other Skinpacks the resistances are always on) and there is no risk of overheating.

This fully automatic sleeve labeling machine is suitable for various kinds of bottles,like round bottles, square bottles,oval bottles,etc.This machine can automatically feed and cut film,and it can sleeve labels precisely,greatly saving labor and improving work efficiency.The machine can be widely used for beverage bottles,cosmetic bottles,shampoo bottles,etc. The touch screen control panel makes the working parameter is visual,the precise adjustment can be easily achieved according to operation Equipped with high quality electric eye,It can pull film automatically,it is more convenient and easier to operate the machine. The bottle separating component can help to separate bottle and adjust bottles distance,ensure the bottle can be labeled in order,improve the labeling effect. Rotary knobs are designed for adjusting the position of different mechanisms, make sure the machine can sleeve label precisely.

This fully automatic sleeve labeling machine is suitable for various kinds of bottles,like round bottles, square bottles,oval bottles,etc.This machine can automatically feed and cut film,and it can sleeve labels precisely,greatly saving labor and improving work efficiency.The machine can be widely used for beverage bottles,cosmetic bottles,shampoo bottles,etc. The touch screen control panel makes the working parameter is visual,the precise adjustment can be easily achieved according to operation Equipped with high quality electric eye,It can pull film automatically,it is more convenient and easier to operate the machine. The bottle separating component can help to separate bottle and adjust bottles distance,ensure the bottle can be labeled in order,improve the labeling effect. Rotary knobs are designed for adjusting the position of different mechanisms, make sure the machine can sleeve label precisely.

The company He-ja is specialized in shrink tunnel construction suitable for your product and offers a total of 40 different tunnel variants for dry as well as wet rooms. Our standard hood width is 500-1500mm wide and our standard tunnel lengths are 1,800, 2,200, 2,800 and 3,600mm. Should your product require a special solution, we will certainly find the right technical design for it. The heating power is between 15-36KW depending on the size of the hood and tunnel length. Our bestseller shrink tunnel type T600 with a total length of 1.800mm (hood length 1.200mm) and a hood height up to 300mm shrinks 80my PE shrink films without any problems with a heating power of 15KW at a capacity of up to 10 repackages/min. Thanks to the sophisticated technical design of the control components and the perfect balance between air flow and temperature, you can achieve top values in your energy balance. The actual consumption is reduced by up to 35% in production operations.

BS-5540M-ECO SHRINK TUNNEL - complete with wire mesh carpet for small products Shrink tunnel with high thermal insulation and ample power for all types of shrink film including the film in PE. Maximum thickness film thermoretracting 100 my. In conjunction with the angular sealer BS 8060 L is a complete system for packaging bags, bottles, cans and many other products with high weight. Of course it can be used separately or in combination with other machines. MAIN FEATURES - Finned heaters; - Dual fan for air circulation; - High thermal; - Conveyor belt with metallic mesh; - Conveyor with adjustable speed; - Fan for cooling packages; - Structure with wheels and adjustable feet.

As semi-automatic and fully automatic machines in a well thought-out robust construction, easy to operate and virtually maintenance-free, they economically pack single, collective and multiple packages (with and without tray support) in shrink film, e.g. cans, bottles, bundles, cartons, as well as long objects such as boards, doors, bars, profiles, etc. The welding width ranges from 600 – 1500 mm and other formats are possible for special constructions. The film web formed by two rolls wraps around the package in the form of a banderole. After the welding process, a discharge belt transfers the banded product into a shrink tunnel.

In addition to common applications such as shrink BOPP tobacco films, CONSTAB Modifier masterbatches can also be used for other applications. They provide a whole range of benefits - from labels to transparent food packaging. For example, they contribute to improved mechanical and optical properties, create an increased gas barrier or better processability.

System for bundling coin rolls of 5 or 10 pieces and shrinking in PE film. Elements of serial production: - Robust steel frame, painted grey in RAL 9006 - Welding frame with Teflon-coated heating rods with constant temperature controlled by temperature controllers with digital display - Motorised unwinding of the coil - Control generated by a programmable logic controller - Touch screen display - Storage of programmes - Automatic change of designations - Detection of the end of the spool - Translucent housing - Material according to current EC standards Foils that can be used: Polyethylene

Shrink flat films on rolls for shrinking in a wide range of packaging sizes.

30"x5 metres rolls of gift wrappers. Each roll measures 30 inch width x 5 metres length which ensure you have sufficient paper to wrap all your large presents as well. Created with high-quality paper materials, thick and not easily tear or rip. Packed with shrink film to prevent wrapping paper from scratches and reduce dust. Perfect for birthdays, party, gifts wrap, holiday and more. Wrap gifts in chic printed paper to add vitality to your gifts. It is also great for craft project, wall and bulletin board decorations, greeting card decorations.

20"x29" Gift Wrapper Sheets. Each sheet measures 20 inch width and 29 inch length which ensures you have sufficient paper to wrap all your small and medium. Created with high-quality paper materials, thick and not easily tear or rip. Packed with shrink film to prevent wrapping paper from scratches and reduce dust. Perfect for birthdays, party, gifts wrap, holiday and more. Wrap gifts in chic printed paper to add vitality to your gifts. It is also great for craft project, wall and bulletin board decorations, greeting card decorations.

The shrink wrapper works with shrink films which provide high quality, wrinkle-free packaging that adapts the film to the shape and dimensions of the product. Applications: Food products, medicines and medical products, cosmetics, metal products, chemicals, etc...

3P Shrink Wrap Film is an LDPE coextruded blown lm, serves as protective wrapping for articles of merchandise. It consists of clear plastic lm that is wound around the articles and then shrunk by heat to form a sealed, tightfitting package (Shrink package). Polyethylene (PE) Plain & Printed Shrink Films used as Multipack are much in demand for the Juice & Beverages Industries. PE Plain & Printed Rolls are for the packaging application (FFS) in Food & Detergent industries a very fast growing Packaging sector Worldwide.

Slice Stretch film, HAND TYPE STRETCH FILMS FOOD STRETCH FILMS COLORED STRETCH FILMS STRETCH MACHINE TYPE SLICED STRETCH FILMS BULK GARBAGE BAG ROLL GARBAGE BAG BUBBLE WRAP BUBBLE WRAP ALUMINIUM BUBBLE WRAP BAG BUBBLE WRAP ANTI-STATIC BUBBLE WRAP NON WOVEN BUBBLE WRAP SHEETS DUCT TAPE MACHINE TYPE DUCT TAPE PRINTED TAPE ROLL FLAT FILM FLAT FILM BAG SHRINK FILM ATI-STATIC BAGS PALLET BAG PLASTIC BAG BANDED BAG INNER BOX BAG MATTRESS BAG BARREL LINERS WASTE BAG LDPE BAG From Türkiye

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.

Bi-directional shrinkage: his is determined during production by the choice of the extruder and the blow ratio. As a result, the shrinkage properties and the mechanical properties of a film are determined. VeriSafe ® films have similar contraction strength, both vertically and horizontally. This is unique on the market and gives our film unique features: - by heating - resulting in a perfect clamping of the film and also a permanent shrinkage force for a long time and therefore a super resistance to gusts of wind (guarantee up to 10 Beaufort). Welding properties: are determined by the raw materials used, as well as the capacity of the extruder. The welding is very important and must be permanent for long time. Welding's which dissolve over time weaken the tension of the film and thus also the stability of the work. Puncture resistance: this is determined by the blow grade of the extrusion and by the chemical composition.